For the week ending December 28, 2013, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,773,000 net tons of raw steel, a 2.3 percent increase over the previous week but a 0.7 percent decrease over the same week one year ago. The estimated capacity utilization rate is 74.0 percent, […]
Ferrous scrap prices are expected to rise as we enter the New Year. Early indications are for scrap prices to make a rather serious move as cold weather sets into the North, further reducing already weak flows of the material into the scrap yards. Prices are forecast to move a minimum of $20-$30 per gross […]
Flat rolled steel prices remained range bound over the past few days due to the Holidays and most buyers being out of the office. At the same time, U.S. Steel, NLMK USA, Nucor and ArcelorMittal USA have all come out with new base price guidance for new orders. The expectation from most buyers is for […]
According to the most recent U.S. Department of Commerce import license data, Chinese exports of cold rolled into the United States are beginning to surge. Based on license data through the 24th of December, cold rolled imports from China totaled 76,419 net tons of the 159,416 net tons requesting licenses. Since October 2012 the previous […]
On Monday, December 23, 2013 Nucor Sheet Mill Group advised their flat rolled customers that “due to higher raw material prices, the Nucor Sheet Mill Group will increase base pricing to the following levels, effective immediately:” Hot Rolled = $35.00/cwt ($700 net ton) Cold Rolled = $40.50/cwt ($810 per ton) Galvanized = $40.50/cwt ($810 per […]
In a letter to their customers dated today, Monday, December 23, 2013 – NLMK USA opened their February order book and advised their customers of their “minimum” new base price levels: Hot Rolled $35.00/cwt ($700 per ton)Cold Rolled $40.50/cwt ($810 per ton)Coated $40.50/cwt ($810 per ton)Specialty $25/ton increase on all high […]
According to Baker Hughes data from December 27, 2013, the U.S rig count for this week is 1,757 rigs exploring for or developing oil or natural gas. This count is a decrease of 11 rigs when compared to last week, with oil rigs down 13 to 1,382 rigs, gas rigs up 2 to 374 rigs, […]
For the week ending December 21, 2013, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,733,000 net tons of raw steel, a 4.7 percent decrease over the previous week and a 2.9 percent decrease over the same week one year ago. The estimated capacity utilization rate is 72.3 percent, […]
I thought our Premium Level readers might appreciate the latest forecast from Timna Tanners, Bank of America Merrill Lynch metals and mining analyst. Timna was a little “light” in her price forecast for 2013 hot rolled coil which was originally $555 average and was upgraded during the year to $622. Tanners believes some of the […]
Production declined by 5.0 percent from October to 127,364,000 tonnes, partly due to less days in the month but this was also the lowest monthly tonnage since February. Capacity utilization was 74.0 percent. The annualized three month moving average production was 1.576 billion tonnes through November (Figure 1). Capacity is now 2.076 billion tonnes. Global […]
U.S. Steel – POSCO Industries (UPI) has opened their March flat rolled steel order book and in the process the company has put out a letter to their customers advising of the new minimum base prices the mill will be charging for hot rolled pickled & Oiled (HRPO), cold rolled (fully annealed) and hot dipped […]
According to The Steel Index (TSI), iron ore spot prices were reported at $132.7 per dry metric ton CFR Tianjin Port (China) for 62% Fe fines and $120.5/dmt on 58% Fe fines. Trading was quiet this week as TSI reported 62% Fe prices down $3.30/dmt and 58% Fe prices down $4.70/dmt over the past week. […]
According to Baker Hughes data from December 20th, 2013, the U.S rig count for this week is 1,768 rigs exploring for or developing oil or natural gas. This count is a decrease of 14 rigs when compared to last week, with oil rigs down 16 to 1,395 rigs, gas rigs up 3 to 372 rigs, […]
Financial Markets: Well two weeks back the S+P held that 1775 zone it tested. It has since rallied back to new highs yesterday at 1806.75, this for the March future. Yesterday the Fed announced the beginning of the easing of the easing, or bond buyback program. The Fed will start to taper their bond buying […]
The US International Trade Commission said it will not revoke the antidumping and countervailing duty orders on hot-rolled steel products from China, India, Indonesia, Taiwan, Thailand, and Ukraine. The Dec. 17 decision was the result of a required five-year (sunset) review process. US ITC said that revoking the orders “would be likely to lead to […]
