For the week ending October 5, 2013, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,873,000 net tons of raw steel, a 1.1 percent increase over the previous week and a 9.6 increase over the same week one year ago. The estimated capacity utilization rate is 78.2 percent, up […]
CHARLOTTE, N.C., Oct. 7, 2013 — Nucor Corporation NUE +0.08% announced that The Steel Manufacturers Association (SMA) presented Nucor’s Executive Chairman Dan DiMicco with its Iverson-Selig award, recognizing his outstanding contributions to the minimill steel industry. The award is named after Nucor’s founder Ken Iverson and Marvin Selig, founder of CMC Steel, who were two […]
According to Baker Hughes data from October 4th, 2013, the U.S rig count for this week is 1,756 rigs exploring for or developing oil or natural gas. This count is an increase of 12 rigs when compared to last week, with oil rigs up 10 to 1,372 rigs, gas rigs up 2 to 378 rigs, […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S. remained negative this week for the 3rd week after 15 consecutive weeks in positive territory. MoMo, a trailing indicator, is based upon the current hot rolled coil price weighed against the previous 12-week average spot price as recorded by Steel Market […]
For the week ending September 28, 2013, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,852,000 net tons of raw steel, a 1.3 percent decrease over the previous week but a 5.8 increase over the same week one year ago. The estimated capacity utilization rate is 77.3 percent, down […]
The American Iron & Steel Institute (AISI) reported their final raw steel production numbers for the month of August 2013. This estimation is different than the weekly raw steel production as it is based on 75 percent of the domestic mills reporting vs. 50 percent for the weekly estimates. Total raw steel production for the […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S. remained negative this week for the 2nd week after 15 consecutive weeks in positive territory. MoMo, a trailing indicator, is based upon the current hot rolled coil price weighed against the previous 12-week average spot price as recorded by Steel Market […]
For the week ending September 21, 2013, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,877,000 net tons of raw steel, a 1.8 percent increase over the previous week and a 7.2 increase over the same week one year ago. The estimated capacity utilization rate is 78.3 percent, up […]
According to Baker Hughes data from September 20th, 2013, the U.S rig count for this week is 1,761 rigs exploring for or developing oil or natural gas. This count is a decrease of 7 rigs when compared to last week, with oil rigs up 8 to 1,369 rigs, gas rigs down 15 to 386 rigs, […]
Prices this week are slightly lower over what we saw last week. For all of the companies below, prices fell or remained steady for all four products followed. We saw slight movement from $10 per ton lower or no change at all. Benchmark hot rolled prices range from $635 to $645 per ton (average $640.50 […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S. turned negative this week after 15 consecutive weeks in positive territory. MoMo, a trailing indicator, is based upon the current hot rolled coil price weighed against the previous 12-week average spot price as recorded by Steel Market Update. MoMo was measured […]
Increasing demand for design services fueling recovery for construction industry The Architecture Billings Index (ABI) showed more acceleration in the growth of design activity nationally. As a leading economic indicator of construction activity, the ABI reflects the approximate nine to twelve month lead time between architecture billings and construction spending. The American Institute of Architects […]
Canadian shipments for all steel products in the month of August were 478,700 net tons, an increase of 4.2 percent from the month before but a decrease of 6.8 percent from August 2012. Inventories at the end of the month stood at 1,388,800 tons, a decrease of 5.0 percent from last month and a decrease […]
For the week ending September 14, 2013, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,843,000 net tons of raw steel, a 1.5 percent decrease over the previous week but a 5.3 increase over the same week one year ago. The estimated capacity utilization rate is 76.9 percent, down […]
Residential Storage Water Heaters U.S. shipments of residential gas storage water heaters for July 2013 increased 14.1 percent, to 296,623 units, up from 260,065 units shipped in July 2012. Residential electric storage water heater shipments increased 11.2 percent in July 2013, to 286,013 units, up from 257,290 units shipped in July 2012. For the […]
