Steel Products
Registration Open for Memphis Steel 101 Workshop
Written by John Packard
March 19, 2018
Registration is now available on our website for the next Steel 101 workshop in Memphis, Tenn.
On June 5 & 6, 2018, Steel Market Update will host our Steel 101: Introduction to Steel Making & Market Fundamentals workshop. The workshop will be held at the Westin on Beale Street in downtown Memphis. From there we will travel by bus to the Nucor Hickman and Nucor-Yamato steel plants.
Our workshop is unique in that we conduct a half-day of training about the steel making and rolling process for both flat and long products. This workshop will be a good one for companies that buy both as we will tour a flat rolled mill (Hickman) and a beam mill (Nucor-Yamato). To make it even more interesting, we will also tour the Castrip mill located at Nucor-Yamato. The Castrip mill produces hot bands through a unique process, which can only be seen at Nucor-Yamato or the Nucor Crawfordsville facilities in the United States.
Information about our agenda, instructors, hotel and costs associated with this workshop can be found on our website: www.SteelMarketUpdate.com/events/steel101 or you are welcome to reach out to us at info@SteelMarketUpdate.com or by phone at 800-432-3475.
As with any Steel 101 workshop, attendees receive a 100+ page workbook and a three-month subscription to the Premium version of the SMU newsletter. Nucor and SMU will host a networking/cocktail/dinner party on Beale Street on the evening of June 5.
“The Steel 101 workshop is a must for anyone beginning their journey in the metals industry. Getting to work hand in hand with some of the industry’s most experienced professionals has helped launch me forward in my new career. This industry is complicated, and the workshop cleared up so many questions I had. Learning all this valuable information and then getting to see it in action on the mill tour was a priceless experience. I strongly encourage anyone who is new to the metals industry to sign up.” Victoria Letnich, Outside Sales, Olympic Steel
John Packard
Read more from John PackardLatest in Steel Products
CRU: EC to toughen steel safeguards
The European Commission proposes cutting its steel import quota by almost half, with volumes exceeding the limit facing 50% duties. The region’s steel industry welcomes the move, while other steel-producing nations fear the consequences. CRU published an insight before this announcement, noting that more restrictive trade policy could significantly raise the cost of marginal supply […]
US and Canadian rig counts stabilize
US counts continue to hover just above historic lows, while Canadian figures remain comparatively healthy.
Plate market sources critique mill hikes amid current market conditions
Following spot market plate price increase notices issued by domestic mills this past week, participants are contemplating the rationale behind the increases and whether they will stick. Some sources anticipate that current market conditions will shift in November and believe the increases may set a new "pricing floor."
Oregon Steel Mills lifts plate prices by $60/ton
Oregon Steel Mills has joined other producers in announcing a price increase of at least $60 per short ton on steel plate.
CRU: Construction of pilot plant for green steel process starts
Voestalpine and partners have begun building an industrial-scale Hy4Smelt demonstration plant in Linz, Austria, which they hope will become key in the decarbonization of steel.