• Skip to main content

    Market Segment

    November 29, 2022

    USS's Mon Valley No. 3 BF to Remain Idled Until Market Improves

    Written by David Schollaert

    US Steel Corp. will keep the No. 3 blast furnace at its Mon Valley Works near Pittsburgh idled until market dynamics improve, a company spokeswoman confirmed to SMU. US SteelThe blast furnace was originally taken offline on Aug. 30 for a month-long planned maintenance outage. The shotcrete (sprayed concrete) reline was completed on Saturday, Sept. 24. US Steel originally confirmed to SMU back in late September that, once the reline was completed, the blast furnace would remain idle. At that time, sources familiar with the matter told SMU the idling would be for a month or so in response to declining demand and market conditions. Downtime appears to have been extended with no set timetable for a restart. No. 3 has not been idled indefinitely. But the furnace will remain down as US Steel continues “to balance our production with our order book,” the spokeswoman said. In yesterday’s price hike letter, the Pittsburgh-based steelmaker said that it was raising its base pricing for all new flat-rolled product orders given that its order book for the balance of 2022 was complete. The spokeswoman added that the “planned maintenance on BF 3 was completed and the furnace is available for use.” There are no layoffs associated with the decision to keep the furnace offline, she noted. The Mon Valley Works has two blast furnaces: No. 1 and No. 3. The No. 1 furnace has a daily ironmaking capacity of approximately 3,200 tons. The No. 3 furnace has a daily capacity of approximately 2,900 tons. The furnaces are located at US Steel’s Edgar Thomson plant in Braddock, Pa. That facility makes slabs and rails them to the company’s Irvin Plant in West Mifflin, Pa., where they are rolled into sheet. By David Schollaert, David@SteelMarketUpdate.com  

    David Schollaert

    David Schollaert is deputy editor-in-chief for Steel Market Update. David joined SMU after more than a decade in the metals and mining industry in a myriad of different roles. Much of his early experience and expertise were within the coverage and analysis of steel-making raw materials and served previously as senior editor of the CRU Prices Service. Most recently, however, before his return to market analysis, David held roles as a metals buyer and an operations manager for raw material suppliers. He can be contacted at david@steelmarketupdate.com or 724-720-1008.

    Read more from David Schollaert

    Latest in Market Segment

    Price on Trade: Steel’s zero-sum game

    During the first three quarters of 2026, finished steel imports from South Korea increased 50.8% compared with the same period in 2025. Imports from Vietnam increased 23.4%, imports from Turkey increased 49.5%, and imports from India increased 29.5%. Those are not marginal increases. They are substantial import surges, especially in a US market where apparent domestic consumption has bounced around but has not grown since 2017. More importantly, these import surges are arriving at lower average unit values (AUVs).

    Mesabi Metallics chooses Midrex for Iowa mill DRI module

    Mesabi Metallics, part of the Essar Group, has picked Midrex Technologies to supply the direct-reduced iron (DRI) component of its planned $15 billion steelmaking complex in Iowa. Recall the company announced plans to build a 10-million-ton-per-year mill, which would make it by far the largest steel plant in the US. The first phase is planned for 7.5 million tons of steel per year, with first production planned for 2030. Midrex’s Flex technology will be used for the DRI portion of the project, producing hot DRI for direct feed to the adjacent electric-arc furnaces (EAFs), as well as hot briquetted iron (HBI).

    Fed Beige Book finds stronger steel, machinery demand but rising cost pressure

    Manufacturing activity improved in several Federal Reserve districts, but conditions remained mixed nationwide, according to the Fed’s Oct. 14 Beige Book report. Demand was strongest in steel, machinery, defense-related products, and data center infrastructure. Steel producers in the Cleveland District reported firm spot market demand. Data center, power-generation, defense, and aerospace projects supported orders. Long mill lead times kept customer inventories lean and prices high. Producers also reported higher orders from truck-trailer and light-vehicle manufacturers. International demand for hydrogen vehicle parts increased.

    Nucor Plate Group doubles fuel surcharge to $40/ton for November

    Nucor Plate Group said it will increase its fuel surcharge to $40 per short ton (st) next month, effective for all shipments beginning Nov. 1. The Charlotte, N.C.-based steelmaker first said in April that the fuel surcharge was necessary to address rising costs, initially setting the surcharge at $10/st on April 16. The company had previously maintained the $10/st surcharge rate for four straight months through Aug. 17. But it has since doubled its rate in back-to-back months—increasing its surcharge to $20/st in September, followed by its Oct. 15 notice to $40/st. “We remain committed to providing reliable service and transparency as we adapt to changing market dynamics,” Nucor said in a letter to customers on Thursday evening. Nucor announces the surcharge amount on or about the 15th of each month for shipments beginning the following month.

    SMU Survey: Mill negotiation rates rise on sheet, fall for plate

    Sheet buyers found mills slightly more negotiable on price this week, while plate buyers thought mills were less flexible on spot price tags, according to our latest survey data. Every two weeks, SMU surveys service center and manufacturer buyers to see whether mills will negotiate on new spot sheet and plate orders. In this week’s survey, 14% of respondents said mills were willing to talk price to secure an order, up three percentage points from two weeks earlier (Figure 1). This is the highest reading since July 8, when the rate stood at 18%.