For the week ending June 7, 2014, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,845,000 net tons (NT) of raw steel, a 2.6 percent decrease over the previous week but a 1.2 percent increase over the same week one year ago. The estimated capacity utilization rate is 76.7 […]
The U.S. Department of Commerce released final census data regarding exports of steel out of the U.S. steel mills this past week. According to the US DOC data, the domestic mills exported a total of 1,079,723 net tons of steel products during the month of April 2014. This is in line with the previous two […]
The U.S. steel mills exported 1 million tons of steel during the month of April. This is within the 12 month moving average and only slightly higher than the 1,041,387 net tons shipped in April 2013. During the same month (April 2014) foreign imports rose by 999,557 net tons compared to the same period one […]
Apparent steel supply for April was 9,925,287 net tons, the highest figure Steel Market Update has in its recorded history beginning in January 2010. April supply represents an 831,098 ton or 9.1 percent increase compared to the same month one year ago. This is primarily due to the massive spike in April imports, up 36.5 […]
According to Baker Hughes data from June 6th, 2014, the U.S rig count for this week is 1,860 rigs exploring for or developing oil or natural gas. This count is a decrease of 6 rigs when compared to last week, with oil rigs unchanged at 1,536 rigs, gas rigs down 6 to 320 rigs, and […]
The past few weeks have been dire for the futures market in terms of volumes or price volatility. While the physical market has peaked for now, the futures market remains in a strong backwardation with prices for second half the year and calendar year 2015 stuck between 620-630 per ton. While the global picture, particularly […]
Steel inputs were steady to down during the month of May. Scrap prices declined $18 to $3 per ton while iron ore prices were down $20.60 to $13.60 per ton. Zinc and Aluminum prices showed a slight increased of $0.0105 to $0.0074 per pound.
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S was positive this week for the 9th week in a row after being in negative territory for the prior 10 weeks. MoMo, a trailing indicator, is measured as a percentage and shows the relation of the current hot rolled coil (HRC) […]
Steel prices are starting to slip. We have found a number of mills making price adjustments to their flat rolled steel offers over the past 24-48 hours. The steel mills are attempting to keep the reductions as minimal and quiet as possible. We are posting reductions in our averages, most occurring due to reductions on […]
For the week ending May 31, 2014, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,895,000 net tons (NT) of raw steel, 1.1 percent increase over the previous week and a 3.4 percent increase over the same week one year ago. The estimated capacity utilization rate is 78.8 percent, […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered at present is thirty five, the Chicago Fed Mid-West Manufacturing Index is still on hold to enable the staff to complete a major re-vamp of the […]
According to Baker Hughes data from May 30th, 2014, the U.S rig count for this week is 1,866 rigs exploring for or developing oil or natural gas. This count is an increase of 9 rigs when compared to last week, with oil rigs up 8 to 1,536 rigs, gas rigs up 1 to 326 rigs, […]
The American Iron & Steel Institute (AISI) reported their final raw steel production numbers for the month of April 2014. This estimation is different than the weekly raw steel production as it is based on 75 percent of the domestic mills reporting vs. 50 percent for the weekly estimates. Total raw steel production for the […]
The American Iron & Steel Institute (AISI) reported their final raw steel production numbers for the month of April 2014. This estimation is different than the weekly raw steel production as it is based on 75 percent of the domestic mills reporting vs. 50 percent for the weekly estimates. Total raw steel production for the […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S was positive this week for the 8th week in a row after being in negative territory for the prior 10 weeks. MoMo, a trailing indicator, is measured as a percentage and shows the relation of the current hot rolled coil (HRC) […]
According to Baker Hughes data from May 23rd, 2014, the U.S rig count for this week is 1,857 rigs exploring for or developing oil or natural gas. This count is a decrease of 4 rigs when compared to last week, with oil rigs down 3 to 1,528 rigs, gas rigs down 1 to 325 rigs, […]
For the week ending May 24, 2014, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,875,000 net tons (NT) of raw steel, 2.0 percent increase over the previous week and a 2.3 percent increase over the same week one year ago. The estimated capacity utilization rate is 78.0 percent, […]
Chinese steel trade data for April 2014 was released earlier this week, providing updated data on iron ore imports, steel scrap imports, and flat rolled imports and exports. Chinese imports of iron ore in April were 83,390,000 metric tons, an increase of 12.8 percent from the previous month and an increase of 24.2 percent from […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S was positive this week for the 7th week in a row after being in negative territory for the prior 10 weeks. However, the Index dropped 2.06 percent in one week after dropping 0.54 percent the week prior. MoMo, a trailing indicator, […]
Every month, Steel Market Update calculates whether flat rolled steel distributor’s inventories are in excess or a deficit based on our proprietary formula. The Metal Service Center Institute released April data late last week and, based on our analysis, we believe the “apparent deficit” to be 251,000 tons. This represents an improvement of 101,000 tons […]
Even though there might be an air of expectation that flat rolled steel prices are going to drop, Steel Market Update continues to see a stingy domestic steel industry. Stingy in that they are not quick to give back the gains made over the past eight weeks. SMU noticed that Platts actually moved their hot […]
For the week ending May 17, 2014, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,838,000 net tons (NT) of raw steel, a 0.3 percent decrease over the previous week but a 0.3 percent increase over the same week one year ago. The estimated capacity utilization rate is 76.4 […]
The U.S. Department of Commerce released updated import license data through the 20th of May. If we remember, the license data through the 13th projected that we would see May imports surpass 4.0 million net tons and could go as high as 4.5 million tons. We discounted that number as we have seen previous month’s […]
US steel service centers shipments for all steel products during the month of April were 3,087,300 net tons, an increase of 3.6 percent from the March shipments, and an increase of 4.9 percent from April 2013 levels. Steel inventories at the end of the month were 8,617,500 tons, an increase of 4.3 percent from the […]
Canadian steel service center shipments for all steel products during the month of April were 496,300 net tons, a decrease of 0.7 percent from the month before, and a decrease of 5.6 percent from April 2013. Inventories at the end of the month stood at 1,431,800 tons, a decrease of 2.7 percent from last month, […]
According to Baker Hughes data from May 16th, 2014, the U.S rig count for this week is 1,861 rigs exploring for or developing oil or natural gas. This count is an increase of 6 rigs when compared to last week, with oil rigs up 3 to 1,531 rigs, gas rigs up 3 to 326 rigs, […]
SteelBenchmarker released regional pricing earlier this week, putting the world export hot rolled price at $501 per net ton ($552 per metric ton). The spread between the SMU HR price and the world HR price went from $173 per ton two weeks ago to $184 as of Monday. With an estimated $70 per ton in […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S was positive this week for the 6th week in a row after being in negative territory for the prior 10 weeks. MoMo, a trailing indicator, is measured as a percentage and shows the relation of the current hot rolled coil (HRC) […]
Shipments of heating and cooling equipment, a benchmark for residential construction as well as the home improvement segments of the industry, have made significant improvements in the shipping rates compared to the same month one year ago. Below is the press release from the The Air-Conditioning, Heating, and Refrigeration Institute on heating and cooling equipment […]
U.S. and Canadian steel mills continue to keep a firm grip on pricing as supply (production) related problems keep lead times extended on most products. We are seeing the impact of foreign galvanized and Galvalume imports influencing at least one coated steel mill in the South. Domestic buyers appear to be accepting the higher prices […]