Steel Mills
HARDI: Business is Good, But Pricing’s Uncertain
Written by Tim Triplett
September 19, 2017
Despite recent price increase announcements from major domestic mills and imports that are trending lower, wholesalers and distributors who sell galvanized steel products to the HVAC market don’t expect much change in lead times or pricing until there’s some resolution to the Section 232 and Vietnam circumvention trade actions pending in Washington.
In the monthly steel conference call hosted today by the Heating, Air-conditioning, and Refrigeration Distributors International, HARDI members reported generally strong demand for their products and balanced inventory levels. Lead times remain short, and mills remain willing to negotiate, they said.
Anticipation of Section 232 is propping up the market, observed one wholesaler. “I feel that’s what’s holding up prices. It seems like there is a lot of fragility to the market now. If there is no action on 232 and imports pick up, I’m concerned about where the market [prices] could go.”
Galvanized imports topped 200,000 tons in August for the fifth month in a row, though they have trended down in September. Trade action could quickly accelerate that downtrend, said another HARDI member, expressing the opposite concern. “We could see a massive falloff in imports. I don’t think the market is ready for the numbers they are going to see in September, and even lower in October and November.”
John Packard, president and publisher of Steel Market Update (SMU), noted there are groups that strongly favor and those that strongly oppose Section 232, which would restrict steel imports on national security grounds. “There is a political struggle over Section 232 that will probably last through the end of this year,” he said. A preliminary ruling in the circumvention case, in which Chinese steelmakers are accused of transshipping flat roll through Vietnam to circumvent U.S. duties, is expected soon.
In the meantime, HARDI members may see their price for coated steel increase due to a bump in the coating extras. The price of zinc has topped $1.40 per pound, prompting NLMK, California Steel Industries, USS-Posco and AK Steel to raise their zinc upcharge by 10 percent. Other major mills have not yet followed suit, including U.S. Steel, Nucor, ArcelorMittal and SDI. “We have a split market. We’ll have to wait and see how it goes,” said Packard. “Others may be waiting for the bigger mills to make their announcements.”
Overall, mill capacity utilization rates are stubbornly stuck in the 75 percent range, despite the favorable demand. But the mills are producing coated steel at closer to a 90 percent rate, noted another HARDI member. “They don’t have much more room to flip a switch and increase production today. If they do, they will have to pay up for their zinc.”
Most HARDI members reported inventory levels that are well matched to current demand. Stock levels industry wide are unclear, however. MSCI estimates flat roll inventories at around 2 months of supply. SMU places levels higher at 2.72 months. “There’s a big disconnect between what I am measuring and what MSCI is measuring,” Packard said. “I am seeing inventories as being fairly healthy, which means you are probably seeing competitive pressures from nontraditional service centers.” SMU is in the process of expanding its inventory data collection and analysis, he added.
HARDI members reported relatively minor effects from hurricane damage in Texas and the Southeast. “It has impacted trucking more than anything else,” said one. “In terms of infrastructure and the steel market, it could have been a lot worse, particularly in Houston, where most service centers were spared.”
Galvanized steel prices have seen little change in the past two and a half months, leaving wholesalers to ponder which direction they will eventually move. “There seems to be a lot of noise out there, whether it be caused by the zinc extras or Section 232. Lead times are still short. We all recognize the [recent mill price] increases aren’t likely to stick unless those lead times pop out,” concluded another HVAC wholesaler.
Steel Market Update participates in a monthly steel conference call hosted by HARDI. The call is dedicated to a better understanding of the galvanized steel market. The participants are HARDI member companies who are wholesalers, service centers and manufacturing companies that either buy or sell galvanized sheet products used in the HVAC industry.
Written by Tim Triplett, Tim@SteelMarketUpdate.com
Tim Triplett
Read more from Tim TriplettLatest in Steel Mills
AM/NS Calvert to produce electrical steel with IRA funding
After receiving a hefty federal tax credit, the AM/NS Calvert mill plans to move into the production of non-grain oriented electrical steel (NOES).
Nucor taps Theophilus for new HR role
Nucor has appointed Nicole B. Theophilus to the newly created position of EVP of talent and human resources, effective April 29.
Former JSW Steel USA CEO to join AM/NS Calvert
Steel industry veteran Mark Bush announced he will be joining AM/NS Calvert as area manager steelmaking.
U.S. Steel taking 45-day outage on Gary Works’ BF4
U.S. Steel’s No. 8 blast furnace (BF8) at its Gary Works in northwest Indiana is undergoing a 45-day maintenance outage that started on April 4.
USS shareholders vote in favor of Nippon merger
U.S. Steel Corp.’s impending sale to Japan’s Nippon Steel Corp. (NSC) has cleared one hurdle: USS stockholders voted overwhelmingly in favor of the nearly $15 billion merger.