According to Baker Hughes data from March 28th, 2014, the U.S rig count for this week is 1,809 rigs exploring for or developing oil or natural gas. This count is an increase of 6 rigs when compared to last week, with oil rigs up 14 to 1,487 rigs, gas rigs down 8 to 318 rigs, […]
The American Iron and Steel Institute (AISI) today lauded the decision by the World Trade Organization (WTO) to side with the U.S. on a challenge to China’s export restrictions on rare earth elements, tungsten and molybdenum. Rare earths and other products are used in smartphones, automobiles, the defense industry, and wind turbines and are mined […]
The American Iron & Steel Institute (AISI) reported their final raw steel production numbers for the month of February 2014. This estimation is different than the weekly raw steel production as it is based on 75 percent of the domestic mills reporting vs. 50 percent for the weekly estimates. Total raw steel production for the […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S remained negative this week for the 9th consecutive week after being in positive territory for the prior 15 weeks. MoMo, a trailing indicator, is measured as a percentage and shows the relation of the current hot rolled coil (HRC) price movements […]
Reasons: The first reason being the limited number of buyers who admitted they had actually placed any tonnage since the flat rolled price increases were announced. Second, was the vast difference between northern fully integrated mills, mini-mills and conversion mill spot pricing. We need to remember all three groups are part of our index and […]
Details on steel trade data out of China were released earlier this week on iron ore imports, steel scrap imports, and flat rolled steel imports and exports. Chinese imports of iron ore in February were 61,240,000 metric tons (MT), a decrease of 29.6 percent from the previous month but an increase of 8.5 percent from […]
For the week ending March 22, 2014, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,885,000 net tons (NT) of raw steel, the highest production level since early-August 2013. This week’s production is a 3.2 percent increase over the previous week and a 3.2 percent increase over the same […]
According to Baker Hughes data from March 21st, 2014, the U.S rig count for this week is 1,803 rigs exploring for or developing oil or natural gas. This count is a decrease of 6 rigs when compared to last week, with oil rigs up 12 to 1,473 rigs, gas rigs down 18 to 326 rigs, […]
In our Thursday evening issue, we published an article regarding recent price increase announcements out of Nucor, California Steel Industries (CSI), and AK Steel. We incorrectly stated the increase out of CSI as $40.00/cwt for all products, when it was really a $40 per ton increase. We apologize for the error. The image below is […]
Yesterday (Wednesday the 19th) Nucor announced a price increase on their new orders and listed base prices of $33.00/cwt on hot rolled, $39.50/cwt on cold rolled, and $39.50/cwt on galvanized. These are the same levels that ArcelorMittal, NLMK USA, and Severstal announced earlier in the week. California Steel Industries (CSI) also announced an increase on […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S remained negative this week for the 8th consecutive week after being in positive territory for the prior 15 weeks. MoMo, a trailing indicator, is measured as a percentage and shows the relation of the current hot rolled coil (HRC) price movements […]
Based on the most recent MSCI flat rolled steel data Steel Market Update has calculated that U.S. service centers dwindled their “Excess” inventories from +150,000 tons at the end of January to +28,000 tons at the end of February. Our forecast from last month was for service center excess to drop to +80,900 tons. So, […]
In an email sent late in the afternoon on Monday, March 17th, ArcelorMittal USA announced a price increase on all of their new flat rolled orders, with specific base prices at $33.00 for hot rolled, $39.50 for cold rolled, and $39.50 for galvanized. The mill justified their increase by stating “Despite the recent drop in […]
There are always reasons behind the domestic steel mills’ attempt to push flat rolled steel prices. One of the reasons, and the one we believe is being exercised by those mills who have already made price announcements, is prices have moved too low too fast. Based on Steel Market Update data, benchmark hot rolled coil […]
Canadian steel service center shipments for all steel products were reported at 448,500 net tons (NT) in February, down 9.4 percent over January figures and down 3.2 percent from February 2013 shipments. With 20 shipping days in February, daily shipments are calculated to have been 22,400 tons per day, down from 22,500 tons per day […]
