Steel imports are trending up in March as license data from the U.S. Department of Commerce shows total imports tracking towards 2.9 million net tons–above the 3-month and 12-month moving averages. Based on license data through March 19, both finished and semifinished steels (mostly slabs purchased by domestic mills) are up significantly over February levels. […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel Interestingly, this month the hot rolled spot price has been edging higher on the back of the latest mill price increase […]
December apparent steel supply was calculated at 8,971,570 net tons, according to data released late last week. Apparent steel supply is determined by adding domestic steel shipments and finished U.S. steel imports, then subtracting total U.S. steel exports. December apparent steel supply saw a 469,929 ton or 5.5 percent increase compared to the same month […]
Flat rolled prices moved a bit over the past week, while plate prices remained unchanged. Benchmark hot rolled was up $10 per ton as both the low and high end moved by $0.50/cwt. Hot rolled continues to be the weakest of the flat rolled products. The strongest are coated steels with a number of data […]
U.S. steel mills continued to raise the productivity bar, reaching an average capability utilization rate of 83.4 percent in the week ending March 9. Domestic raw steel production for the week totaled 1,941,000 net tons, up 0.7 percent from the prior week and 6.3 percent from the same period last year, reported the American Iron […]
U.S. steel exports in December totaled 519,099 net tons (470,919 metric tons), down 15.7 percent from November, and down 31.0 percent from levels one year ago. The last time total steel exports were this low was over 16 years ago, back in July 2002, when 504,621 tons of steel were exported outside of the United […]
By CRU Senior Analyst Erik Hedborg In the past week, iron ore prices continued to decline as demand in China remained weak. Steel prices continued to fall and buying activities have yet to pick up after the 13th National People’s Congress (NPC) began its annual two-week meeting on March 5. On Tuesday, March 12, CRU […]
Total raw steel production for the month of January rose to 8,286,886 net tons, reports the American Iron and Steel Institute in Washington. This is one of the higher levels seen over the last few years. Broken down by production method, 5,717,191 tons (69.0 percent) were produced by electric arc furnaces (EAFs) and 2,569,695 tons […]
As markets transition from one phase to another, the process can sometimes be “messy” until there is a clear direction as momentum shifts. Many steel buyers reported a higher sense of confidence that the market has “turned the corner” and will move higher from here. However, the feelings are not universally shared as some buyers […]
SSAB Americas notified customers today, March 7, that it intends to raise its transaction prices by a minimum of $40 per ton effective immediately for all new non-contract orders acknowledged for shipment the week of April 28 and beyond. The increase applies to As-Rolled Mill Plate, Cut-To-Length Plate >72”, Hot Rolled Coils >72”, as well […]
Gaurav Chhibbar is a partner at Metal Edge Partners, a firm engaged in Risk Management and Strategic Advisory. In this role, he and his firm design and execute risk management strategies for clients along with providing process and analytical support. In Gaurav’s previous role, he was a trader at Cargill spending time in Metal and […]
Ferrous scrap prices for March settled up $20/GT, report Steel Market Update sources. “The ferrous market was up $20 across the board without much deviation across the country. That puts Midwest shred at around $355-360 and busheling at $370-380. Export has rebounded this week by about $5-10 from recent sales. The most recent sale to Turkey […]
Foreign steel imports dropped to an eight-year low in December, coming in under 2 million net tons, according to final data released Wednesday by the U.S. Department of Commerce. Removing the 200,000 tons of semi-finished steels (mostly slabs used by domestic steel mills), finished steel imports were just under 1.7 million net tons. As shown […]
Steel Market Update did not see a huge move in flat rolled steel prices this week. Our benchmark hot rolled average rose a modest $5 per ton, but is still below $700 per ton and a long way away from the $730 per ton suggested by ArcelorMittal USA in their announcement email. The other flat […]
U.S. steel mills reached an average capability utilization rate of 82.8 percent in the week ending March 2. Domestic raw steel production for the week totaled 1,927,000 net tons, up 1.0 percent from the prior week and 5.9 percent from the same period last year. This is the highest capacity utilization rate seen in over […]
