On the heels of Wednesday’s $50 per ton increase on carbon plate prices, Nucor today announced an additional $30 per ton increase on hot rolled, cold rolled and galvanized steel products. In a letter to customers, Nucor’s Sheet Mill Group said the price increases are effective immediately on new and unconfirmed orders. SSAB Americas and […]
The Department of Commerce issued an affirmative final determination in the antidumping investigation of carbon and alloy steel wire rod imports from Belarus, the Russian Federation and the United Arab Emirates. The following dumping margins were assigned: Belarus: 280.02 percent Russia: 756.93 percent for Abinsk Electric Steel Works Ltd. and JSC NLMK-Ural, and 436.8 percent […]
The Commerce Department’s Vietnam circumvention ruling on Tuesday represents a departure in the U.S. government’s interpretation of what constitutes adding “minor or insignificant” value to a product. This is a key issue in determining whether importation of a product from a country not directly subject to a trade remedy amounts to a “circumvention” of existing […]
In separate notices to customers today, SSAB Americas, Nucor and ArcelorMittal USA announced their intentions to raise steel plate transaction prices by $50 per ton. This new announcement means the domestic plate producers have raised prices by $130 per ton ($6.50/cwt) over the past 30 days. SSAB Americas said it is raising transaction prices by […]
With the exception of U.S. Steel, all of the domestic steel mills have announced new coating extras for galvanized steel. The coating extras, which were last changed in April/May 2017 (announcements went out in February/March 2017), are rising due to the higher costs associated with zinc, which is the main ingredient used when making galvanized […]
Dan DiMicco, former CEO of Nucor Corp., has been appointed to a four-year term as a member of President Trump’s Advisory Committee for Trade Policy and Negotiations, the White House announced in a Dec. 4 release. DiMicco, who retired from Nucor, is a former trade advisor to the Trump campaign and serves as chairman of […]
Dan DiMicco, former CEO of Nucor Corp., has been appointed to a four-year term as a member of President Trump’s Advisory Committee for Trade Policy and Negotiations, the White House announced in a Dec. 4 release. DiMicco, who retired from Nucor, is a former trade advisor to the Trump campaign and serves as chairman of […]
Galvanized steel prices are on the way up for customers of Steel Dynamics, which was the latest mill to announce an increase in its coating extras due to the high price of zinc, which traded at nearly $1.43 per pound yesterday. SDI’s new extras schedule is effective on orders acknowledged for delivery beginning Jan. 1. […]
In preliminary rulings today, the U.S. Department of Commerce announced that corrosion-resistant steel (CORE) and certain cold-rolled flat products imported from Vietnam, produced from substrate originating in China, are circumventing existing antidumping and countervailing duty (AD/CVD) orders. As a result, Commerce will instruct Customs and Border Protection (CBP) to begin collecting cash deposits on the […]
In preliminary rulings today, the U.S. Department of Commerce announced that corrosion-resistant steel (CORE) and certain cold-rolled flat products imported from Vietnam, produced from substrate originating in China, are circumventing existing antidumping and countervailing duty (AD/CVD) orders. As a result, Commerce will instruct Customs and Border Protection (CBP) to begin collecting cash deposits on the […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel HR futures markets have paused post Thanksgiving. While the HR spot prices have retraced $27/ST in the month of November to approximately […]
Steel Market Update canvassed a large number of flat rolled and plate steel buyers during the course of the last 24 hours. The goal was to better understand where spot prices were being offered (and by whom) and if there were any differences in momentum or the negotiation positions of the various steel mills. We […]
Steel Market Update (SMU) has been canvassing our ferrous scrap sources to find out where the industry sees prices once the negotiations begin with the domestic steel mills. All of our sources tell SMU they expect prices to be higher, somewhere in the $10 to $30 per gross ton range, compared to the November prices. […]
Flat rolled and plate steel prices are all over the place this week. We are seeing a distinct difference in pricing from those mills who still have November and December tonnage compared to those whose lead times are into January and beyond. Hot roll appears to be the strongest product with virtually all of our […]
On Wednesday, Nov. 15, 2017, Nucor Sheet Mill Group advised their customers that galvanized orders placed for the first week of January 2018 would have new zinc coating extras. The change in the extras is due to the high cost of zinc, which has been trading in the $1.45-$1.50 per pound range over the past […]
