U.S. Steel announced plans to give Mon Valley Works a $1.2 billion upgrade. Expansion plans include a new sustainable endless casting and rolling facility at its Edgar Thomson Plant in Braddock, Pa., and a cogeneration facility at its Clairton Plant in Clairton, Pa. The endless casting and rolling technology combines thin slab casting and hot […]
Note: this article was corrected on 5/3/2019; scrap will be down by $20-$30 per ton-in May, not falling to $230 per ton as previously stated. Ryerson Holding Corp. is expecting a better second half for the steel industry despite some weakening economic data and inventory issues. “Last year was a very unusual time for our […]
Buyers of flat rolled and plate steels with whom Steel Market Update spoke today are concerned about the direction of steel prices, believing prices will continue to fall from here. Many buyers were debating how low prices would go over the next few months. A number have become believers that hot rolled coil will breach […]
AK Steel is not too worried about new steel capacity stealing market share. New carbon steel capacity coming on line is still several years away, said President and COO Kirk Reich. Much of it is not “new” but rather older restarted facilities that AK Steel competed with in the past, and some of that capacity […]
Caterpillar manufacturing costs escalated in first quarter by $375 million compared to a year ago on higher steel prices, freight and variable labor costs. “These higher costs, while unfavorable, were improved from the fourth quarter levels. Material costs included a direct tariff expense in the first quarter of about $70 million, in line with what […]
The vast majority of flat rolled and plate steel buyers are reporting to Steel Market Update that prices on all products will be moving at best sideways, with most believing prices will move lower from here. We are seeing pressure on hot rolled, cold rolled and plate prices right now as indexes on these products […]
Reliance Steel & Aluminum posted a good first quarter with net sales of $2.96 billion, increasing 7.2 percent year-over-year and 4.1 percent from the fourth quarter. Net income jumped 122 percent from the fourth quarter to $190.1 million. Tons sold increased 5.2 percent from the fourth quarter to 1.5 million tons, but were slightly below […]
NLMK USA shipments increased 19 percent to 600,000 metric tons from the fourth quarter of 2018 to the first quarter of 2019. Higher shipments resulted in $530 million in revenue—a 4.0 percent increase despite steel prices slipping 12 percent quarter-over-quarter. NLMK USA hot rolled coil shipments totaled 330,000 metric tons and high value added products […]
The construction industry is struggling to fill labor demands and urges the government to allow the sector to bring in qualified guest workers from other countries. Thirty-eight states added construction jobs between March 2018 and March 2019, while construction employment increased in 29 states between February and March, says a new analysis of Labor Department […]
Like the mills, service centers enjoyed robust returns in 2018. With one quarter in the books, it appears this year is setting up to be more challenging. Steel Market Update has recruited three of the industry’s top distribution execs to share their perspectives on steel demand in 2019 during SMU’s Steel Summit Aug. 26-28 in […]
Like the mills, service centers enjoyed robust returns in 2018. With one quarter in the books, it appears this year is setting up to be more challenging. Steel Market Update has recruited three of the industry’s top distribution execs to share their perspectives on steel demand in 2019 during SMU’s Steel Summit Aug. 26-28 in […]
Steel Dynamics has narrowed the choice for its new flat rolled steel mill to either Texas or Louisiana. The planned $1.8 billion EAF mill will have an annual production capacity of 3 million tons and include a 450,000-ton galvanizing line and 250,000-ton paint line with Galvalume capability. The mill will differentiate itself by producing higher […]
Nucor announced net income of $501.8 million for the first quarter of 2019, a 22 percent decrease from income of $646.85 million in the fourth quarter. Net sales slipped 3.0 percent sequentially to $6.10 billion from the fourth quarter as the average sales price per ton dipped 4.0 percent. The drop in earnings was expected […]
“A somewhat challenging flat-rolled price environment” is how Steel Dynamics CEO Mark Millett described the first quarter of 2019. SDI posted net income of $204 million in the first quarter and sales of $2.8 billion. Lower steel prices impacted sales resulting in 3.0 percent decline sequentially. Operating income for the company’s steel operations fell 22 […]
By CRU Chief Economist Jumana Saleheen The latest Chinese data surprised on the upside. It suggests that the China stimulus is working. But some of the strength is also likely due to one-off factors. As a result, we see the latest data as an indication that the economy is stabilizing rather than accelerating. Recent data […]