On Monday U.S. Steel put out a letter to their customers announcing a $20 per ton flat rolled spot price increase. The letter was from RY Kopf, General Manager North American Flat-Rolled Marketing and it read as follows: Effective immediately, base pricing for all new Flat-rolled products spot orders is increased by a minimum of […]
U.S. Steel announced a price increase on Monday and the market appears to be cautiously optimistic as we enter the end of 2013 and look out into the New Year. The announcement itself was termed a “non-event” by one of the construction related steel mills with whom we spoke this afternoon as increases had previously […]
For the week ending December 14, 2013, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,818,000 net tons of raw steel, a 0.6 percent decrease over the previous week but a 1.8 percent increase over the same week one year ago. The estimated capacity utilization rate is 75.9 percent, […]
California Steel Industries (CSI) opened their February order book and became the first domestic mill to announce a new round of flat rolled price increases. In a letter to their customers dated December 13, 2013 the mill advised, “Due to changing market conditions, California Steel Industries is increasing transaction prices by a minimum of the […]
According to Baker Hughes data from December 13th, 2013, the U.S rig count for this week is 1,782 rigs exploring for or developing oil or natural gas. This count is an increase of 7 rigs when compared to last week, with oil rigs up 14 to 1,411 rigs, gas rigs down 6 to 369 rigs, […]
The AHRI released shipment data for heating and cooling equipment for the month of October 2013. This data is important to those in the steel industry as the equipment is made out of flat rolled steels. The data is also an important economic indicator for residential construction and growth. Residential Storage Water Heaters U.S. shipments […]
The futures market has traded in a very tight range over the past couple of weeks. Prices in the front months, December and January, have continued to firm trading around $670 per ton. The further out, the curve prices have remained backwardated as the risk of imports in the 2nd quarter onwards continues to weigh […]
We communicated with one of our main Asian contacts over the past few days. We wanted to know what they have been seeing regarding new carbon sheet price offers out of China for their European customers (this source does not ship steel to the USA). We also wanted to learn more about iron ore prices […]
Apparent steel supply for October was 9,445,160 net tons, a 12.63 percent increase compared to the same month one year ago. This was due to a large increase in domestic shipments and total imports, and a decrease in exports. The net trade balance from the difference between imports and exports was a surplus of imports […]
October ferrous scrap exports totaled 1,451,844 net tons (1,317,092 metric tons) with Turkey, Korea, Taiwan, China, and Mexico being the top five countries where scrap was sent. These countries accounted for over 74.1 percent of all scrap exports. Of the higher ranking countries in the table below, there was month-over-month increase in ferrous scrap exports […]
Total U.S. steel exports for the first 10 months of 2013 were 10,871,857 net tons (NT), a 7.69 percent decrease from the 11,777,542 NT exported for the same period in 2012. NAFTA exports decreased slightly during that time frame by 173,983 NT or 1.86 percent. U.S. exports to non-NAFTA countries within the Western Hemisphere were […]
Shipments of sheet and strip products in the first 10 months of 2013 were 29,178,320 tons, a decrease of 0.3 percent from the same period last year. Shipments in the three months August through October averaged 4,216,504 tons / month, an increase of 2.4 percent from the previous 3 months May through July and an […]
The U.S. ferrous scrap market has seen prices moving higher during the first 10 days of December. We have seen shredded scrap prices moving $20 to $45 per gross ton depending on the market. Busheling has been more plentiful and has managed to remain stable to up $10 in most markets. We asked one of […]
Total steel exports rose 10.86 percent in October over September and were at the highest levels seen since May 2013. Of the 1,133,090 net tons (NT) exported in October, 52.70 percent were sent to Canada and 36.17 percent went to Mexico. The remaining 11.12 percent went to non-NAFTA countries, with tonnage going to Brazil (1.01 […]
For the week ending December 7, 2013, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,829,000 net tons of raw steel, a 0.9 percent increase over the previous week and a 2.5 increase over the same week one year ago. The estimated capacity utilization rate is 76.3 percent, up […]