Monthly Key Market Indicators, as analyzed by Steel Market Update, continued their shift to a neutral position over the past month with positive indicators eroding further, slipping for the sixth successive month. What began as a typical summer slowdown, worsened by a surge in Delta cases and a less-than-ideal job market, has been compounded by […]
The Associated General Contractors of America (AGC) together with two of its chapters, the Dallas-based TEXO chapter and the statewide AGC of Texas chapter, filed suit earlier this week in federal court to block the Biden administration’s effort to impose a COVID-19 vaccine mandate on federal contractors and subcontractors. According to the suit, the groups […]
Nucor Corp. expects earnings this quarter to be the highest in the company’s history, surpassing the previous quarterly record of $7.28 per diluted share in the third quarter of 2021. The Charlotte, N.C.-based steelmaker predicted fourth-quarter earnings would be in the range of $7.65 to $7.75 per share. “Steel mill segment earnings in the fourth quarter of 2021 remain robust and […]
Producer prices expanded 1.4% in November, seasonally unadjusted, climbing consecutively since reaching the most recent bottom 20 months ago, reports the U.S. Labor Department. Persistently high prices in large part continue to reflect clogged supply chains, as manufacturers scramble to keep up with unusually strong consumer demand. The Labor Department said that its Producer Price Index […]
Steel Technologies, Louisville, Ky., has agreed to purchase the assets of Calstrip Industries, Inc., expanding Steel Technologies’ North American steel processing platform to 31 facilities, including joint-venture operations, located throughout the United States, Canada and Mexico. The transaction is expected to close late this month. Calstrip – a flat-rolled processor with operations in California, New […]
The 33rd Tampa Steel Conference will be live and in-person as we return to the Marriott Water Street Hotel in Tampa, Fla. The conference dates are Feb. 14 (networking opportunities and first day of Introduction to Hedging Workshop), Feb. 15 (golf outing, boat tour, and hedging workshop in the morning followed by the beginning of the […]
The 33rd Tampa Steel Conference will be live and in-person as we return to the Marriott Water Street Hotel in Tampa, Fla. The conference dates are Feb. 14 (networking opportunities and first day of Introduction to Hedging Workshop), Feb. 15 (golf outing, boat tour, and hedging workshop in the morning followed by the beginning of the […]
Nucor Corp. plans to build a new, $350 million rebar “micro mill” in the South Atlantic region of the U.S. The new mill is expected to have capacity of 430,000 tons per year, the Charlotte, N.C.-based steelmaker said. “We have recently executed two successful rebar micro mill start-ups and believe the East Coast market will be in […]
The Dodge Momentum Index contracted in November following a 10.0% expansion the month prior. The index registered 171.7 in November, a 4.0% decline against the revised October reading of 178.1, according to data and analytics from the Dodge Construction Network. The value of nonresidential building projects continues to move in a sawtooth pattern, alternating between […]
Total construction spending edged higher in October, as gains in public and private project types outmatched decreases in single- and multifamily residential outlays, reported the Associated General Contractors of America (AGC). Public sector investments would likely rise in the near future as a result of the recently-passed infrastructure bill, according to the AGC, but they […]
The U.S. construction sector saw 31,000 new employees added to payrolls in November. Even though nonresidential construction firms added workers for a third straight month, the sector’s unemployment rate rose 0.7 percentage points to 4.7% during the same period, reports the Associated General Contractors of America (AGC) in its latest analysis of government data. The […]
U.S. construction spending rose fractionally in October after contracting the two months prior, but actual construction outlays year-to-date are 7.5% greater than the first 10 months of 2020, the Commerce Department reported. The Census Bureau’s report on construction spending shows residential slipped 0.5% during October, the once meteoric market now in its fourth month of easing. […]
November was a major letdown for the U.S. labor market, which added just 210,000 jobs, though the unemployment rate ticked slightly lower. The latest data from the U.S. Bureau of Labor Statistics showed that the U.S. economy created far fewer jobs than expected in November, in a sign that hiring started to slow even ahead […]
U.S. job growth was weaker than expected in November, well below estimates for the third time in the past four months. November payrolls rose by 210,000, well below the 573,000 anticipated by Wall Street and a disappointing showing following the 531,000 new jobs added the month prior. Despite the big hiring miss, the unemployment rate […]
By CRU Chief Economist and Head of Sustainability Jumana Saleheen and CRU Principal Economist Alex Tuckett, from CRU’s Economic Outlook, Nov. 30 Global Economic Outlook November 2022 In this Global Economic Outlook, we look ahead to 2022 and outline our top 10 calls for the global economy. These include predictions on world growth, inflation, exchange […]
