Steel Products

Price gap between domestic, offshore CRC narrows
Written by David Schollaert
January 19, 2025
The price spread between US-produced cold-rolled (CR) coil and offshore products tightened in the week ended Jan. 17.
Domestic CR coil tags were lower week on week (w/w), while offshore products ticked higher. The result? The US premium over imports shrank.
In our market check on Tuesday, Jan. 14, US CR coil prices averaged $895 per short ton (st), down $15/st from the prior week. Prices peaked at $1,325/st a year ago before falling nearly $450/st by summer. They have since fluctuated by roughly $50/st at most.
Domestic CR prices are, theoretically, 19% more expensive than imports. That premium is down from 22.4% last week and from 31.5% a year ago. In dollar-per-ton terms, US CR is on average $136/st more expensive than offshore prices (see Figure 1). That’s down $26/st w/w and down from a premium of $311/st last January.
The charts below compare CR coil prices in the US, Germany, Italy, South Korea, and Japan. The left side shows prices over the last two years and the right side zooms in to highlight more recent trends.

Methodology
This is how SMU calculates the theoretical spread between domestic CR prices (FOB domestic mills) and foreign CR prices (delivered to US ports): We compare SMU’s US CR weekly index to the CRU CR weekly indices for Germany, Italy, and East Asia (Japan and South Korea). This is only a theoretical calculation. Import costs can vary greatly, influencing the true market spread.
We add $90/st to all foreign prices as a rough means of accounting for freight costs, handling, and trader margin. This gives us an approximate CIF US ports price to compare to the SMU domestic CR price. Buyers should use our $90/st figure as a benchmark and adjust up or down based on their own shipping and handling costs. (Editor’s note: If you import steel and want to share your thoughts on these costs, please get in touch with the author at david@steelmarketupdate.com.)
East Asian CR coil
As of Thursday, Jan. 16, the CRU Asian CR price was $517/st, up $14/st w/w but ~$30/st lower than a month ago. Adding a 71% anti-dumping duty (Japan, theoretical) and $90/st in estimated import costs, the delivered price to the US is $974/st. The theoretical price of South Korean CR exports to the US is $607/st.
As noted above, the latest SMU CR price is down $15/st at $895/st on average, placing US-produced CR theoretically $79/st below CR product imported from Japan but $288/st above CR imported from South Korea.


Italian CR coil
Italian CR prices were $636/st, up just $2/st this week. After adding import costs, the price of Italian CR delivered to the US is, in theory, $726/st.
That means domestic CR is still theoretically $169/st more expensive than CR coil imported from Italy. The spread is down $17/st vs. last week and ~$279/st below a recent high of $448/st a year ago.

German CR coil
CRU’s German CR price was up $4/st vs. the previous week. After adding import costs, the delivered price of German CR is, in theory, $728/st.
The result: Domestic CR is theoretically $205/st more expensive than CR imported from Germany. The spread is down $19/st w/w and well below a recent high of $428/st in the first week of 2024.

Notes: We reference domestic prices as FOB the producing mill, while foreign prices are CIF the port (Houston, NOLA, Savannah, Los Angeles, Camden, etc.). Inland freight from either a domestic mill or a port is important to keep in mind when deciding where to source from. It’s also important to factor in lead times. In most market cycles, domestic steel will deliver more quickly than foreign steel. Note also that, effective Jan. 1, 2022, the blanket 25% Section 232 tariff was removed from most imports from the European Union. It was replaced by a tariff rate quota (TRQ). Therefore, the German and Italian price comparisons in this analysis no longer include a 25% tariff.

David Schollaert
Read more from David SchollaertLatest in Steel Products

US and Canadian rig counts stabilize
US counts continue to hover just above historic lows, while Canadian figures remain comparatively healthy.

Plate market sources critique mill hikes amid current market conditions
Following spot market plate price increase notices issued by domestic mills this past week, participants are contemplating the rationale behind the increases and whether they will stick. Some sources anticipate that current market conditions will shift in November and believe the increases may set a new "pricing floor."

Oregon Steel Mills lifts plate prices by $60/ton
Oregon Steel Mills has joined other producers in announcing a price increase of at least $60 per short ton on steel plate.

CRU: Construction of pilot plant for green steel process starts
Voestalpine and partners have begun building an industrial-scale Hy4Smelt demonstration plant in Linz, Austria, which they hope will become key in the decarbonization of steel.

Rig count increases in the US and in Canada
Oil and gas drilling activity increased this week in the US and Canada for the third consecutive week, according to the latest Baker Hughes rig count data. US counts continue to hover just above historic lows, while Canadian figures remain comparatively healthy.