International Steel Prices
Domestic HRC Prices Remain Attractive vs. Foreign Imports
Written by Brett Linton
May 9, 2019
The following calculation is used by Steel Market Update to identify the theoretical spread between foreign hot rolled steel prices (delivered to U.S. ports) and domestic hot rolled coil prices (FOB domestic mills). We want our readers to be aware that this is only a “theoretical” calculation as freight costs, trader margin and other costs can fluctuate, ultimately influencing the true market spread.
We are comparing the SMU U.S. hot rolled weekly index to CRU hot rolled weekly indices for Germany, Italy and the Far East (East and Southeast Asian port).
SMU now includes a 25 percent import tariff in our foreign vs. domestic price calculations, effective on foreign prices after March 23, 2018. We then add $90 per ton to the foreign prices in consideration of freight costs, handling, trader margin, etc. This provides an approximate “CIF U.S. ports price” that can then be compared against the SMU U.S. hot rolled price. The difference between the domestic and foreign hot rolled prices is then referred to as the “price spread.” As the price spread narrows, the competitiveness of imported steel into the United States is reduced. If the spread widens, then foreign steel becomes more attractive to U.S. flat rolled steel buyers. A positive spread means foreign steel has a price advantage (U.S. prices are higher than foreign prices), while a negative spread means domestic steel has a price advantage (U.S. prices are less than foreign prices). Note that we do not include any anti-dumping (AD) or countervailing duties (CVD) in this analysis.
As of Wednesday, May 8, the CRU German HRC price was $509 per net ton, down $10 from the previous week, and down $17 over two weeks prior. Adding tariffs and import costs, that puts the price at $726 per ton from Germany delivered to the U.S. The latest Steel Market Update hot rolled price average is $640 per ton for domestic steel, unchanged from both last week and two weeks ago. The spread between the German and U.S. HR price is now -$86 per ton, up from -$99 last week and up from -$108 two weeks ago. This means domestic hot rolled steel is theoretically $86 per ton cheaper than German steel imported into the U.S. The previous -$108 spread was the lowest spread seen in our 7+ year history, with the closest contender at -$99 in mid-January of this year. We are now on a 25-week negative spread streak. The four-week average price spread is now -$93 per ton, down $5 from last week.
CRU published Italian HRC prices at $463 per net ton, down $3 from last week and down $6 from two weeks prior. After adding tariffs and import costs, the delivered price of Italian HRC is approximately $669 per ton. Therefore, the spread is now -$29 per ton, up from -$33 last week and up from -$36 two weeks ago. That means domestic sourced steel is theoretically now $29 per ton cheaper than importing Italian HRC into the U.S. This is the seventh consecutive week with a zero or negative price spread. The four-week average price spread is now -$28 per ton, down $5 from last week.
The CRU Far East HRC price fell $5 over last week to $487 per net ton, down $6 from two weeks prior. Adding tariffs and import costs, the delivered price of Far East HRC to the U.S. is $699 per ton. The spread is now -$59 per ton, up from -$65 last week and up from -$66 two weeks ago, meaning domestic hot rolled steel is theoretically now $59 per ton cheaper than steel imported into the U.S. from Far East Asia. Mid-February marked the first negative spread since November 2017, and we are on a 13-week negative spread streak. The four-week average price spread is now -$57 per ton, down $8 from last week.
The graph below shows all four prices together and points out the effective date of the tariffs. Foreign prices are referred to as “equalized,” meaning they have been adjusted with the tariffs and importing costs for an apples-to-apples comparison against the U.S. price.
Note: Freight is an important part of the final determination on whether to import foreign steel or buy from a domestic mill supplier. Domestic prices are referenced as FOB the producing mill, while foreign prices are FOB the Port (Houston, NOLA, Savannah, Los Angeles, Camden, etc.). Inland freight, from either a domestic mill or from the port, can dramatically impact the competitiveness of both domestic and foreign steel. When considering lead times, a buyer must take into consideration the momentum of pricing both domestically and in the world markets. In most circumstances (but not all), domestic steel will deliver faster than foreign steel ordered on the same day.
Brett Linton
Read more from Brett LintonLatest in International Steel Prices
US, offshore HR prices inch closer to parity
US hot-rolled (HR) coil prices slipped this past week but remain marginally higher than offshore material on a landed basis.
US CR prices move up while import prices mixed
The price gap between US-produced cold-rolled (CR) coil and offshore products narrowed slightly in the week ended Oct. 4, mainly due to a price jump in Asian markets.
US, offshore HR prices diverge a bit more
US hot-rolled (HR) coil prices moved slightly higher again this past week but remain marginally higher than offshore material on a landed basis. Since reaching parity with import prices in late August, domestic prices have been slowly pulling ahead of imports. This has been driven by a slight deviation in price movements – slow but […]
Despite recent dip, US CR prices remain more expensive than imports
The price gap between US cold-rolled (CR) coil and offshore product has shrunk slightly this week ended Sept. 27 as stateside tags edged down. The premium slipped moderately but remains well ahead of the 10-month low from late July.
US HR prices up slightly vs. imports
US hot-rolled (HR) coil prices inched up again this past week but remain just a touch more expensive than offshore material on a landed basis.