• Skip to main content

    Product

    2019 SMU Steel Summit Conference – A Sneak Peek – Day 1

    Written by John Packard


    The Georgia International Convention Center (www.gicc.com) as well as the three Gateway Hotels (Marriott, Renaissance and SpringHill Suites) are all conveniently located at the first stop of the free SkyTrain out of the Atlanta International Airport (ATL). The second stop on the SkyTrain is for car rentals. Our overflow hotel – the Atlanta Airport Marriott – is located one exit south of the convention center. We will be running free shuttles from that hotel to the convention center during the conference. There is also a free shuttle from the airport to that hotel (cannot be reached by the SkyTrain).

    For almost one year, the Steel Market Update and CRU teams have been diligently working on putting together what we think will be an exceptional steel conference, one that will be remembered long after it is over. Today, I would like to go through a portion of the agenda to give those coming, as well as those who have not yet decided to attend, a sense of why certain agenda segments were selected, who the speakers are and what to expect out of this year’s event.

    Latest in Product

    Steel exports fall in September to lowest rate of the year

    US steel exports eased 3% from August to September, marking the third consecutive monthly decline following June’s 17-month high, according to recently released US Department of Commerce figures. Exports have been historically low since early 2025 and remain weak compared to volumes seen in prior years. In September, 615,000 short tons (st) of steel were shipped outside of the country, 2% below the average monthly export rate of the past twelve months. September trade was 3% higher than the same month of 2025, 19% lower than September 2024, 21% lower than September 2023, and 15% lower than September 2022. For context, exports fell to a five-year low of 469,000 st in December and reached a near-five-year high of 914,000 st in May 2023.

    Imports fall back slightly in September, slide further in October

    Final import data for September from the US Commerce Department shows a slight decline from August’s 15-month high. And October’s license count suggests another month-on-month (m/m) decline in imports. September imports of 2,416,717 short tons (st) were down just 1% from 2,434,108 st in August, a 15-month high. October license data show a steeper 8% m/m fall to 2,214,730 st (Figure 1, left). August appears to have been the peak for the recovery in imports, which has been ongoing since February of this year, when we saw some of the lowest levels since 2020.

    Ferrous scrap market chatter this month

    Every month, SMU polls participants in the ferrous scrap market on a variety of topics, including prices. This month's survey results landed just as the November scrap market was starting to settle. Preliminary results show scrap prices rose across the board for all the products SMU tracks. Final prices will be in SMU later this week. As the final numbers come in, we'd like to share where survey respondents thought prices would be on busheling, shredded, and HMS scrap, as well as where they see prices heading over the next 60 days.