Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: The Section 232 tariffs on steel and aluminum came under new scrutiny last week. A Supreme Court decision and an announcement by U.S. Steel were key developments. First, U.S. Steel announced the idling of two blast furnaces, due […]
U.S. steel imports appear to have declined in May from the big jump in April, based on a preliminary total of May license data from the Commerce Department. Semi-finished imports dropped sharply, from 1.3 million tons in April to 697,000 tons in May as domestic steelmakers worked down their supplies of foreign slabs. Imports totaling […]
Steel Market Update data supports the widespread view that steel demand is unusually sluggish for this time of year. Nine out of 10 steel buyers responding to Steel Market Update’s market trends questionnaire this past week characterized demand as flat or declining. Only a small single-digit percentage see improving demand. About 35 percent of the […]
By CRU Principal Economist Lisa Morrison April reports related to manufacturing indicate a potential softening in the sector going forward. Since total IP growth for Q1 was revised down to register a decline of 0.5 percent q/q, we have reduced our forecast for 2019 IP growth to 2.0 percent from 2.7 percent previously. The ISM […]
By CRU Principal Economist Lisa Morrison During the last two years, we have become somewhat accustomed to waking up to some fresh, new policy idea of the Trump administration, disseminated via presidential tweet. However, the levying of tariffs on Mexican imports, as punishment for Mexico allowing Central American migrants to traverse their country in order […]
The Coalition of American Metal Manufacturers and Users issued the following statement on the one-year anniversary (June 1) of full implementation of the Section 232 tariffs on steel and aluminum imports: The Coalition of American Metal Manufacturers and Users (CAMMU) is encouraged by the termination of Section 232 steel and aluminum tariffs on Mexico and […]
Manufacturing in May grew at its slowest pace in two and a half years amid trade tensions and slower demand, reports the Institute for Supply Management. The PMI for the Manufacturing ISM Report on Business decreased 0.7 percentage points from April to a reading of 52.1 percent. The index for new orders gained one percentage […]
May turned out to be a good month for several automakers. Fiat Chrysler, Toyota and Nissan all reported year-over-year gains. Fiat Chrysler posted a 2 percent gain in May, its first monthly increase since January, while Toyota jumped 3.2 percent and Nissan 0.1 percent. Automotive News estimates that General Motors sales increased 1.2 percent in […]
I am in Washington, D.C., attending the joint SMA/AISI annual meeting. I had the unique opportunity to sit down with Phil Bell, President of the Steel Manufacturers Association, and the SMA board to discuss my viewpoints regarding various issues affecting the electric arc furnace manufacturers. The SMA got to see a few of the proprietary […]
Promises of steel tariff relief were short-lived for Mexico as President Trump’s latest tariff move adds new penalties and dashes hopes for quick ratification of the USMCA. Trump announced on Thursday that 5 percent tariffs will be imposed June 10 on all Mexican goods, including steel, until such time that Mexico stops the influx of […]
NLMK Group has backed off from plans to invest in its U.S. division due to the steel duties that were imposed in 2018. The Department of Commerce has denied the Group’s request for exemption from the 25 percent Section 232 tariffs so that it can supply its facilities with steel slab. “Earlier we planned to […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: President Trump announced his intention to impose new tariffs on imports from Mexico on Thursday afternoon. Beginning June 10, 5 percent tariffs will be imposed on all imports of goods from Mexico. On the first of July, the […]
Chinese steel trade data was recently released for the month of April 2019, providing updated data on iron ore imports, scrap imports, and flat rolled imports and exports. Chinese imports of iron ore in April totaled 80,770,000 metric tons, a decrease of 6.5 percent from the previous month, and a decrease of 2.6 percent from […]
U.S. steel imports saw a big jump in April, based on preliminary license data from the Commerce Department. Total imports appear to have topped 3.3 million tons, largely due to nearly 1.3 million tons of semi-finished imports. The figures suggest that domestic steelmakers tripled their purchases of foreign slabs in April compared with March. Final […]
Editor’s note: John Packard is on vacation. A year into President Trump’s policy of imposing extra import duties to offset a U.S. trade imbalance, public opinion on the impact of tariffs remains divided, with few seeing an economic benefit, according to the latest Monmouth University Poll conducted last week. A majority of those responding expect […]