Algoma Steel Group Inc. has picked Danieli & C. Officine Meccaniche S.p.A (Danieli) as the technology provider for their new electric arc (EAF) steelmaking facility set for operation in early 2024. The Sault Ste. Marie, Ontario-based steelmaker said that Danieli’s systems were the best choice for their new mill as they transition away from basic […]
SSAB Americas will supply the Mobile, Ala.-based shipbuilder Austal USA with steel for the construction of new U.S. Navy ships. The supplier partnership with the Alabama-based steelmaker follows Austal’s award from the U.S. Navy to build steel-hulled Towing, Salvage, and Rescue ships (T-ATS). The Navajo-class ships will be built in new steel shipbuilding facilities that […]
By CRU Analyst Tanya Bhaiji, from CRU’s Steel Sheet Products Monitor, Nov. 29 Galvanized sheet is the biggest first use for refined zinc, constituting around 30% of total refined zinc demand in 2020. The majority of galvanized sheet is consumed in end-use sectors such as construction and automotive while a smaller percentage is also consumed in […]
The U.S. economy expanded at a modest rate from late October to early November, the Federal Reserve said in its latest Beige Book report. Overall growth was again constrained by supply-chain disruptions and labor shortages. Consumer spending increased modestly. But low inventories held back sales of some items, notably light vehicles. Leisure and hospitality activity picked […]
Steel prices declined for the third consecutive month in November, following a 12-month streak of continuous price increases. Hot-rolled coil prices declined $105 per ton throughout the month, with the SMU index averaging $1,770 per ton ($88.50 per cwt) as of Tuesday, Nov. 30. The SMU Price Momentum Indicator for hot-rolled coil was adjusted from Neutral […]
Engineering and construction costs continued to rise in November, though at a slower rate than in October, according to IHS Markit and the Procurement Executive Group (PEG). The November 2021 headline IHS Markit PEG Engineering and Construction Cost Index declined from 74.2 in October to 67.4 in November. The sub-index for materials and equipment costs drove […]
Steel Buyers Sentiment saw a notable dip this week, as did steel prices. Industry sentiment tends to track with steel price tags – the stronger the prices, the more optimistic service center and OEM executives who respond to SMU’s surveys. While sentiment remains near record levels, the downtrend suggests optimism, like prices, may have peaked. SMU […]
First, please note that due to the Thanksgiving holiday, the Steel Market Update newsletter will not be published on Thursday (which is Thanksgiving Day) and Sunday, Nov. 28. We will return to our normal publication schedule on Tuesday, Nov. 30. We want to wish everyone in the United States a happy, healthy Thanksgiving with family and […]
Friedman Industries reported the most profitable quarter in the company’s history with earnings for its fiscal second quarter ended Sept. 30 of $13.2 million on sales of $92.6 million. That’s a big turnaround from the same quarter last year when the company lost $250,000 on sales of $24.9 million due to the pandemic. Results for […]
Sheet and plate prices are nearing parity for the first time in about a year, the latest sign of a market in flux. Below is a good way to visualize that trend. The chart below maps out the spread between sheet and plate going back to 2017. If we rewind to mid-November of last […]
Sheet and plate prices are nearing parity for the first time in about a year, the latest sign of a market in flux. Below is a good way to visualize that trend. The chart below maps out the spread between sheet and plate going back to 2017. If we rewind to mid-November of last […]
With 2022 right around the corner, it’s time to reflect back on an unusual and eventful year for the steel industry. Following is Steel Market Update’s Top 10 News Events of 2021: #10 – Economy Rebounds from COVID: No one could have predicted when the virus crippled commerce in the spring of 2020 that the […]
Housing starts slipped 0.7% in October as single-family housing production lagged, hampered by supply-chain shortages and limited access to labor and lots. Overall housing starts decreased to 1.52 million units, seasonally adjusted, according to the latest data from the U.S. Census Bureau and the Department of Housing and Urban Development. The October reading of 1.52 […]
Strong consumer demand and low inventories helped push builder confidence higher in November for the third consecutive month despite continued supply-side challenges. Even though the construction sector continues to wade through building material bottlenecks and lot and labor shortages, builder sentiment for newly built single-family homes moved three points higher to an index reading of […]
Nucor Corp. will add a blast and prime line to its greenfield steel plate mill currently under construction in Brandenburg, Ky. The blast and prime line will have an annual capacity of approximately 120,000 tons and will provide the Nucor Plate Group with even broader capabilities and offerings for buyers of wider and thicker plate products. The Charlotte-based steelmaker […]