ArcelorMittal Burns Harbor called firefighters to help control a towering blaze from a coke oven battery late Tuesday night. ArcelorMittal spokeswoman Mary Beth Holford said the plant “experienced a high voltage power interruption for a short duration” about 10:05 p.m. Tuesday. The outage triggered an emergency flare system that burned off excess coke oven gas, […]
A petition filed with the U.S. Commerce Department on Feb. 4 alleges that fabricated structural steel from Canada, China and Mexico is being dumped on the U.S. market and is benefitting from countervailing subsidies. Products covered by the petition include carbon and alloy (including stainless) steel products such as angles, columns, beams, girders, plates, flange […]
The European Union has initiated new safeguard measures on steel imports to replace provisional ones introduced in July 2018. The measures are designed to protect the steel industry in the EU from excessive imports diverted there as a result of the Section 232 tariffs in the United States. An investigation into the potential increase of […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: Congress started the year in international trade by introducing bills to limit presidential authority to order import restrictions. There are two significant pieces of legislation in the House and one in the Senate. I will briefly summarize the […]
Steel Dynamics Inc. announced it will acquire a 75 percent equity interest in Galvalume supplier United Steel Supply (USS), with an option to gain the other 25 percent in the future. United Steel Supply, Austin, Texas, is a leading distributor of painted Galvalume flat rolled steel used for roofing and siding applications. The company operates […]
Two manufacturing associations came out with opposing views on Wednesday to a new bill that would limit presidential power for the execution of trade measures under Section 232. The Bicameral Trade Authority Act of 2019, introduced in the House and Senate, would require congressional approval before the president could take trade actions, like tariffs and […]
U.S. Steel’s full-year net earnings nearly tripled from 2017 to 2018, but company executives were disappointed in fourth-quarter results for the Europe and tubular segments. Net earnings for the year totaled $1.1 billion compared to $387 million for 2017. Adjusted EBITDA was $1.76 billion compared to $1.15 billion a year ago, including $1.25 billion generated […]
AK Steel announced that it will permanently close its Ashland Works facility in Kentucky by the end of 2019. The blast furnace and hot end operations were idled in 2015, but AK Steel continued to operate a single hot-dip galvanizing coating line. Ashland’s 330,000 tons of loaded production will be transferred to other units in […]
Nucor Corp. surpassed expectations for 2018, reporting net earnings of $2.36 billion for the full year compared to $1.32 billion in 2017. Net sales jumped 24 percent to $25.07 billion due to a 5 percent increase in tons shipped and an 18 percent jump in the average sales price per ton. Nucor shipped 27.9 million […]
The big news for AK Steel this week was the closing of Ashland Works, but the company also posted remarkable financial results for full-year 2018. Sales in 2018 increased 12 percent to $6,818.2 million, generating net income of $186.0 million, a 25 percent increase from 2017. Increased sales were driven by higher carbon steel pricing […]
A bill limiting the president’s authority to impose tariffs under the auspice of national security will be introduced in Congress next week. Sen. Pat Toomey (R-PA) will introduce a bill that would require the president to obtain approval from Congress before imports could be restricted under Section 232 of the Trade Expansion Act of 1962. […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: The Court of International Trade (CIT) has rejected the U.S. Commerce Department’s finding that a “particular market situation” justifies steep antidumping margins against South Korean exports of oil country tubular goods (OCTG) to the United States. In a […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: The dust hasn’t settled yet from the partial government shutdown that ended Friday night. Already, though, thoughts turn to the issues that divide us as a country. As a trade person, I naturally focus on that issue. You do […]
U.S. Steel has launched a dedicated website to keep residents near its Clairton Coke Plant advised of repair updates following a fire at the plant Dec. 24 that released harmful air emissions, but residents and environmentalists are calling for the idling of the plant until repairs are completed. A fire caused significant damage to the […]
Steel Dynamics is excited about its recently announced plans for a new steel mill in the Southwest. After an outstanding year, breaking records for shipments, sales, net income and cash flow, CEO Mark Millett is looking forward to filling a steel void in the southwestern U.S. and Mexico. Steel Dynamics hopes to announce a site […]
