Tag: domestic steel

US hot-rolled (HR) coil prices fell again this week – now on a 13-week run – causing tags to drift further below offshore hot band prices on a landed basis.

Domestic steel shipments increased in May month over month but have fallen on-year.

Domestic raw steel production inched up again last week to reach a four-week high, according to the latest release by the American Iron and Steel Institute (AISI).

Offshore cold-rolled (CR) coil remains cheaper than domestic product pricing even as US CR coil prices slip to an eight-month low. Domestic CR coil tags stood at $975 per short ton (st) on average in our check of the market on Tuesday, June 25, down $20/st from the week before. Domestic CR prices are, on […]

US hot-rolled (HR) coil prices have continued to drift lower, pushing them further below offshore hot band prices on a landed basis.

A press conference at a Cleveland-Cliffs mill in Ohio touched upon several topics, including the unfair trade practices of Mexico and China and Nippon Steel’s proposed acquisition of U.S. Steel.

Domestic raw steel production ticked up last week following a seven-week low, according to the latest release by the American Iron and Steel Institute (AISI).

Offshore cold-rolled (CR) coil prices are cheaper than domestic product despite US CR coil prices ticking lower. Domestic CR coil tags stand at $995 per short ton (st) on average, down $25/st vs. our prior check of the market on Tuesday, June 18. (We will update prices again on Tuesday, June 25.) All told, US […]

US hot-rolled (HR) coil prices fell further this past week, pushing them below offshore hot band prices on a landed basis.

Domestic raw steel production fell to a seven-week low last week, according to the latest release by the American Iron and Steel Institute (AISI).

Steel Dynamics Inc. guided to significantly reduced second-quarter earnings as its steel operations have taken a hit from lower prices.

Offshore cold-rolled (CR) coil prices have changed little, but they are still notably cheaper than domestic product. That remains the case even as US CR coil prices ticked lower this week.

The amount of finished steel available to the US market rose 1% from March to April, according to SMU calculations on Department of Commerce and the American Iron and Steel Institute (AISI) data.

US hot-rolled (HR) coil prices fell further this past week, bringing them even with offshore hot band prices on a landed basis.

Domestic raw steel production eased last week, falling from an eight-week high down to a four-week low, according to the latest release by the American Iron and Steel Institute (AISI).

Offshore cold-rolled (CR) coil prices remain notably cheaper than domestic product. That remains the case even as US CR coil prices continue to tick lower.

Domestic steel shipments ticked up month over month (m/m) in April but were down year over year.

US hot-rolled (HR) coil prices ticked down again this past week, nearly reaching parity with offshore hot band prices on a landed basis. This week, domestic HR coil tags were $730 per short ton (st) on average based on SMU’s latest check of the market on Tuesday, June 4. Domestic HR coil prices are now […]

When you step out of the airport in Phoenix in June, the heat tends to focus your mind. I was in town to attend the Steel Manufacturers Association/Metals Service Center Institute (MSCI) annual meeting in Scottsdale, Ariz. The desert locale with palm trees, swimming pools, and the obligatory high-powered air conditioning was fitting for 2024. Between the presidential election and the geopolitical situation, things have definitely been heating up.

Raw steel production in the US moved higher for a fifth straight week, the American Iron and Steel Institute (AISI) reported on Monday. AISI said US mills, operating at 78.5% of capabilities, produced an estimated 1,743,000 short tons (st) of raw steel in the week ended June 1. This was a 0.5% rise from the […]

We’re just a few months away from SMU’s Steel Summit 2024 – North America’s premier flat-rolled steel conference.

Offshore cold-rolled (CR) coil prices remain significantly cheaper than domestic product. That remains the cause even as US CR coil prices continued to tick lower. All told, US CR prices are now 17.6% more expensive than imports. While still high, that premium is down from 19.4% last week and down from 31.5% in early January.

US hot-rolled (HR) coil prices ticked down further this past week, moving closer to parity with offshore hot band prices on a landed basis. This week, domestic HR coil tags were $750/st on average based on SMU’s latest check of the market on Tuesday, May 28.

Raw steel production in the US inched higher for a fourth consecutive week, the American Iron and Steel Institute (AISI) reported on Tuesday.

Offshore cold-rolled (CR) coil prices remain a cheaper option over domestic product, even as US CR coil prices tick lower, according to SMU’s latest check of the market.

US hot-rolled (HR) coil prices declined again and now stand nearly even with offshore hot band on a landed basis.

JSW Steel USA has rejoined the Steel Manufacturers Association (SMA).

Domestic raw steel production continued to ramp up through last week, now up to a six-week high according to the latest release by the American Iron and Steel Institute (AISI).

President Biden announced an increase in tariffs this week on Chinese EVs, semiconductors, batteries, solar cells, steel, and aluminum.

SMU had the pleasure of attending the American Iron and Steel Institute's (AISI's) annual general meeting in Washington this week. It was a slow week in our nation's capital, so we were able to take a leisurely stroll around the National Mall and take in the sights. Just kidding. In fact, the meeting coincided with significant trade actions announced by the Biden administration. It included, among other things, additional tariffs on Chinese steel and aluminum.