Steel Mills

Ternium Mulling New EAF, Cold Mill and Coating Ops in North America: Sources
Written by Michael Cowden
November 9, 2021
Ternium is considering adding a new electric arc furnace to its operations in North America as well as downstream cold rolling and coating capability.
That’s according to sources familiar with the matter and as indiciated in recent public comments from company executives.
The most likely candidate for any new EAF would be Pesquería, Mexico – outside of Monterrey – where the Latin American steelmaker has installed a new hot strip mill.
But significant investments could be made anywhere in a corridor between roughly Monterrey and Corpus Christi, Texas – on the U.S. side of the border. Key considerations would be affordable energy, deep water port access, and multi-modal freight capabilities.
The region is already popular with steelmakers. Two examples: Steel Dynamics Inc.’s new mill in Sinton, Texas, and Voestalpine’s direct-reduced iron plant in Portland, Texas.
Melting capacity in either country would meet regional content and melted-and-poured requirements that are part of the U.S.-Mexico-Canada Agreement (USMCA).
USMCA requires that 70% of a vehicle’s steel and aluminum be melted and poured in North America – which means steel made from re-rolling slabs from outside the region might not qualify for certain work.
Ternium did not respond to a request for comment for this article. But company CEO Maximo Vedoya touched on potential expansions during a third-quarter earnings conference call with analysts earlier this month.
“We are going to be USMCA compliant in six years. So, we are going to be required to expand our upstream capacity, and we are analyzing today how and where,” he said.
The company is also looking to expand downstream by adding cold-rolling and coating capacity.
The new hot strip mill in Pesquería, which made its first coil in May, “opens up … a lot of opportunities,” Vedoya said.
“Like an additional picking line, a cold rolling mill, and galvanized capacity – all are those things that we are analyzing in Mexico,” he said.
And Vedoya said investments were being considered in the U.S. as well.
“There are also other things that are in the process, where we should support the growth we have in the metal building segment platform in the south of the U.S.,” Vedoya said. “And so we should increase our pre-painting capacity we have there.”
Ternium’s primary operations are in Latin America. But it also operates a mill in Shreveport, La. – Ternium USA – that specializes in coated products, such as galvanized and Galvalume, heavily used in metal building construction.
Ternium Mexico Executive President César Jiménez said at SMU’s Steel Summit conference in August that Ternium was considering expansions in both the U.S. and Mexico.
By Michael Cowden, Michael@SteelMarketUpdate.com

Michael Cowden
Read more from Michael CowdenLatest in Steel Mills

Nucor reports improved earnings, sales, and operating rates
Nucor reported a sharp sequential rebound in the second quarter, buoyed by improved pricing and strong shipments. But the steelmaker is bracing for a modest slowdown in the months ahead.

Cliffs confirms Cleveland furnace restart, Dearborn furnace idling
Cleveland-Cliffs is idling blast furnace, BOF shop, and continuous caster functions at its Dearborn plant, but downstream operations will remain unaffected, the company confirmed. Cliffs said its pickling line tandeom cold mill (PLTCM) and its extra wide automotive-grade galvanizing line for exposed parts will continue operations at the Dearborn, Michigan-based facility.

Nucor spot HR list price unchanged at $900/ton
Nucor maintained its weekly list price for hot-rolled (HR) coil flat this week, following a price cut the previous week.

Despite trade chaos, Barry Schneider upbeat on SDI, steel
With 30 years of experience at Steel Dynamics, Barry Schneider reflects on the company and the state of the steel industry.

Algoma Steel seeks CAD$500M in operational support
Algoma Steel applied to Canada’s federal Large Enterprise Tariff Loan (LETL) program for $500 million to support its long-term operations.