With three quarters of its fiscal year in the books, Friedman Industries Inc. says it is on track to achieve a record year – but not without a few bumps in the road. The Texas-based steel processor and manufacturer reported a net loss of $2.96 million on sales of $51.66 million in its third quarter […]
By Trade Attorney Lewis Leibowitz On Feb. 7, the United States and Japan announced their long-expected deal to replace most of the Section 232 tariffs on steel (25%) with a tariff rate quota or TRQ. The overall quota from Japan will be about 1.25 million metric tons per year, which is far smaller than imports […]
Cleveland-Cliffs Inc. could join other steel producers in adding electric-arc furnace (EAF) capacity, the company’s top executive said. The Cleveland-based steelmaker is considering that because the cost of relining a blast furnace – and investing in the supply chains needed to feed it – are roughly the same as those for of building a new EAF. […]
Cleveland-Cliffs Inc. posted a near-record profit in the fourth quarter and predicted that the good times would continue to roll into 2022 thanks to fixed-price contracts resetting at higher numbers. That prediction comes largely because automakers, which typically buy steel on contract terms, were forced to limit production in 2021 because of the global chip […]
After the close of the market today, Canada’s Russel Metals reported net earnings of $432 million (U.S. $340 million) on annual revenues of $4.2 billion (U.S. $3.3 billion) for fiscal year 2021. That’s a big improvement from earnings of just $25 million (U.S. $20 million) on revenues of $2.7 billion (U.S. $2.1 billion) in 2020 […]
Algoma Steel Group swung to a profit in its fiscal 2022 third quarter thanks to steel prices rising faster than raw material and energy costs. The Sault Ste. Marie, Ontario-based sheet and plate producer also said that construction was underway for its transition to electric-arc furnace (EAF) steelmaking. All told, the company recorded net income […]
Mill Steel Co. now ranks among the most successful companies in the United States whose top executives are women. The Grand Rapids, Mich.based service center has been certified as an Exceptional Women’s Business Enterprise by the Women’s Business Enterprise National Council. “We are always looking for ways to enhance our customer service and meet the needs […]
ArcelorMittal recorded earnings of $4.05 billion in fourth-quarter 2021, besting the same year-ago quarter by more than threefold, despite lower shipment volumes, due to sharply higher steel prices. For the year, global earnings for the Luxembourg-based miner and steelmaker reached $14.97 billion, up from a loss of $733 million in 2020 despite a 9.0% decrease in […]
Cleveland-Cliffs Inc. is expected to take an approximately 80-90 day planned outage on the No. 5 blast furnace at its Cleveland Works starting in mid to late March, according to market participants. The outage is expected to last until roughly mid-June. It is not expected to impact customers because the Cleveland-based steelmaker can stock slabs […]
Service center industry stalwart Al Glick, who founded Alro Steel with his brother Robert in 1948, passed away today at age 95. In addition to his leadership of Jackson, Mich.-based Alro, which is now among the top-ranked service centers in North America, Glick was well known as a big supporter and fan of the University […]
U.S. Steel Corp. has officially broken ground on the expansion of its Big River Steel electric-arc furnace (EAF) sheet mill in Osceola, Ark. The ceremony was attended by U.S. Steel President and CEO David Burritt as well as local and state officials. The project features an endless casting and rolling facility – the first of […]
Cleveland-Cliffs’ Ashland Works, once the lifeblood of four-generations of residents in the Kentucky community, is now a pile of rubble. The steel mill had operated for the better part of 100 years on the Ohio River. Its Amanda blast furnace was decomissioned in 2015. And the entire mill was permanently closed in 2019, shortly before Cleveland-Cliffs acquired […]
The U.S. has announced that a deal has been reached with Japan to ease Section 232 national security tariffs on steel imports from the key U.S. ally. The U.S. Commerce Department and the Office of the U.S. Trade Representative announced the deal at around 5 pm Eastern Time on Monday, Feb. 7, as SMU had […]
The United States and Japan are expected to announce this afternoon a new deal on Section 232 regarding Japanese steel exports to the U.S., according to sources familiar with the matter. The new agreement will be a tariff rate quota, or TRQ, broadly similar to one negotiated between the U.S. and the EU last year. […]
By Trade Attorney Lewis Leibowitz The White House released a long-awaited decision on the future of special safeguard remedies for the solar industry on Friday. The decision may provide a glimpse into the trade philosophy of the Biden administration. First, a bit of background. The Trump-era tariffs began in January 2018 with decisions under the […]
