Raw steel production by domestic steelmakers declined for the third week in a row, taking the industry’s average capability utilization rate down by another full percentage point to 77.8 percent. The last time the utilization rate was above 80 percent was the week of Aug. 24. Mill production has dipped by nearly 3 percentage points […]
Raw steel production by domestic steelmakers dipped for the second week in a row, taking the industry’s average capacity utilization rate down to 78.8 percent–the lowest level since the week of Aug. 4, 2018. Production for the week ending Sept. 7 totaled 1,835,000 net tons, down 0.8 percent from the previous week and down 1.7 […]
Raw steel production by domestic steelmakers dipped by 1.4 percent last week, taking the industry’s average capacity utilization rate down more than a percentage point to 79.5 percent–below the 80 percent mark the mills strive to maintain. Production for the week ending Aug. 31 totaled 1,850,000 net tons, also down 0.6 percent compared with the […]
Demand for long products continues to be very strong, driven by the construction industry. Demand for sheet products is declining due to the weakness in manufacturing. This analysis by Steel Market Update is based on steel mill shipment data from the American Iron and Steel Institute (AISI) and import-export data from the U.S. Department of […]
Steel mill capacity utilization climbed back over the 80 percent mark last week, increasing by 1.1 percent to register 80.6 percent, reported the American Iron and Steel Institute. Production was up by 0.9 percent compared with the same period last year. Raw steel production for the week ending Aug. 24 totaled 1,877,000 net tons. Domestic […]
Steel mill capacity utilization dipped below the 80 percent mark last week for the first time since early July, registering 79.8 percent, reported the American Iron and Steel Institute. Production was down by 0.2 percent compared with the same period last year–the first time this year that weekly production was below 2018 levels. Raw steel […]
After a month of small increases, steel mill capacity utilization dipped last week to 80.2 percent. The mills have still kept production above the benchmark 80 percent level for the past five weeks, since the week ending July 6. Raw steel production for the week ending Aug. 10 totaled 1,867,000 net tons, a decrease of […]
Total U.S. raw steel production in the month of June declined 4.1 percent to 7,984,988 net tons, reports the American Iron and Steel Institute in Washington. This is the first time monthly production levels have dipped under eight million tons since February 2019. Although down over the previous month, June production is only slightly below […]
Steel mill capacity utilization has been inching upward for the past month and registered 81.5 percent in the week ending Aug. 3 as the domestic mills benefit from higher steel prices. The last time the mills operated at this rate was mid-May. Raw steel production for the week ending Aug. 3 totaled 1,897,000 net tons, […]
Steel mill capacity utilization inched up for the third week in a row to nearly 81 percent last week as the domestic mills seek to capitalize on higher prices in the marketplace. Raw steel production for the week ending July 27 totaled 1,884,000 net tons, an increase of 0.6 percent from the previous week, as […]
Domestic steelmakers are keeping their capacity utilization above the 80 percent mark as they seek higher prices in the marketplace. The U.S. mill utilization rate averaged 80.4 percent in the week ending July 20, an increase of 0.3 percent from the previous week. Raw steel production for the week totaled 1,872,000 net tons. Production was […]
Total U.S. raw steel production in the month of May rose 2.7 percent to 8,325,489 net tons, reports the American Iron and Steel Institute in Washington. May production was at one of the higher levels in recent history, only surpassed by March 2019 and October 2018. Prior to those three months, the last time production […]
The U.S. mill capability utilization rate increased by 1.1 percent from the previous week, edging back up over 80 percent, reported the American Iron and Steel Institute. Raw steel production for the week ending July 13 totaled 1,867,000 net tons, for a mill utilization rate of 80.2 percent. Production was up by 1.6 percent compared […]
Demand for long products is very strong, driven by the construction industry. Demand for sheet products is declining. This analysis by Steel Market Update is based on steel mill shipment data from the American Iron and Steel Institute (AISI) and imports/export data from the U.S. Department of Commerce (DoC). The analysis summarizes total steel supply […]
The U.S. mill capability utilization rate saw a slight dip again last week to 79.4 percent–below the 80 percent level steelmakers had hoped to maintain. Raw steel production for the week ending July 6 totaled 1,847,000 net tons, the lowest level seen since last fall. Production was down 0.2 percent from the previous week, but […]
