Steel Products Prices North America
Raw Steel Production Ticks Upward: AISI
Written by Becca Moczygemba
October 3, 2022
Raw steel production by US mills saw a slight uptick. Last week’s utilization is only modestly elevated compared to the previous week’s. Utilization rates haven’t eclipsed the 80% mark in thirteen weeks, the longest run since the pandemic.
Domestic output was 1,700,000 net tons in the week ending Oct. 1, while capacity utilization was 77.1%, according to the latest data from the American Iron and Steel Institute (AISI).
US output was up 1% from the week prior and down 7.9% from last year’s production of 1,839,000 net tons. Mill capacity utilization last week was 0.7 percentage points above the prior week and 3.9 percentage points below the same period one year ago when utilization was 81%.
Adjusted year-to-date production through Oct. 1 totaled 66,118,000 net tons, at an average utilization rate of 79.6%. That’s 4.1% below the same period last year when production was 71,047,000 net tons and capability utilization was at 81%, AISI said.
Output fell in two out of the five regions last week. The Great Lakes region saw the sharpest decline in tons WoW, down 16,000 net tons, or -2.8%. The Northeast saw the highest percentage decline, down 4.2% (-6,000 net tons).
Production by region for the week ending Oct. 1 was as follows: Northeast, 138,000 tons; Great Lakes, 549,000 tons; Midwest, 196,000 tons; South, 746,000 tons; and West, 71,000 tons—for a total of 1,700,000 net tons, up 17,000 net tons from the prior week.
Note: The raw steel production tonnage provided in this report is estimated. The figures are compiled from weekly production tonnage provided by approximately 50% of the domestic production capacity combined with the most recent monthly production data for the remainder. Therefore, this report should be used primarily to assess production trends. The AISI production report “AIS 7,” published monthly and available by subscription, provides a more detailed summary of steel production based on data supplied by companies representing 75% of US production capacity.
By Becca Moczygemba, Becca@SteelMarketUpdate.com
Becca Moczygemba
Read more from Becca MoczygembaLatest in Steel Products Prices North America
US HR prices rebound, no longer near parity with imports
US hot-rolled coil and offshore hot band moved further away from parity this week as stateside prices have begun to move higher in response to mill increases.
Galvanized buyers report solid demand, balanced inventories
Galvanized buyers reported solid demand and balanced inventories this week and were anticipating the sheet price increase announced by Cleveland-Cliffs on Wednesday.
HRC vs. CRC price spread jumps in second week of new year
The spread between cold-rolled coil (CRC) and hot-rolled coil (HRC) prices jumped during the week of Jan. 8 as cold rolled tags continued to rise while hot rolled tags held steady.
Cliffs increases sheet prices again, seeks $1,150/ton HRC
Cleveland-Cliffs is now targeting base prices of $1,150 per ton for hot-rolled coil (HRC), according to a press release on Wednesday morning, Jan. 3.
Cliffs moves sheet prices higher, seeks $1,100/ton HRC
Cleveland-Cliffs is now targeting base prices of $1,100 per ton ($55 per cwt) for hot-rolled coil (HRC).