Steel Dynamics Inc. (SDI) has melted, cast and rolled the first coil at its new steel mill in Sinton, Texas. Employees of the Fort Wayne, Ind.-based steelmaker celebrated the occasion on social media platforms such as LinkedIn. The first coil both melted and rolled at Sinton was produced on Wednesday. SDI had previously been running […]
The American Iron and Steel Institute sent a letter to House members Wednesday urging them to support the America COMPETES Act of 2022, which aims to enhance U.S. competitiveness to counter alleged nonmarket policies and practices by China. The legislation will strengthen the U.S. trade remedy laws by making more tools available to obtain timely […]
House passage of the America COMPETES Act this week proposes greater investment in American manufacturing and scientific research, as well as changes in trade policy to counter China’s growing economic influence around the world. But the measure must still overcome strong partisan opposition to reconcile it with the Senate version before it can become law. […]
Nucor has closed its $400 million deal for a majority stake in California Steel Industries (CSI). “We are excited to officially welcome our CSI teammates to the broader Nucor family,” said Rex Query, Nucor’s Executive Vice President of Sheet and Tubular Products. “This joint venture gives us a strong presence in the Western region and grows our ability to produce […]
NLMK USA posted the best results on record in its fourth-quarter earnings, driven by historically high steel prices despite normalizing demand. The U.S. subsidiary of NLMK Group – Russia’s largest steelmaker – reported earnings of $373 million in Q4, up 5% sequentially and more than tripling the results seen during fourth-quarter 2020. Though U.S. sales […]
Allegheny Technologies Inc. (ATI) swung to a net loss of $29.8 million in the fourth quarter of 2021 after posting a profit of $48.7 million in the prior quarter. The result was nonethless an improvement compared to the net loss of $1.121 billion posted by the Pittsburgh-based specialty materials producer in the fourth quarter of […]
Majestic Steel USA Inc. has hired Sean Madigan as Vice President of Sales, Manufacturing. Madigan joins Majestic from Nucor, where he served as the Sales and Marketing Manager for Nucor Steel Arkansas. Madigan’s experience with Nucor was integral to the startup of the company’s new coating line, and he will continue to be a critical part of the […]
Algoma Steel Group Inc. has awarded GE Gas Power (GE) the contract to upgrade its natural gas combined cycle power plant to support the power requirements of the steelmaker’s new electric arc furnace (EAF). The Sault Ste. Marie, Ontario-based steelmaker said the upgrade, which includes the installation of two gas turbine packages, is expected to […]
U.S. Steel has named Daniel R. Brown as Senior Vice President of Advanced Technology Steelmaking and Chief Operating Officer of its Big River Steel Works. Brown, who held the position of vice president at BRS, will not only lead the flat rolled steel production presently in place at BRS, but also the new minimill in Osceola, Ark., […]
The Ports of Indiana handled more than 11.2 million tons of cargo in 2021, resulting in a 33.6% increase from 2020. Steel and steelmaking materials made up a big chunk of the increase. Major cargo increases last year for the Ports of Indiana overall included a rebound in coal (213%), salt (141%), steel (40%), grain (39%), minerals (23%), oils […]
Steel Dynamics Inc. (SDI) has closed its acquisition of a 45% stake in New Process Steel LP, a manufacturer and distributor that is also the company’s largest flat-rolled steel customer. The Fort Wayne, Ind.-based steelmaker announced the deal in mid-October. Terms were not disclosed. “This minority equity interest enables us to expand our exposure to […]
Nucor Corp. today announced plans to invest $290 million to upgrade its Crawfordsville, Ind., steel sheet mill. The Charlotte, N.C.-based steelmaker will expand the mill’s product capabilities by adding a 300,000 tons per year (tpy) construction-grade continuous galvanizing line and a 250,000 tpy prepaint line, the company said. The project, which company executives alluded to during […]
The North American operations of Evraz produced 1.88 million metric tons in 2021, an 18.9% improvement over 2020 despite some falloff near the end of the year, the company said in its Jan. 31 trading update. The Russia-based steelmaker reported fourth-quarter 2021 production of 480,000 metric tons in North America, a 2.2% decline from the […]
By Trade Attorney Lewis Leibowitz We are hearing a lot about “managed trade” these days from economists, pundits and politicians. It’s time to step back and think about the pros and cons of that concept. First, we should define the term “managed trade.” Trade is usually conducted between private parties for their mutual gain. Governments […]
U.S. Steel isn’t letting current lower prices get it down after a record year in ’21 and in anticipation of more good times rolling into ‘22. The Pittsburgh-based steelmaker said it had expected the first quarter would be weaker but that such weakness would to be temporary. “Supply chain issues will ease, inflationary pressures will […]