Housing starts showed continued weakness in March, dipping 0.3 percent from February’s downwardly revised data to a seasonally adjusted annual rate of 1,139,000. Housing starts were 14.2 percent below the rate in March 2018. Single-family home starts dipped 0.4 percent from the previous month to the lowest level since September 2016. Starts for multi-dwelling homes […]
By CRU Senior Analyst Erik Hedborg Demand for steelmaking raw materials has improved in April. Chinese steel prices have jumped on rising seasonal demand, particularly from the construction sector. Steel production in the country has also picked up, as indicated by the blast furnace (BF) utilization rate displayed in CRU’s Coking Coal and Iron Ore Dashboards. This has […]
First, please be aware that Sunday is Easter and Steel Market Update will not publish an issue on Sunday evening. Our next issue will be on Tuesday, April 23. We have been receiving calls and getting comments associated with our release of the SMU Service Center Inventories Analysis in Sunday evening’s issue where we showed […]
Global steel demand will top 1.75 billion metric tons by the end of next year, despite economic headwinds in many parts of the globe, predicts the World Steel Association in its April 2019 Short Range Outlook. Worldwide, steel demand will increase by 1.3 percent this year to 1,735 Mt, followed by further 1 percent growth […]
Net job creation in March totaled 196,000, an increase from an upwardly revised 33,000 in February. January was revised up by 1,000 to 312,000. Rising employment and wages are the main contributor to GDP growth because personal consumption accounts for almost 70 percent of GDP. Steel consumption is related to GDP; therefore, this is one […]
U.S. manufacturing lost jobs in March, but has had strong job growth in the last 12 months. In March, 182,000 jobs were created in the private sector and government added 14,000, reports the Bureau of Labor Statistics. Table 1 breaks total employment down into service and goods-producing industries and then into private and government employees. […]
Interlake Steamship Company has partnered with Fincantieri Bay Shipbuilding to build the first U.S.-flagged Great Lakes bulk carrier in more than 35 years. “It’s being built with a lot of steel from Great Lakes steel mills to carry the products that help to do just that,” said Interlake Steamship President Mark Barker in remarks to […]
The following article discussing the global ferrous derivatives markets was written by David Feldstein. As an independent steel market analyst, advisor and trader, we believe he provides insightful commentary and trading ideas to our readers. Note that Steel Market Update does not take any positions on HRC or scrap trading, and any recommendations made by […]
By CRU Chief Economist Jumana Saleheen The market had hoped that China would unveil a large stimulus package at the March NPC, but any expectation of a large boost to world growth and commodities demand has not come, yet. The current stimulus package is smaller, less potent and less positive for commodities demand than previous […]
SMU was speaking to a coated sheet steel buyer this afternoon about flat rolled steel prices. He made an interesting observation about how the markets have become quite complicated. When looking at galvanized, for example, there are different starting points for light gauge, medium gauge and heavy gauge steels. There are also regional differences (southern […]
SMU was speaking to a coated sheet steel buyer this afternoon about flat rolled steel prices. He made an interesting observation about how the markets have become quite complicated. When looking at galvanized, for example, there are different starting points for light gauge, medium gauge and heavy gauge steels. There are also regional differences (southern […]
Steel Market Update is pleased to share this Premium content with Executive-level members. For more information on how to upgrade to a Premium-level subscription, email info@SteelMarketUpdate.com. This is a quarterly analysis that SMU performs using data from the Iron and Steel Statistics Bureau in the UK. We believe that to improve our understanding of the […]
Sales of HVAC products remain fairly strong in most parts of the country, but prices don’t fully reflect that demand, reported members of the Heating, Air-conditioning and Refrigeration Distributors International in their monthly conference call. “I still think the market is fragile,” commented one HARDI member. “The mills have a lot of fundamentals in their […]
By CRU North America Analyst Ryan McKinley U.S. long product prices have come under downward pressure, driven primarily by persistently high inventory levels. This inventory build-up has been compounded by an increase in import levels in March relative to the prior month, and consistently wet weather in many regions of the U.S. has delayed any […]
Residents near U.S. Steel’s Mon Valley Works are in an uproar over plans to allow New Mexico-based Merrion Oil & Gas to drill for natural gas in the Edgar Thomson Plant. U.S. Steel has leased 10 acres of land at the plant in Braddock, Pa., to Merrion Oil to construct three fracking wells that will […]