The following calculation is used by Steel Market Update to identify the theoretical spread between foreign hot rolled steel prices (delivered to U.S. ports) and domestic hot rolled coil prices (FOB domestic mills). We want our readers to be aware that this is only a “theoretical” calculation as freight costs, trader margin and other costs […]
Service center executives polled by Steel Market Update on Monday and Tuesday reported spot prices firming up, though perhaps not enough for the mills to collect both $40 increases they have announced in the past month. Below are some of their comments on the current price momentum for flat rolled and plate steel, as well […]
The following article on the hot rolled coil (HRC) futures market was written by David Feldstein. As the Flack Global Metals Chief Market Risk Officer, Dave is an active participant in the hot rolled futures market, and we believe he provides insightful commentary and trading ideas to our readers. Besides writing futures articles for Steel […]
Flat rolled steel prices have begun moving higher. Benchmark hot rolled coil (HRC), which has been one of the weakest of the flat rolled products recently, was up $10 per ton. Cold rolled did even better, up $15; galvanized better than CR, up $20; and Galvalume bested them all, up $25 per ton compared to […]
Ferrous scrap prices are expected to settle around $20/GT higher for March following weakness in January and February, report Steel Market Update sources. “The March domestic market seems to have $20/GT baked into it,” commented one dealer in the Northeast. “Poor inflows due to bad weather and seasonality, along with a stronger export market, are […]
For the week ending Feb. 23, domestic raw steel production totaled 1,907,000 net tons. The mills achieved an average capability utilization rate of 81.9 percent, up 1.1 percent from the prior week and 5.0 percent from the same period last year. The U.S. steel industry has produced 14,644,000 tons of steel so far in 2019, […]
As of Feb. 26, with the month nearly complete, U.S. steel imports were trending at less than 2.5 million tons, based on license data from the U.S. Department of Commerce. February imports are likely to finish the month well below January and below the 3- and 12-month moving averages as well. Semi-finished steels continue to […]
By CRU Analyst Jordan Permain Iron ore prices declined for the second consecutive week as the market awaits the announcement of stimulus measures in China. On Tuesday, Feb. 26, CRU has assessed the 62% Fe fines price at $84.70 /t, down $1.90 /t w/w. Steel demand has remained weak in China in the past seven […]
In the last month, there has been a positive turnaround of raw materials prices. Table 1 summarizes the price changes through February of the five materials considered in this analysis. It reports the month/month, 3 month/3 month and 12 month/12 month changes and tells us that price movements with the exception of busheling have been […]
By CRU Latin America Analyst Thais Terzian On Jan. 25, one of Vale’s tailing dams located in Brumadinho, Minas Gerais, breached. The dam was part of Vale’s Córrego do Feijão mine and its breach tragically caused the death of several hundred people. On Jan. 29, Vale announced the suspension of production at nine mines in its […]
On Wednesday morning, Nucor announced a $40 per ton ($2.00/cwt) “minimum” price increase on flat rolled steel products. The mill advised their customers the increase was to be “effective immediately.” This is the second price increase announcement out of Nucor in less than 30 days. On Jan. 28, 2019, Nucor announced a $40 per ton […]
As the domestic steel mills started raising flat rolled prices on Wednesday, Steel Market Update reached out to a number of steel buyers in order to get their reaction to the news. We discussed the $40 per ton increases announced by Nucor, NLMK USA, U.S. Steel, California Steel and USS/POSCO along with ArcelorMittal USA’s new […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel Market chatter suggests that February has been a fairly active month for HR physical steel sales as spot price indexes have pushed […]
We found mixed results in flat rolled steel prices this week. Steel buyers are telling Steel Market Update that the bottom has been “firming” and that prices are moving sideways to slightly higher on most products. SMU talks more about price momentum and pricing in a separate article in tonight’s issue. Here is how we […]
The U.S. steel industry has produced 12,737,000 tons of steel so far in 2019, an 8.4 percent increase from the same period last year. Mill utilization has averaged 80.7 percent this year, up substantially from the 75.7 percent in 2018, reported the American Iron and Steel Institute. For the week ending Feb. 16, the average […]