For the week ending March 15, 2014, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,828,000 net tons (NT) of raw steel, a 0.7 percent decrease over the previous week but a 0.1 percent increase over the same week one year ago. The estimated capacity utilization rate is 76.0 […]
According to Baker Hughes data from March 14th, 2014, the U.S rig count for this week is 1,809 rigs exploring for or developing oil or natural gas. This count is an increase of 17 rigs when compared to last week, with oil rigs up 18 to 1,461 rigs, gas rigs down 1 to 344 rigs, […]
The The Air-Conditioning, Heating, and Refrigeration Institute (AHRI) released January shipment data for water heaters, furnaces and air conditioners. Residential Storage Water Heaters U.S. shipments of residential gas storage water heaters for January 2014 increased 2.2 percent, to 370,850 units, up from 363,004 units shipped in January 2013. Residential electric storage water heater shipments increased 7.3 […]
January prepainted flat rolled steel imports increased over both the previous month and the same month one year prior. The four prepainted products tracked by Steel Market Update rose a combined 18,188 net tons (NT) or 86.6 percent over the previous month and were up 16,236 NT or 70.7 percent over January 2013 tonnage. In […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S remained negative this week for the 7th consecutive week after being in positive territory for the prior 15 weeks. MoMo, a trailing indicator, is measured as a percentage and shows the relation of the current hot rolled coil (HRC) price movements […]
Total January 2014 US steel exports were 963,060 net tons (NT), a 10.5 percent increase over December 2013 figures but down 10.6 percent compared to January 2013. Total exports in January were above the three month moving average but below the twelve month moving average. The top countries receiving US exports were Canada at 54.8 […]
Apparent steel supply for January was 9,386,260 net tons, a 1.1 percent increase compared to the same month one year ago. Although steel imports were up and exports decreased over these periods, the decrease in domestic shipments negated any big changes in total apparent supply. The net trade balance between steel imports and exports was […]
For the week ending March 8, 2014, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,840,000 net tons (NT) of raw steel, a 1.1 percent decrease over the previous week and a 0.7 percent decrease over the same week one year ago. The estimated capacity utilization rate is 76.5 […]
Zinc and aluminum prices are something to keep an eye on when you’re involved with coated products such as galvanized or Galvalume steels. At current zinc price levels, the amount of zinc needed to coat 0.060″ thick G90 coil costs approximately $1.98 per cwt (based on zinc calculation shared with SMU from a domestic coating […]
Total steel imports in January were 3,205,246 net tons (NT), the highest levels Steel Market Update has recorded since we began keeping track of monthly import data in mid-2009. January tonnage is a 27.9 percent increase over December figures and well above both the three month moving average (3MMA) and twelve month moving average (12MMA). […]
According to Baker Hughes data from March 7th, 2014, the U.S rig count for this week is 1,792 rigs exploring for or developing oil or natural gas. This count is an increase of 23 rigs when compared to last week, with oil rigs up 13 to 1,443 rigs, gas rigs up 10 to 345 rigs, […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S remained negative this week for the 6th consecutive week after being in positive territory for the prior 15 weeks. MoMo, a trailing indicator, is measured as a percentage and shows the relation of the current hot rolled coil (HRC) price movements […]
Steel prices were flat to slightly lower this week based on direct contact with buyers and our ongoing flat rolled steel market survey results. Here is how we are seeing prices this week: Hot Rolled Coil: SMU Range is $620-$650 per ton ($31.00/cwt- $32.50/cwt) with an average of $635 per ton ($31.75/cwt) FOB mill, east […]
For the week ending March 1, 2014, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,861,000 net tons (NT) of raw steel, the highest production level since the week of October 5, 2013. The latest production figure is a 1.6 percent increase over the previous week but a 0.7 […]
Steel Market Update (SMU) began collecting responses for the mid-February flat rolled steel market survey during the week of February 17th. Even with weather related issues being felt around the country, our Buyers Sentiment Index was measured at a robust +39 at that time. That result was one point lower than from our last measurement […]