Steel Products Prices North America
Weekly Raw Steel Production Rises to 1.74 Million Tons
Written by Brett Linton
April 18, 2017
For the week ending April 15, 2017, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,740,000 net tons of raw steel, a 2.2 percent increase over the previous week and a 2.5 percent increase over the revised rate from the same week one year ago. The estimated capacity utilization rate for steel production is 74.6 percent, up from 73.0 percent last week and up from 72.6 percent this time last year.
Estimated total raw steel produced for 2017 YTD is reported to be 25,994,000 tons, up 3.8 percent from the 25,053,000 tons produced during the same period in 2016. The average capacity utilization rate for 2017 YTD is estimated to be 74.3 percent, up from 71.6 for 2016 YTD.
Week-over-week changes per district are as follows: Northeast at 195,000 tons, up 7,000 tons. Great Lakes at 645,000 tons, up 18,000 tons. Midwest at 173,000 tons, up 5,000 tons. South at 647,000 tons, up 4,000 tons. West at 80,000 tons, up 3,000 tons. Total production was 1,740,000 tons, up 37,000 tons.
The AISI estimates production capability for Q1 2017 at approximately 31.2 million tons, compared to 30.4 million tons for Q1 2016 and 31.2 million tons for Q4 2016.
About Weekly Raw Steel Production Data
The weekly raw steel production tonnage provided by the AISI is estimated. The figures are compiled from weekly production tonnage provided by 50 percent of the domestic producers combined with monthly production data for the remainder. Therefore, this report should be used primarily to assess production trends. The monthly AISI production report provides a more detailed summary of steel production based on data supplied by companies representing over 75 percent of U.S. production capacity.
SMU Note: Below is a graphic showing the weekly raw steel production history. To use the graphs interactive capabilities, you must view it on our website. You can do this by clicking here. If you need help navigating the website or need to know your login information, contact us at info@SteelMarketUpdate.com or by calling 800-432-3475.
Brett Linton
Read more from Brett LintonLatest in Steel Products Prices North America
September Import Share of US Sheet and Plate Markets
Imported sheet and plate products arrived at US ports at a slower clip in September, accounting for a lower share of the domestic market for the third straight month. That’s according to a Steel Market Update analysis of import data from the US Commerce Department and domestic shipment figures from the American Iron and Steel […]
US Apparent Steel Supply Falls Further in September
US apparent steel supply eased further in September, down 8% from August to 8.29 million net tons, according to data from the US Department of Commerce and the American Iron and Steel Institute (AISI). As the lowest monthly figure since February 2021, this was a 19-month low. September supply was 10% below the average monthly rate […]
Northwest Pipe Reports Sharply Higher Q3 Results
Engineered pipe and tube producer Northwest Pipe Co. posted sharply higher profits for the third quarter ended Sept. 30. The Vancouver, Wash.-based company said the boost was driven by strong demand and increasing backlogs from its engineered pipeline systems and precast products, according to earnings data released on Tuesday, Nov. 8 All told, Northwest Pipe posted net […]
SMU Price Ranges: Flat-Rolled Steel Falls (Yet Again)
Sheet prices fell across the board again this week as the slow grind lower that we’ve seen since last spring continued to gain speed. Hot-rolled coil prices fell $30 per ton ($1.50 per cwt) week-over-week. Declines in coated products were more pronounced, with cold rolled down $55 per ton, galvanized down $35 per ton, and […]
US Steel Exports Slip 10% in September
US steel export volumes shrunk 10% from August to September, according to the latest US Commerce Department data. 723,000 net tons of steel products exited the country during the month, now the fourth-lowest monthly export rate over the past year and a half. Recall that exports levels in August were at the third-highest monthly rate […]