Prices
Weekly Raw Steel Production Dips After Last Week's High
Written by Brett Linton
March 21, 2017
For the week ending March 18, 2017, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,747,000 net tons of raw steel, a 2.5 percent decrease over the previous week but a 3.7 percent increase over the revised rate from the same week one year ago. The estimated capacity utilization rate for steel production is 73.7 percent, down from 75.6 percent last week but up from 72.1 percent this time last year.
Estimated total raw steel produced for 2017 YTD is reported to be 19,134,000 tons, up 4.6 percent from the 18,287,000 tons produced during the same period in 2016. The average capacity utilization rate for 2017 YTD is estimated to be 73.4 percent, up from 71.3 for 2016 YTD.
Week-over-week changes per district are as follows: Northeast at 216,000 tons, up 6,000 tons. Great Lakes at 675,000 tons, down 19,000 tons. Midwest at 166,000 tons, down 2,000 tons. South at 616,000 tons, down 25,000 tons. West at 74,000 tons, down 4,000 tons. Total production was 1,747,000 tons, down 44,000 tons.
About Weekly Raw Steel Production Data
The weekly raw steel production tonnage provided by the AISI is estimated. The figures are compiled from weekly production tonnage provided by 50 percent of the domestic producers combined with monthly production data for the remainder. Therefore, this report should be used primarily to assess production trends. The monthly AISI production report provides a more detailed summary of steel production based on data supplied by companies representing over 75 percent of U.S. production capacity.
SMU Note: Below is a graphic showing the weekly raw steel production history. To use the graphs interactive capabilities, you must view it on our website. You can do this by clicking here. If you need help navigating the website or need to know your login information, contact us at info@SteelMarketUpdate.com or by calling 800-432-3475.
Brett Linton
Read more from Brett LintonLatest in Prices
SMU Survey: Mills less negotiable on spot prices
Most steel buyers responding to our market survey this week reported that domestic mills are considerably less willing to talk price on sheet and plate products than they were in recent weeks.
Price gap between US HRC, most imports narrows slightly
In dollar-per-ton terms, US product is on average $141/st less than landed import prices (inclusive of the 50% tariff). That’s down from $148/st last week.
SMU price ranges: Sheet ticks higher, plate stable
Sheet steel indices increased across the board this week, while plate prices held steady. All five of SMU’s price indices are higher than they were two weeks ago, and all but one are above levels recorded four weeks ago.
Nucor lifts HR spot price by $10/ton
Nucor has raised its weekly spot list price on hot-rolled coil by $10 per short ton (st) after keeping it unchanged since Aug. 25.
Atlas Tube up $50/ton following NLMK USA sheet price hike
Atlas Tube, in a leading move, said it aims to increase prices for mechanical tubing, hollow structural sections (HSS), and piling products by at least $50 per short ton (st).