Since late June, the nation’s steelmakers have raised prices three times on flat rolled and twice on plate products, managing to reverse the 40 percent decline in steel prices that began last summer. Steel prices have increased more than 12 percent since bottoming in early July. The mills have seized the momentum heading into the […]
By CRU Analyst Alexander Ordosch Last week, Turkish scrap prices declined slightly by $4 /t w/w to $290 /t CFR for HMS 80:20, based on one 40 kt deal from the U.S. The Turkish market remains quiet because of the Eid al-Adha (Festival of the Sacrifice) holidays this past week. We consider this new price level of around $285-290 /t […]
By CRU Principal Analyst Josh Spoores U.S. Steel recently announced its intent to withdraw from spot market-linked adjustable price contracts in 2020 (i.e. contracts where the price moves with the spot market in some way). The following offers insight on the use of such contracts and what may come about if the intended change is […]
By Chris Houlden, CRU Research Manager For the last 40 years, CRU has provided its U.S. Midwest HR coil (HRC) price, or The CRU as it is sometimes called, to the market. We have done this with the sole focus of faithfully reflecting the spot market and with the clear understanding that the market would […]
Noting that “strict enforcement of U.S. trade law is a primary focus of the Trump administration,” the Commerce Department announced its 21st anticircumvention inquiry Wednesday, notable as the first self-initiated by the government without a complaint from the domestic industry. Commerce will be looking into possible circumvention involving exports of certain corrosion-resistant steel products (CORE) […]
By CRU Senior Analyst Helen O’Cleary Zinc’s price has been testing long-term support in the low $2,220s in recent days and has come under pressure on both the LME and ShFE. Zinc’s price on the LME hit a year-to-date low of $2,248.5/t on Aug. 12 and has lost 24 percent of its value since the […]
U.S. Steel is planning a fundamental change in the way it goes to market, informing its salesforce this week that it will no longer use index-based pricing effective with its 2020 contracts. Should other mills follow suit, the move has wide-ranging implications for steel prices and the way contracts are negotiated. In an Aug. 13 […]
U.S. Steel is planning a fundamental change in the way it goes to market, informing its salesforce this week that it will no longer use index-based pricing effective with its 2020 contracts. Should other mills follow suit, the move has wide-ranging implications for steel prices and the way contracts are negotiated. In an Aug. 13 […]
As with any mill announcement, be it price, changes in production or in the case of the U.S. Steel’s announcement about how they are going to handle contracts going forward, there are always mixed opinions from steel buyers and from the other steel mills. This afternoon, Steel Market Update, as an index provider, spent a […]
As with any mill announcement, be it price, changes in production or in the case of the U.S. Steel’s announcement about how they are going to handle contracts going forward, there are always mixed opinions from steel buyers and from the other steel mills. This afternoon, Steel Market Update, as an index provider, spent a […]
North America’s plate mills have announced their second round of price increases in less than three weeks, seeking another $40 per ton ($2/cwt). Nucor’s Plate Mill Group was the first to inform customers of the change on Friday, prompting similar announcements by most other mills on Monday. SSAB Americas advised customers it is increasing transaction […]
After a month of small increases, steel mill capacity utilization dipped last week to 80.2 percent. The mills have still kept production above the benchmark 80 percent level for the past five weeks, since the week ending July 6. Raw steel production for the week ending Aug. 10 totaled 1,867,000 net tons, a decrease of […]
Tariffs on some of the $300 billion in Chinese goods due to take effect on Sept. 1 have been pushed back until Dec. 15, and some items are likely to be removed from the tariff list entirely, as the Trump administration faces opposition from U.S. companies that claim the duties are hurting their businesses, The […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: Last week, the Department of Commerce, for the first time, initiated an investigation into “circumvention” of antidumping and countervailing duty orders (AD/CVD) on corrosion-resistant steel (CORE) from Taiwan and China. This follows determinations on CORE from Korea, Taiwan […]
Steel prices are up, but the same cannot be said for industry optimism. Following a brief uptick shortly after the mill price increases were announced last month, Steel Market Update’s Steel Buyers Sentiment Index has ticked back down. Steel buyers’ comments suggest that concerns about the economy, steel demand and the staying power of the higher […]
