Steel Products
Construction Jobs Increase in 26 States in September
Written by Sandy Williams
October 20, 2017
Construction job creation in September was muted due to the recent hurricanes, said the Associated General Contractors of America in an analysis released by the Labor Department on Friday. Twenty-six states added construction jobs between August and September, while 35 states and the District of Columbia added construction jobs between September 2016 and September 2017. Association officials noted that construction employment in many parts of the country would have been higher if more qualified workers were available.
“Contractors in most states still report they are busy and expect to stay that way for the foreseeable future,” said Ken Simonson, chief economist for the association. “These reports suggest employment would be rising in more states if contractors could find enough qualified workers.”
California added the most construction jobs (44,600 jobs, 5.7 percent) during the past year. Other states adding a high number of new construction jobs for the past 12 months include Louisiana (14,700 jobs, 10.6 percent); Texas (14,300 jobs, 2.0 percent); Oregon (13,500 jobs, 14.9 percent) and Florida (12,700 jobs, 2.6 percent). Oregon added the highest percentage of new construction jobs during the past year, followed by Rhode Island (13.7 percent, 2,500 jobs); Nevada (12.6 percent, 9,700 jobs); Louisiana and New Hampshire (10.2 percent, 2,600 jobs).
{loadposition reserved_message}
Fourteen states shed construction jobs between September 2016 and September 2017, while construction employment was unchanged in Idaho. Iowa lost the highest number of construction jobs (-6,600 jobs, -8.1 percent), followed by Missouri (-6,400 jobs, -5.3 percent), Georgia (-6,200 jobs, -3.4 percent) and Illinois (-5,800 jobs, -2.7 percent). Iowa lost the highest percentage for the year, followed by Missouri, Connecticut (-4.3 percent, -2,500 jobs), South Dakota (-3.7 percent, 900 jobs), Georgia and Illinois.
Simonson noted that Hurricane Harvey, which struck Texas and other Gulf Coast states in late August, had probably contributed to a large rebound in construction employment in Texas from August to September. Hurricane Irma hit Florida in mid-September and led to an extreme but probably temporary drop in construction employment there.
Among the 26 states that added construction jobs between August and September, Texas added more than any other state (4,100 jobs, 0.6 percent), followed by Pennsylvania (4,000 jobs, 1.7 percent), Oregon (2,900 jobs, 2.9 percent), Massachusetts (2,700 jobs, 1.8 percent) and California (2,500 jobs, 0.3 percent). Nebraska added the highest percentage of construction jobs for the month (3.6 percent, 2,700 jobs), followed by Oregon, Mississippi (2.8 percent, 1,200 jobs) and Vermont (2.7 percent, 400 jobs).
Twenty-two states lost construction jobs between August and September, while construction employment was unchanged in Indiana, Tennessee and D.C. Florida lost the most construction jobs for the month (-21,000 jobs, -4.1 percent), followed by Georgia (-3,600 jobs, -2.0 percent), New York (-2,900 jobs, -0.8 percent) and Missouri (-2,500 jobs, -2.1 percent). Florida lost the highest percentage of construction jobs, followed by Idaho (-2.9 percent, -1,300 jobs), Connecticut (-2.6 percent, -1,500 jobs), Missouri and Georgia.
Association executives urged elected and appointed officials to take additional steps to encourage young adults to pursue high-paying careers in construction. “Too many students are graduating with skills employers don’t need, while high-paying positions in fields like construction go unfilled as firms search for qualified workers,” said Stephen E. Sandherr, chief executive officer for the association.
Sandy Williams
Read more from Sandy WilliamsLatest in Steel Products
Steel imports stabilized in March
Steel imports held steady in March, up just 1% from February according to preliminary Census data released earlier this week.
Cliffs working on a transforming solution for Weirton mill
Cleveland-Cliffs is working on a solution for its recently idled mill in Weirton, W.Va., that will address pent-up demand for transformers, increase the need for its electrical steel, and get its workforce back to work.
Zekelman to invest up to $120M at Atlas Tube subsidiary
Zekelman Industries will invest up to $120 million to expand the manufacturing capabilities and product offerings of its Atlas Tube subsidiary in Mississippi County, Ark.
Leibowitz: Unpacking Biden’s big announcements on steel and trade
Last week gave us a glimpse into the effect of the 2024 election campaign on trade policy. In a major announcement, the Biden administration pressed the US Trade Representative (USTR) to triple certain Section 301 tariffs on steel and aluminum. It’s a lot to unpack. You can find the full text of the announcement here. […]
ArcelorMittal to produce electrical steel with IRA funding
After receiving a hefty federal tax credit, ArcelorMittal plans to produce non-grain-oriented electrical steel (NOES) in Alabama. ArcelorMittal Calvert LLC received a tax credit of $280.5 million for the project, according to a Department of Energy (DOE) announcement on Friday. The Qualifying Advanced Energy Project Credit (48C) tax credit is meant to accelerate clean energy […]