Steel Mills
SDI Sinton Hot End Delayed to Q4 on Severe Weather: Millett
Written by Michael Cowden
July 8, 2021
Steel Dynamics Inc. (SDI) has delayed the start-up of the hot end of its new steel mill in Sinton, Texas, to the fourth quarter, the company’s top executive said.
The move was necessary because of severe rain over the last 4-6 weeks, something that was amplified by recent flooding in the region, SDI Chairman, President and CEO Mark Millett told Steel Market Update.
“Those rain delays have pushed us back 3-4 weeks. So instead of September-October, it’s October-November. It’s definitely going to be a Q4 event,” Millett said.
SDI has previously said that the mill would start up in late summer.
There had been chatter that the delays could set the project back until 2022. Millett said that’s untrue: “Any rumor that it’s pushed into next year is absolutely inaccurate.”
While the hot strip mill and melt shop might be delayed until Q4, SDI remains on track to start up its coating lines on schedule. “We’re on schedule to paint this month, and the coating line (will start) next month – so both those remain unchanged,” he said.
The paint line is expected to have annual coating capacity of 250,000 tons. And the galvanizing line is expected to have capacity of 550,000 tons per year, SDI has said.
SDI has previously said that it plans to start up Sinton’s coating lines before it begins melting and hot-rolling operations at the mill, which is located approximately 25 miles from Corpus Christi.
The start-up of the $1.9-billion steel mill, construction of which started in early 2020, comes amid the hottest steel market in decades.
Case in point: Galvanized base prices stand at $1,995 per ton ($99.75 per cwt), up 84% from $1,085 per ton at the beginning of the year and more than triple $650 per ton a year ago, according to SMU’s interactive price tool.
By Michael Cowden, Michael@SteelMarketUpdate.com
Michael Cowden
Read more from Michael CowdenLatest in Steel Mills
Nucor breaks ground on new Berkeley galv line
Nucor broke ground on a new galvanizing line at its Nucor Steel Berkeley sheet mill in Huger, S.C., on Thursday, May 2.
USS, Nippon merger delayed by DOJ antitrust review
The sale of U.S. Steel Corp. to Nippon Steel Corp. has been delayed by the US Department of Justice’s antitrust investigation. The Justice Department, which is conducting an antitrust review of the merger, has requested additional information from both USS and NSC. The companies originally anticipated closing the sale in the second or third quarter […]
U.S. Steel Q1 earnings slip, BRS expansions proceed
U.S. Steel posted slightly lower Q1’24 earnings as stronger earnings from its sheet mills were partially offset by a weaker performance from it tubular division. All told, the Pittsburgh-based steelmaker reported Q1’24 earnings of $171 million. That's down 14.1% from $199 million in Q1’23 on sales that fell 6.9% to $4.16 billion in the same comparison.
ArcelorMittal says Calvert CR outage over, floats buying Nippon’s stake in JV
ArcelorMittal posted a narrower Q1’24 profit compared to Q1’23 but remained optimistic about steel's long-term demand prospects.
SMU Community Chat: Hybar’s ambitious plans as newest player in rebar
Hybar has big plans for entering the American steel market. Although it is the newest player in the US rebar market, the startup is led by an experienced, nimble, and ambitious team, and backed by investors with deep pockets. Industry titan and Hybar CEO David Stickler joined SMU Managing Editor Michael Cowden on Wednesday’s Community Chat to update the SMU community on the company’s first mill, and its grand plans for the future.