Steel Products Prices North America
Weekly Raw Steel Production Dips 1.4 Percent
Written by Tim Triplett
November 7, 2017
U.S. raw steel production for the week ending Nov. 4 totaled 1,715,000 net tons, a 9.0 percent increase from the same period last year, but down 1.4 percent from the prior week. The mill capability utilization rate for the week averaged 73.6 percent, down from 74.6 percent the prior week and 68.7 percent the prior year, reports the American Iron and Steel Institute in Washington.
Adjusted year-to-date production through Nov. 4 totaled 76,474,000 net tons, up 3.9 percent from the same period last year. The average mill capability utilization rate for the year to date was 74.6 percent, up from 71.1 percent in 2016.
Following is production by district for the week of Nov. 4: North East: 187,000 net tons; Great Lakes, 642,000 net tons; Midwest, 159,000 net tons; South, 653,000 net tons; and West, 74,000 net tons, for a total of 1,715,000.
The raw steel production tonnage provided in this report is estimated. The figures are compiled from weekly production tonnage from 50 percent of the domestic producers combined with monthly production data for the remainder. Therefore, this report should be used primarily to assess production trends. The AISI monthly production report provides a more detailed summary of steel production based on data supplied by companies representing 75 percent of U.S. production capacity.
Mill capability for fourth-quarter 2017 is approximately 30.6 million tons, compared to 30.7 million tons for the same period last year and 30.6 million tons for third-quarter 2017.
Below is a graph showing the history of weekly raw steel production. You will need to view the graph on our website to use its interactive features, you can do so by clicking here. If you need assistance logging into or navigating the website, please contact our office at 800-432-3475 or info@SteelMarketUpdate.com.
Tim Triplett
Read more from Tim TriplettLatest in Steel Products Prices North America
SMU Price Ranges: Sheet Rebounds – Sustainable Rally or Dead-Cat Bounce?
Sheet prices rose this week on the heels of a price increase announced by Cleveland-Cliffs last week that was quietly followed by other mills.
Plate Report: Mills Hold the Line Despite Slowing Demand
US plate prices have been relatively flat this year, especially when compared to sheet products. Case in point; SMU's plate prices stands at $1,455 per ton ($72.75 per cwt) on average, down 7% from a $1,560 per ton peak in April. Our HRC price is at $645 per ton, down 44% from an April peak of $1,160 per ton.
Nucor Maintains Plate Prices
Nucor Corp. will keep plate prices unchanged with the opening of its November order book.
Most Mills Still Willing To Negotiate Lower Sheet and Plate Prices: SMU Survey
The overall steel mill negotiation rate remained level this week vs. two weeks earlier, but plate’s rate fell by 15 percentage points, according to SMU’s most recent survey data.
SMU Price Ranges: Sheet Declines Moderate – Meaning or Noise?
Hot-rolled coil prices were down again this week, continuing a streak of week-over-week (WoW) declines that began in early/mid-July.