U.S. ports reported a record year for cargo volume in 2018. The Port of Los Angeles broke its all-time cargo record for the third time in a row, moving 9,458,749 TEUs (twenty-foot equivalent units the size of a container), a 1.2 percent increase from 2017. The Port of New Orleans reported a new record and a […]
The electric arc furnace and caster at JSW Ohio are slowly producing more slabs after the re-start of the furnace back on Dec. 14, 2018. The furnace is running just about every day at this point, according to SMU sources. However, it is being limited to just a few heats. The mill’s goal is to […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: New 232 Lawsuit A new complaint against the United States was filed on Thursday, Jan. 17, by three U.S. importers of Turkish steel to contest the doubling of tariffs on Turkish steel into the United States. The plaintiffs are […]
Truckload capacity eased following the holidays, reducing average rates for dry van, reefers and flatbed trucks. DAT Trendlines reports the national load-to-truck ratio fell from 33.7 to 25.1 loads per truck in the week Jan. 6 through Jan. 12. Flatbed rates came down four cents to a national average rate of $2.42 per mile during […]
NLMK USA sales improved 2.0 percent year-over-year in 2018 to 2.28 million metric tons. Results were driven by increased sales of hot-rolled steel and galvanized flats in the U.S. Sales slumped during the fourth quarter as customers put purchases on hold in expectation of lower steel prices. Sales slid 15 percent from the third quarter […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: A bill set for introduction today in the House of Representatives would, if enacted, fundamentally change the basics of U.S. policy on international trade. Rep. Sean Duffy (R-Wis.) will introduce the bill, which was drafted by the Trump administration. […]
Don’t expect to have your Section 232 exclusion request looked at any time soon. The Commerce Department has announced that, due to the number of furloughed employees during the partial government shutdown, it will temporarily suspend processing of Section 232 exclusions. Contingency plans at the nation’s trade offices have dramatically reduced the number of people […]
With no end in sight for U.S.-imposed steel tariffs, United Steelworkers in Canada urge the federal government to keep safeguards in place to guard against foreign steel imports. “Our members themselves are appearing this month before the Canadian International Trade Tribunal (CITT) to make the case for extending safeguard measures beyond the original 200-day period […]
Steel Dynamics has announced additions and changes to its senior leadership team. Two new positions have been created to support SDI’s presence in the Southwest and Mexico. Miquel Alvarez will join Steel Dynamics in the new position of Senior Vice President, Southwest and Mexico. He will be responsible for the comprehensive business development and partnerships […]
Union Partners, a full-service metals and logistics company, announced that Steve Letnich will join the company as Chief Operating Officer of Contractors Steel, effective immediately. Letnich has held several leadership positions in his 25 years in the steel and metals industry including those at Outokumpu, Castle Metals, Central Steel & Wire and Worthington Industries. “We […]
Ryerson Steel has sold a Central Steel & Wire facility in Milwaukee to Alro Steel for $7.1 million. CS&W was acquired by Ryerson in July. In its third-quarter 2018 earnings report, Ryerson stated it expected to receive about $10.5 million in proceeds from the sale of two midwestern CS&W facilities after consolidating operations into existing […]
The Commerce Department’s research on the national security implications of auto and auto part imports has generated numerous drafts, said Commerce Secretary Wilbur Ross, because “the picture keeps evolving.” The latest Section 232 draft includes three options for President Trump to consider when weighing if tariffs on the foreign auto industry would be good for […]
U.S. tariffs on steel imports from Canada continue to put pressure on Canadian producers while goverment officials seek an ending to the trade measures. Algoma Steel, which recently emerged from bankruptcy protection, is one of the vulnerable steel producers affected by Section 232. The second largest mill in Canada is expected to receive up to […]
Residents near U.S. Steel’s Clairton plant were told to limit outdoor activities on Wednesday due to sulfur dioxide emissions following a December fire at the Pennsylvania coke works. “We have been closely monitoring this issue since we were first notified of the fire on December 24th. While the plant has substituted natural gas for coke […]
Nucor Corp. announced on Monday that it is scouting the Midwest for a suitable location to build a $1.35 billion EAF mill that is capable of producing 1.2 million tons of steel plate products annually. Nucor expects site selection to be completed in 2019 and construction to begin as soon as permits are secured. The […]