Steel Products Prices North America
Steel Production Dips for the Week
Written by Tim Triplett
July 5, 2017
Domestic raw steel production totaled 1,717,000 net tons in the week ending July 1, off 0.7 percent from the previous week and down 1.5 percent from the same week in 2016. The mill capacity utilization rate was 73.6 percent, down from 74.2 percent the prior week and 74.5 percent the same time last year, reports the American Iron and Steel Institute in Washington.
Adjusted year-to-date production through July 1 totaled 45,070,000 net tons, up 2.1 percent from the same period last year.
Following is production for the July 1 week by district: Northeast, 204,000 tons; Great Lakes, 668,000 tons; Midwest, 168,000 tons; South, 608,000 tons; and West, 69,000 tons, for a total of 1,717,000.
The raw steel production tonnage in this report is estimated. The figures are compiled from weekly production tonnage provided from 50 percent of the domestic producers combined with monthly production data for the remainder. Therefore, this report should be used primarily to assess production trends. The AISI monthly production report, available by subscription, provides a more detailed summary of steel production based on data supplied by companies representing 75 percent of U.S. production capacity.
Note: Capability for second-quarter 2017 is approximately 30.3 million tons, compared to 30.4 million tons for the same period last year and 30.0 million tons for first-quarter 2017.
Below is a graphic showing the weekly raw steel production history. To use the graph’s interactive capabilities, you must view it on our website. You can do this by clicking here. If you need help navigating the website or need to know your login information, contact us at info@SteelMarketUpdate.com or by calling 800-432-3475.
Tim Triplett
Read more from Tim TriplettLatest in Steel Products Prices North America
Galvanized buyers report solid demand, balanced inventories
Galvanized buyers reported solid demand and balanced inventories this week and were anticipating the sheet price increase announced by Cleveland-Cliffs on Wednesday.
HRC vs. CRC price spread jumps in second week of new year
The spread between cold-rolled coil (CRC) and hot-rolled coil (HRC) prices jumped during the week of Jan. 8 as cold rolled tags continued to rise while hot rolled tags held steady.
Cliffs increases sheet prices again, seeks $1,150/ton HRC
Cleveland-Cliffs is now targeting base prices of $1,150 per ton for hot-rolled coil (HRC), according to a press release on Wednesday morning, Jan. 3.
Cliffs moves sheet prices higher, seeks $1,100/ton HRC
Cleveland-Cliffs is now targeting base prices of $1,100 per ton ($55 per cwt) for hot-rolled coil (HRC).
SMU price ranges: Sheet surge continues on limited spot availability
Sheet prices shot higher again this week on the heels of another round of mill price increases as well as on reports of production and supply chain issues at certain domestic producers.