As many predicted, the mill capability utilization rate was bound to dip below 80 percent soon as domestic steelmakers ease back on production to trim supplies in pursuit of higher steel prices. Indeed, average utilization dipped last week for the fifth week in a row, by a full percentage point, to 79.5 percent. Raw steel […]
The market is keeping a close watch on capacity utilization by domestic steelmakers for signs the mills may be dialing back on their high production rates to better match supply with demand. While there was a small dip, mill utilization remained above the 80 percent level last week. The American Iron and Steel Institute reports […]
U.S. steel mill utilization inched up a half percent after four weeks of small declines to 81.1 percent in the week ending June 15. Raw steel production for the week totaled 1,887,000 net tons, a 4.0 percent increase from the same period last year, reported the American Iron and Steel Institute. Adjusted year-to-date production through June […]
Total U.S. raw steel production in the month of April declined 4.3 percent to 8,109,241 net tons, reports the American Iron and Steel Institute in Washington. Although down over the prior month, the April production level remains strong in comparison to recent months. Also remember that the March production level was the highest seen in […]
Steel Market Update is pleased to share this Premium content with Executive-level members. For more information on how to upgrade to a Premium-level subscription, email Info@SteelMarketUpdate.com. Demand for long products is strong, driven by construction, while demand for sheet is declining, according to this SMU analysis of the latest data from the American Iron and […]
The U.S. mill capability utilization rate declined slightly for the fourth week in a row to 80.6 percent in the week ending June 8. Raw steel production dipped by another 0.8 percent from the previous week to 1,875,000 net tons. Current mill utilization is down about 2.8 percentage points from its peak earlier this year. […]
The U.S. mill capability utilization rate saw a slight dip for the third week in a row but remained above 81 percent (81.2 percent) for the week ending June 1. Raw steel production declined by 0.1 percent from the previous week to 1,890,000 net tons. The week’s production represented a 4.5 percent increase from the […]
The U.S. mill capability utilization rate saw a slight dip for the second week in a row, to a still healthy 81.3 percent for the week ending May 25. Raw steel production declined by 0.4 percent from the previous week to 1,892,000 net tons. The week’s production represented a 4.6 percent increase from the same […]
The U.S. mill capability utilization rate dipped slightly to 81.6 percent for the week ending May 18, while raw steel production declined by 1.4 percent from the previous week to 1,900,000 net tons. The week’s production represented a 5.1 percent increase from the same period last year, reported the American Iron and Steel Institute. Adjusted year-to-date […]
Demand for long products and tubular goods have shown strong growth, but sheet products are declining. This analysis by SMU staff is based on data from the American Iron and Steel Institute (AISI) and the U.S. Department of Commerce (DoC). The analysis summarizes total steel supply by product from 2003 through March 2019 and year-on-year […]
The U.S. mill capability utilization rate bumped up a half point to 82.8 percent for the week ending May 11, while raw steel production increased by 0.6 percent from the previous week to 1,927,000 net tons. The week’s production represented a 6.6 percent increase from the same period last year, reported the American Iron and Steel […]
Total raw steel production for the month of March rose to 8,472,311 net tons, reports the American Iron and Steel Institute in Washington. This is the highest monthly production level seen in four and a half years, going back to August 2014 when it was 8,546,303 tons. Broken down by production method, 5,833,229 tons (68.9 […]
U.S. raw steel production for the week ending May 4 increased by 1.1 percent from the previous week to 1,915,000 net tons, while the mill capability utilization rate bumped up almost a point to 82.3 percent. The week’s production represented a 6.6 percent increase from the same period last year, reported the American Iron and Steel […]
Steel mill shipments have declined slightly since November on a seasonally adjusted basis, while the inventory-to-shipment ratio has increased slightly since October, according to Steel Market Update’s latest analysis of Census Bureau data. Steel trade association data from the AISI and MSCI is most widely used to assess the state of the industry. In addition, […]
U.S. Steel’s first-quarter earnings call was dominated by the news of the steelmaker’s planned $1.2 billion investment at Mon Valley Works to build an endless casting and rolling facility at its Edgar Thomson Plant and a cogeneration facility at its Clairton Plant. CEO David Burritt called the project “transformative” for U.S. Steel, putting the company […]