Steel Products Prices North America

Hot Rolled Imports by Product Detail, Through March 2019
Written by Peter Wright
May 20, 2019
Premium subscribers to Steel Market Update have reports available on our website that break out the import tonnage into district of entry and source nation for six sheet and plate product categories. This report takes the total national tonnage of hot rolled and breaks it down into product detail.
Using U.S. International Trade Commission (USITC) data, SMU has taken the import tonnage of HRC and broken it down into sheet and strip, and whether it was in coil or leveled. Then it separates three gauge ranges, it breaks out how much was P&O, how much was high strength and how much had patterns in relief. The balance is assumed to be commercial hot rolled.
Table 1 is a monthly summary and year-to-date 2019 for each of the above conditions.
Figure 1 breaks the year-to-date tonnage down into commercial HR sheet, pickled and oiled, high strength and sheet with embossed patterns.
Figure 2 breaks the year-to-date tonnage down into three gauge ranges—light, medium and heavy.
Figure 3 breaks hot rolled sheet imports into coiled and leveled tonnage
Figure 4 breaks hot rolled strip imports into coiled and leveled tonnage
Using the combination of SMU import reports, steel buyers know exactly how much hot rolled came into both their region and their immediate district and where it came from. At the national level they know what the tonnage by gauge was, how much was pickled and oiled, how much was high strength and how much had patterns in relief.
Note: This data was accessed through the USITC database. All steel traded globally is classified by the Harmonized Tariff System (HTS). The HTS code has 10 digits. The first six are globally universal. The last four are used at the discretion of the nations involved in a particular transaction and are the basis of this report. The way the U.S. uses the last four digits to define products may be different from other nations’ product classification.

Peter Wright
Read more from Peter WrightLatest in Steel Products Prices North America

HRC-galvanized price gap edges higher
The premium galvanized coil carries over hot-rolled coil (HRC) coil has marginally widened in recent months. As of Sept. 16, the spread between these two products reached a three-month high of $175 per short ton (st), though it is still low by historical standards.

SMU Price Ranges: HR slips, hopes for Q4 rebound still standing
SMU’s price ranges were mixed again this week as the market continues to seek a floor amid industry hopes for a Q4 rebound.

Nucor’s hot band list price holds at $875/ton
Nucor held its hot-rolled coil list price flat again this week, according to its Monday, Sept. 15 consumer spot price (CSP) notice.

Market says cutting interest rates will spur stalled domestic plate demand
Market sources say demand for domestic plate refuses to budge despite stagnating prices.

SMU Price Ranges: Some predict bottom is near as big discounts dry up
Sheet prices were mixed this week as some mills continued to offer significant discounts to larger buyers while others have shifted toward being more disciplined, market participants said.