Nucor’s Plate Mill Group informed customers on Friday that it is raising the price of carbon, alloy and heat-treated plate by $40 per ton ($2/cwt), effective immediately on all new and unconfirmed orders. This is Nucor’s second price hike on plate products in the past two weeks, following on a $40 increase July 26. Steel […]
The mills may have the momentum today, but three out of four buyers responding to Steel Market Update’s market trends questionnaire this week expect that pricing push to be short-lived. About 73 percent said they expect steel prices to drop in the fourth quarter. Another 11 percent said they are not paying higher spot prices […]
For a steel industry that is hoping to collect higher prices on flat rolled and plate products, the mills seem surprisingly willing to negotiate, according to the findings from Steel Market Update’s latest market trends questionnaire. Well, then again, when you announce $120 per ton of base price increases (or more, depending on what your […]
Lead times for steel delivery are slightly longer for hot rolled, galvanized and plate steels following price increases announced by the major mills. The average lead time for hot rolled is now approaching four and a half weeks, cold rolled nearly six weeks, and coated steels around six and a half weeks. Plate lead times […]
Russel Metals, Inc., Canada’s second largest metals distributor, reported revenues of $937 million in the second quarter. Net income totaled $31 million, about half the $66 million the company earned in the same quarter last year (figures are in Canadian dollars). The company’s gross margins in this year’s second quarter averaged 18.8 percent, well below […]
Mill Steel Co. has added three veteran executives to the sales team at its Mill Steel Framing operation. The Grand Rapids, Mich.-based distributor of carbon flat-rolled steel has appointed Kip Craddick as Vice President of Mill Steel Framing, Steve McDaniel as Director of Mill Steel Framing, and Brett Patton as Senior Account Manager. Together, the […]
Steel Market Update sources report that ferrous scrap prices have turned around after repeated declines in the first half of the year and are settling up $20/GT for August, lending support to recent price increases on finished steel. “Demand is about the same for August as it was in July, there is just a little […]
Steel mill capacity utilization has been inching upward for the past month and registered 81.5 percent in the week ending Aug. 3 as the domestic mills benefit from higher steel prices. The last time the mills operated at this rate was mid-May. Raw steel production for the week ending Aug. 3 totaled 1,897,000 net tons, […]
Distributors of galvanized steel to the HVAC sector are paying higher prices to their suppliers, but having difficulty collecting the increase from their contractor customers, reported members of the Heating, Air Conditioning & Refrigeration Distributors International during their monthly conference call earlier today. Since HARDI’s last call, domestic flat rolled mills have announced three price […]
Distributors of galvanized steel to the HVAC sector are paying higher prices to their suppliers, but having difficulty collecting the increase from their contractor customers, reported members of the Heating, Air Conditioning & Refrigeration Distributors International during their monthly conference call earlier today. Since HARDI’s last call, domestic flat rolled mills have announced three price […]
Demand for HVAC products remains relatively strong in an otherwise lukewarm steel market, but members of the Heating, Air Conditioning & Refrigeration Distributors International (HARDI) say they are challenged by declining galvanized steel prices and rising intensity from the competition. Polled six weeks ago, nearly all the HARDI members expected galvanized steel prices to stay […]
Distributors of galvanized steel to the HVAC industry remain surprisingly positive despite steel prices that have been on the decline for more than six months. While there is some variance by region and market segment, members of the Heating, Air Conditioning & Refrigeration Distributors International generally expect solid demand for their products at least through […]
By CRU Analyst Michelle Liu Rising trade tensions between the U.S. and China have driven one of the largest w/w falls in iron ore prices, a drop of $21 /t w/w to $98 /t. The U.S. president’s threat of imposing 10 percent tariffs on the remaining $300 billion worth of Chinese imports last Friday has escalated trade […]
By Josh Spoores, CRU Principal Analyst Sheet prices have continued to rise, but the bullish trend is clearly fading. Overall volume of spot transactions last week was the lowest recorded all year. Furthermore, manufacturing is now in recession based on the last two quarters of IP activity, while recent PMI data shows weakness in new […]
By CRU Analyst Alexander Ordosch On Friday, Aug. 2, the U.S. government announced 10 percent tariffs on an additional $300 billion in Chinese imports that are not already covered by Section 301 (S301) tariffs. About 50 percent of the new tariffs cover steel-bearing machinery, while the rest are non-steel-containing items such as food, clothing, base metals […]