Steel Mills
Cliffs to Restart Cleveland BF, Middletown BF Down for Repairs
Written by Michael Cowden
January 22, 2021
Cleveland-Cliffs plans to restart the No. 6 blast furnace at its steel mill in Cleveland, Ohio, a company spokeswoman said.
Output from the No. 6 furnace will help to replace lost production from the steelmaker taking down for maintenance the No. 3 furnace at its Middletown, Ohio, mill, she said.
“We are not planning to increase steel production as we have enough capacity installed to best serve our customers. Cleveland-Cliffs is about value over volume,” the spokeswoman said.
The Cleveland mill has two blast furnaces: No. 5 and No. 6. The No. 6 blast furnace has been on hot idle since April 2020, she said.
Cliffs does not plan to increase production, but instead to rotate furnaces on and off as necessary to perform maintenance while keeping output steady, the spokeswoman said.
Some steel consumers had hopes that Cliffs would restart additional capacity in order to relieve a spot market supply squeeze that has sent hot-rolled coil prices to their highest point ever.
The No. 6 blast furnace at Cleveland has annual capacity of 1.37 million tons per year, according to the Association for Iron & Steel Technology’s (AISTech’s) 2020 directory of iron and steel plants.
The No. 3 furnace at Middletown–the only one at that mill–has annual capacity of 2.09 million tons, per AISTech.
All told, Cliffs has 10 blast furnaces, the spokeswoman said.
Previously known primarily as a mining company, Cliffs has become the largest flat-rolled steelmaker in the U.S. following its acquisition of AK Steel and the integrated steelmaking assets of ArcelorMittal USA.
By Michael Cowden, michael@steelmarketupdate.com
John Packard contributed to this article.
Michael Cowden
Read more from Michael CowdenLatest in Steel Mills
Algoma to conclude planned plate mill outage at month’s end
Algoma Steel Inc. expects to wrap up a previously announced outage on its plate mill by the end of this month, a company spokeswoman said. The outage is part of the Canadian flat-rolled steelmaker’s $130 million CAD ($95 million USD) modernization project. It began in mid-April.
SDI execs detail April outage at Sinton, address ‘robust’ HR-CR spread
Steel Dynamics Inc. (SDI) executives said the company's Sinton, Texas, sheet mill should be able to increase melt capacity after an outage earlier this month. Sinton should see "additional improvements in production" after taking "several maintenance days in April," Barry Schneider, SDI president and COO, said in a Q1 earnings conference call on Wednesday.
SSAB Americas Q1 results hit by lower plate prices, demand
Lower demand and prices for steel plate impacted SSAB Americas’ results in the first quarter, Swedish parent company SSAB said in its Q1'24 interim report.
Cliffs working on a transforming solution for Weirton mill
Cleveland-Cliffs is working on a solution for its recently idled mill in Weirton, W.Va., that will address pent-up demand for transformers, increase the need for its electrical steel, and get its workforce back to work.
Cliffs being selective with auto clients on strength in sector
With strength in the sector and customers needing the product it produces, Cleveland-Cliffs’ chief executive says the company will be more selective with the automotive customers it chooses to serve.