Editor’s note: John Packard is on vacation. It appears many steel buyers are holding off on purchases while they wait to see if imports resume from Canada, Mexico and Turkey now that President Trump has reversed himself on the Section 232 tariffs. “Lead times are stagnating/shortening and the mills are in full negotiation mode,” said […]
Now that the U.S. borders are open to tariff-free steel from Canada and Mexico, and lower-tariff steel from Turkey, can the market expect a flood of imports in the coming weeks and months? And what will that mean for steel prices? Last week, the Trump administration removed the 25 percent tariff on steel imports from […]
Altos Hornos de Mexico (AHMSA) plans to increased steel production by 30 percent now that U.S. tariffs have been eliminated. The year-long Section 232 measures caused a 25 percent drop in AHMSA’s steel production and $300 million in lost revenue, said AHMSA President Alonso Ancira Elizondo. As orders from the U.S. fell due to the […]
U.S. gross domestic product grew in every region of the country in all four quarters of 2018, according to Bureau of Economic Analysis data. The BEA introduced a new data set for GDP by state and region in 2014 and backdated it to Q1 2005. This week, the data was updated through Q4 2018. Even […]
In this report, we examine the change in currency values of the 16 pre-eminent global steel and iron ore trading nations. The currencies of these 16 don’t necessarily follow the broad index value of the U.S. dollar. In fact, at any given time, some are always moving in the opposite direction. The latest value of […]
Steel prices declined yet again this week with some hot rolled offers falling below the $600 per ton level, according to Steel Market Update data. The market will be watching intently in the coming weeks to see if imports from Canada and Mexico add to the downward price pressure, now that President Trump has removed […]
Major steel producers in the U.S. had hoped the president wouldn’t blink on the Section 232 tariffs on Canada and Mexico—but he did—in an apparent effort to clear the way for passage of the new North American free trade agreement. Now the mills are supporting the administration’s demand that steel trade in North America be […]
By CRU Principal Analyst Josh Spoores and Analyst Ryan McKinley Steel imports to the U.S. from Canada and Mexico prior to the S232 tariffs were near 12 Mt on an annualized basis. Data from this past March and April show arrivals closer to 7.5 Mt annually. With the end of the S232 on the U.S.’s […]
U.S. steel imports are trending a bit lower in May after a significant jump in April, according to Steel Market Update’s analysis of Commerce Department license data. With about 10 days left in the month, it appears May imports will approach 2.7 million tons, down from approximately 2.9 million tons in April. May imports are […]
Like everyone else in the steel industry, members of the Heating, Air-conditioning and Refrigeration Distributors International (HARDI) are wondering what will happen to supply and prices now that the Trump administration has lifted the Section 232 tariffs on steel imports from Canada and Mexico and cut in half the tariffs on steel imports from Turkey. […]
Rail transport is a critical link in getting steel to market. With domestic mills cranking out steel at more than 80 percent of their capacity, are the railroads struggling to keep up? “People assume our business should be booming, but it’s not as straightforward as one would think,” said JR (Jim) Schaaf, Group Vice President […]
Premium subscribers to Steel Market Update have reports available on our website that break out the import tonnage into district of entry and source nation for six sheet and plate product categories. This report takes the total national tonnage of hot rolled and breaks it down into product detail. Using U.S. International Trade Commission (USITC) […]
Demand for long products and tubular goods have shown strong growth, but sheet products are declining. This analysis by SMU staff is based on data from the American Iron and Steel Institute (AISI) and the U.S. Department of Commerce (DoC). The analysis summarizes total steel supply by product from 2003 through March 2019 and year-on-year […]
Using U.S. International Trade Commission (USITC) data, SMU has taken the import tonnage of cold rolled sheet and broken it down into coil and leveled, then it breaks out four thickness ranges and identifies how much was full hard, annealed and high strength. Through March 2019, of the total cold rolled sheet and strip imports […]
On Friday, May 17, President Trump concurred with findings by the Commerce Department that imports of automotive vehicles and parts threatened to impair national security. As a result, the President directed the U.S. Trade Representative to pursue negotiation of agreements with the EU and Japan, and any other country the Trade Representative deems appropriate, to […]