Nucor Corp. plans to invest $180 million in a full-range merchant bar quality mill at its existing bar steel mill in Bourbonnais, Ill. The MBQ mill, which will take two years to complete, will have an annual capacity of 500,000 tons. The Midwest region is one of the largest markets for MBQ products, and Nucor […]
Nucor became the first sheet mill to step out and attempt to nudge hot rolled, cold rolled and galvanized steel prices higher. On Wednesday afternoon the Nucor Sheet Group announced a new $30 per ton ($1.50/cwt) price increase to be “effective immediately.” The Nucor announcement was quickly matched by NLMK USA who put a letter […]
Over the past few days, all of the domestic plate mills have announced a $40 per ton ($2.00/cwt) price increase on plate products. We have seen announcements out of the Nucor Plate Group, ArcelorMittal USA commercial plate group, Evraz and SSAB. SSAB was the last to announce with their letter dated Nov. 16, 2017. In […]
Nucor became the first sheet mill to step out and attempt to nudge hot rolled, cold rolled and galvanized steel prices higher. This afternoon (Wednesday, Nov. 15, 2017) the Nucor Sheet Group announced a new $30 per ton ($1.50/cwt) price increase to be “effective immediately.” The Nucor price increase follows a plate and hot rolled […]
Flat rolled steel prices were mixed this past week. Benchmark hot rolled continues to be one of the better performing of the group. Our HRC average was up $5 per ton this week. Cold rolled was also up, galvanized was sideways and Galvalume dropped $30 per ton. Plate prices on a delivered basis were up […]
The expectation, even among the naysayers, is there will be a bounce in flat rolled prices once lead times reach the end of December and into the New Year. The expectation is that the domestic steel mills will raise prices in the coming days. We have heard rumors that the first mill to move may […]
Flat rolled steel prices were mixed this week. There was no clear-cut direction being set, although the expectation is for prices to rise once lead times go into January. For that matter, we did hear from some steel buyers who placed December HRC orders for $600 per ton and at the same time placed January […]
A couple of weeks ago, ArcelorMittal USA announced price increases taking flat rolled steel base prices on hot rolled to $625 per ton and $41.25/cwt base on cold rolled and galvanized. We have yet to see spot prices out of the domestic steel mills reach the prices suggested by AMUSA. The rest of the industry […]
On Monday, SSAB sent a letter to customers advising of the company’s intention to raise spot transaction prices by a minimum of $40 per ton ($2.00/cwt) effective immediately. The increase covers all “…As-Rolled Mill Plate, Cut-to-Length Plate >72”, Hot Rolled Coils >72”, as well as Normalized and Quenched & Tempered Plate.” SSAB also advised that […]
Ferrous scrap prices for the month of November began coming into focus on Friday with SMU scrap sources advising prime grades as being down $10 per gross ton compared to October levels. Obsolete and cut grades were reported as trading sideways (same prices as October). Not all regions are trading at the same pricing or […]
We have been watching the market very carefully looking for signs of a complete change in momentum, which would spur prices to move higher over time. We are finding hot rolled and cold rolled prices strengthening at the lower end of the range, and there have been some adjustments to coated products on a weekly […]
We did a quick check of lead times at a number of domestic steel mills on Friday of this past week. This is what we learned: Steel Dynamics Industries (SDI) – Butler, Ind. HR – closed for November production Pickled – closed for November production CR – closed for November production HRG – 11/20 (4 […]
In a preliminary ruling on Wednesday, the Commerce Department found that seven countries have sold carbon and alloy steel wire rod in the United States at less than fair value. Subject to antidumping duties ranging from 2 to 148 percent are imports from Italy, Korea, South Africa, Spain, Turkey, Ukraine and the United Kingdom. Wire […]
Two representatives of steel intensive regions will co-chair the Congressional Steel Caucus, Representatives Rick Crawford (R-AR) and Mike Bost (R-IL). Crawford’s 1st Congressional District in Arkansas was a farming region three decades ago when the Caucus was founded. Today, it hosts Nucor-Steel Yamato, Nucor Steel Arkansas, and Big River Steel, making it the second largest […]
Two representatives of steel intensive regions will co-chair the Congressional Steel Caucus, Representatives Rick Crawford (R-AR) and Mike Bost (R-IL). Crawford’s 1st Congressional District in Arkansas was a farming region three decades ago when the Caucus was founded. Today, it hosts Nucor-Steel Yamato, Nucor Steel Arkansas and Big River Steel, making it the second largest […]