Steel Products Prices North America
Slight Decrease in Weekly Raw Steel Production
Written by Brett Linton
June 27, 2017
Domestic raw steel production declined slightly last week, according to the American Iron and Steel Institute in Washington.
In the week ending June 24, raw steel production totaled 1,729,000 net tons, down 0.6 percent from the previous week and down 1.5 percent from the same week last year.
Adjusted year-to-date production through totaled 43,353,000 net tons, up 2.3 percent from the same period in 2016.
The mill capacity utilization rate now averages 74.4 percent for the year, down from 74.6 percent last week but up from 72.6 this time last year.
Production by district for the June 17-24 week and the week-over-week changes are as follows: Northeast up 4,000 tons to 210,000; Great Lakes down 18,000 tons to 642,000; Midwest up 6,000 tons to 167,000; South down 5,000 tons to 633,000; and West up 3,000 tons to 77,000.
Total capacity for second-quarter 2017 is approximately 30.3 million tons, compared to 30.4 million tons for the same period last year and 30.0 million tons for first-quarter 2017.
The Raw Steel production tonnage provided in this report is estimated. The figures are compiled from weekly production tonnage provided from 50 percent of the domestic producers combined with monthly production data for the remainder. Therefore, this report should be used primarily to assess production trends. The AISI monthly production report, available by subscription, provides a more detailed summary of steel production based on data supplied by companies representing 75 percent of U.S. production capacity.
Below is a graphic showing the weekly raw steel production history. To use the graphs interactive capabilities, you must view it on our website. You can do this by clicking here. If you need help navigating the website or need to know your login information, contact us at info@SteelMarketUpdate.com or by calling 800-432-3475.
Brett Linton
Read more from Brett LintonLatest in Steel Products Prices North America
SMU price ranges: Sheet, plate largely unchanged
Sheet prices varied this week. While hot-rolled (HR) coil pricing was largely flat, cold-rolled (CR) coil and tandem product pricing eased slightly reflecting the momentum shift seen last week for HR coil. SMU’s average HR coil price was flat from last week at $835 per short ton (st) – potentially emphasizing the tension between competing […]
Nucor posts $830/ton spot HR price for week of April 8
Nucor said its spot hot-rolled (HR) coil price this week will be $830 per short ton (st).
US HR prices rebound, no longer near parity with imports
US hot-rolled coil and offshore hot band moved further away from parity this week as stateside prices have begun to move higher in response to mill increases.
Galvanized buyers report solid demand, balanced inventories
Galvanized buyers reported solid demand and balanced inventories this week and were anticipating the sheet price increase announced by Cleveland-Cliffs on Wednesday.
HRC vs. CRC price spread jumps in second week of new year
The spread between cold-rolled coil (CRC) and hot-rolled coil (HRC) prices jumped during the week of Jan. 8 as cold rolled tags continued to rise while hot rolled tags held steady.