According to Baker Hughes data from September 13th, 2013, the U.S rig count for this week is 1,768 rigs exploring for or developing oil or natural gas. This count is an increase of 1 rig when compared to last week, with oil rigs down 4 to 1,361 rigs, gas rigs up 7 to 401 rigs, […]
WASHINGTON, D.C., September 11, 2013 – Four key trade associations representing the steel stud industry have joined together to promote the use of cold-formed steel framing in construction. Representatives from the Steel Stud Manufacturers Association (SSMA); the Steel Framing Industry Association (SFIA); the Certified Steel Stud Association (CSSA); and the Steel Market Development Institute (SMDI), […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S. remained in positive territory this week for the 15th consecutive week. MoMo, a trailing indicator, is based upon the current hot rolled coil price weighed against the previous 12-week average spot price as recorded by Steel Market Update. MoMo was measured […]
For the week ending September 7, 2013, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,872,000 net tons of raw steel, a 0.9 percent increase over the previous week and a 6.9 increase over the same week one year ago. The estimated capacity utilization rate is 78.1 percent, up […]
Prepainted flat rolled imports moderately increased in July over June for all products with the exception of prepainted cold-rolled sheet and strip. Compared to the same month one year ago, this month’s prepainted imports slightly decreased for all products with the exception of prepainted electro-galvanized sheet and strip. As you can see by our […]
Apparent steel supply for July was up slightly compared to the same month one year ago by 1.53 percent. This is due to a 4.60 percent increase in domestic shipments, which was offset by a decrease in both total steel imports and finished steel imports, down 9.24 percent and 9.92 percent respectively. The net trade […]
July ferrous scrap exports totaled 1,203,282 metric tons (1,326,390 net tons) with Turkey, Taiwan, China, Mexico, and Canada being the top five importing countries of U.S. scrap. Of the higher ranking countries in the table below, there was month-over-month increase in exports going to Turkey, China, Mexico, Canada, and Indonesia over the June figures, but […]
According to Baker Hughes data from September 6th, 2013, the U.S rig count for this week is 1,767 rigs exploring for or developing oil or natural gas. This count is a decrease of 9 rigs when compared to last week, with oil rigs down 23 to 1,365 rigs, gas rigs up 14 to 394 rigs, […]
The Global PMI composite index increased to 51.7 for the month of August, up from the 50.8 reading in July. This slight yet meaningful increase marks the eighth consecutive month of expansion in the manufacturing sector. Manufacturing production increased for the tenth consecutive month, with the rate of growth at the highest level recorded since […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S. remained in positive territory this week for the 14th consecutive week. MoMo, a trailing indicator, is based upon the current hot rolled coil price weighed against the previous 12 week average spot price as recorded by Steel Market Update. MoMo […]
The American Iron & Steel Institute (AISI) reported estimated raw steel production at 1,871,000 net tons for the week ending July 27, 2013. With outages and maintenance issues, production declined through August to a high of 1,888,000 net tons of raw steel in the week ending August 3, and dropping down to 1,856,000 net tons […]
For the week ending August 31, 2013, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,856,000 net tons of raw steel, a 0.3 percent decrease over the previous week and a 2.2 decrease over the same week one year ago. The estimated capacity utilization rate is 77.5 percent, down […]
According to Baker Hughes data from August 30th, 2013, the U.S rig count for this week is 1,776 rigs exploring for or developing oil or natural gas. This number is unchanged when compared to last week, with oil rigs up 6 to 1,388 rigs, gas rigs down 7 to 380 rigs, and miscellaneous rigs up […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S. remained in positive territory this week for the 13th consecutive week. MoMo, a trailing indicator, is based upon the current hot rolled coil price weighed against the previous 12 week average spot price as recorded by Steel Market Update. MoMo […]
The American Iron & Steel Institute (AISI) reported their final raw steel production numbers for the month of July 2013. This estimation is different than the weekly raw steel production as it is based on 75 percent of the domestic mills reporting vs. 50 percent for the weekly estimates. Total raw steel production for the […]