Steel Products Prices North America
SMU Price Ranges & Indices: Prices Drifting
Written by John Packard
October 3, 2017
Flat rolled steel prices continue to “drift,” with some items drifting lower, some staying the same and cold rolled actually increasing by $5 per ton. One commercial officer at a steel mill told SMU that in his view the range has shrunk for the products they produce. Even so, “We are finding business, and it seems inventories are being drawn down…but not in balance yet.”
SMU has found, in some products, that the spread between the lowest base available and the highest has widened. This could be for geographical reasons where prices in the Midwest are different than those found in the Southwest or Southeast.
Here is how we see prices this week:
Hot Rolled Coil: SMU price range is $580-$630 per ton ($29.00/cwt-$31.50/cwt) with an average of $605 per ton ($30.25/cwt) FOB mill, east of the Rockies. The lower end of our range declined $10 per ton compared to one week ago while the upper end remained the same. Our overall average is down $5 per ton compared to last week. Our price momentum on hot rolled steel is pointing to Lower indicating prices are expected to decline over the next 30 days.
Hot Rolled Lead Times: 2-4 weeks
Cold Rolled Coil: SMU price range is $760-$810 per ton ($38.00/cwt-$40.50/cwt) with an average of $785 per ton ($39.25/cwt) FOB mill, east of the Rockies. The lower end of our range remained the same compared to last week while the upper end rose $10 per ton. Our overall average is up $5 per ton compared to one week ago. Our price momentum on cold rolled steel is pointing to Lower indicating prices are expected to decline over the next 30 days.
Cold Rolled Lead Times: 5-8 weeks
Galvanized Coil: SMU base price range is $38.00/cwt-$40.50/cwt ($760-$810 per ton) with an average of $39.25/cwt ($785 per ton) FOB mill, east of the Rockies. The lower end of our range increased $10 per ton compared to one week ago while the upper end declined $10 per ton. Our overall average is unchanged compared to last week. Our price momentum on galvanized steel is pointing to Lower indicating prices are expected to decline over the next 30 days.
Galvanized .060” G90 Benchmark: SMU price range is $838-$888 per net ton with an average of $863 per ton FOB mill, east of the Rockies. A note to our readers who also review other galvanized indexes: Right now, not all indexes are using the same G90 zinc coating extra on benchmark .060″ material. SMU uses $78 per ton, while at least one other index is using $86 per ton, which reflects the price change made by NLMK USA. SMU has not yet made a change as we wait for U.S. Steel, ArcelorMittal USA and Nucor to make adjustments to their extras.
Galvanized Lead Times: 4-10 weeks
Galvalume Coil: SMU base price range is $38.00/cwt-$40.50/cwt ($760-$810 per ton) with an average of $39.25/cwt ($785 per ton) FOB mill, east of the Rockies. The lower end of our range remained the same compared to last week while the upper end decreased $20 per ton. Our overall average declined $10 per ton compared to one week ago. Our price momentum on Galvalume steel is pointing to Lower indicating prices are expected to decline over the next 30 days.
Galvalume .0142” AZ50, Grade 80 Benchmark: SMU price range is $1,051-$1,101 per net ton with an average of $1,076 per ton FOB mill, east of the Rockies.
Galvalume Lead Times: 5-7 weeks
Plate: SMU price range is $640-$720 per ton ($32.00/cwt-$36.00/cwt) with an average of $680 per ton ($34.00/cwt) FOB delivered. The lower end of our range decreased $30 per ton compared to one week ago while the upper end remained the same. Our overall average is down $15 per ton over the past week. Our price momentum on plate steel is pointing to Lower indicating prices are expected to decline over the next 30 days.
Plate Lead Times: 3-5 weeks
SMU Note: Below is a graphic showing our hot rolled, cold rolled, galvanized, and Galvalume price history. We are in the process of adding prices to this graph. To use the graph’s interactive capabilities, you must view it on our website here. If you need help navigating the website or need to know your login information, contact us at info@SteelMarketUpdate.com or by calling 800-432-3475.
John Packard
Read more from John PackardLatest in Steel Products Prices North America
Nucor holds HR price steady this week
Nucor is holding its hot-rolled (HR) coil consumer spot price (CSP) flat this week.
SMU price ranges: Sheet, plate largely unchanged
Sheet prices varied this week. While hot-rolled (HR) coil pricing was largely flat, cold-rolled (CR) coil and tandem product pricing eased slightly reflecting the momentum shift seen last week for HR coil. SMU’s average HR coil price was flat from last week at $835 per short ton (st) – potentially emphasizing the tension between competing […]
Nucor posts $830/ton spot HR price for week of April 8
Nucor said its spot hot-rolled (HR) coil price this week will be $830 per short ton (st).
US HR prices rebound, no longer near parity with imports
US hot-rolled coil and offshore hot band moved further away from parity this week as stateside prices have begun to move higher in response to mill increases.
Galvanized buyers report solid demand, balanced inventories
Galvanized buyers reported solid demand and balanced inventories this week and were anticipating the sheet price increase announced by Cleveland-Cliffs on Wednesday.