Steel Products Prices North America

Weekly Raw Steel Production Down Slightly
Written by Brett Linton
June 30, 2014
For the week ending June 28, 2014, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,863,000 net tons (NT) of raw steel, a 0.9 percent decrease over the previous week but a 2.1 percent increase over the same week one year ago. The estimated capacity utilization rate is 77.5 percent, down from 78.2 percent last week but up from 76.1 percent last year.
Estimated total raw steel produced for 2014 YTD is reported to be 46,978,000 tons, down <0.1 percent from the 46,987,000 tons produced through the same period in 2013. The average capacity utilization rate for 2014 YTD is estimated to be 76.5 percent, down from 76.7 percent for 2013 YTD. Note that there has been a change in production capability for 2014- comparisons between 2013 and 2014 capacity utilization rates are against different production levels, so the total tonnage figures are best suited for yearly comparisons.
Week-over-week changes per district are as follows: North East at 237,000 tons, up 11,000 tons. Great Lakes at 652,000 tons, down 13,000 tons. Midwest at 240,000 tons, down 3,000 tons. South at 651,000 tons, down 6,000 tons. West at 83,000 tons, down 6,000 tons. Total production was 1,863,000 tons, down 17,000 tons.
SMU Note: You can view the interactive graphic below when you are logged into the website and reading the newsletter online. If you have not logged into the website in the past and need a new user name and password we can do that for you out of our office. Contact us at: info@SteelMarketUpdate.com or by calling 800-432-3475. If you need help navigating the website we would also be very happy to assist you.
{amchart id=”84″ Weekly Raw Steel Production from AISI}

Brett Linton
Read more from Brett LintonLatest in Steel Products Prices North America

SMU Price Ranges: Sheet floor holds as market debates upside
Our average HR coil price increased $5/short ton from last week, marking a second consecutive week of modest gains. Market participants generally attributed the increase to...

Thin demand keeps plate prices hovering at lowest levels since February
Participants in the domestic plate market say spot prices appear to have hit the floor, and they continue to linger there. They say demand for steel remains thin, with plate products no exception.

SMU Price Ranges: HR crawls back to $800/ton
SMU’s HR price stands at $800/st on average, up $5/st from last week. The modest gain came as the low end of our range firmed, and despite the high end of our range declining slightly.

SMU successfully completes IOSCO review
SMU has successfully completed an external review of all our prices. The review has concluded that they algin with principles set by the International Organization of Securities Commissions (IOSCO).

Domestic plate prices could heat up despite so-so demand, market sources say
Some sources also speculated that plate could see further price increases thanks to modest but steady demand, lower imports, mill maintenance outages, and end markets less immediately affected by tariff-related disruptions.