More than 1,400 of you are now signed to attend Steel Summit – which kicks off next week at the Georgia International Convention Center (GICC) in Atlanta. We are very close to beating last year’s record attendance. So, if you’re on the fence, help us be part of steel history again – register here!
Lead times for hot-rolled coil and plate have moved out a little, according to our latest survey data. Brett Linton has the details here. I think that might reflect some restocking and a host of fall maintenance outages – many of which are happening in September/October. But lead times aren't galloping away like some of the more bullish corners of the market might have hoped. And those for cold-rolled and coated products are largely unchanged.
The countdown is on! In less than two weeks, we’ll kick off the 2024 SMU Steel Summit. This year is poised to be the best attended yet. More than 1,350 delegates have already registered – so we’re within sight of last year’s record number of nearly 1,450. I’m looking forward to learning from executives across […]
I asked in a prior Final Thoughts where some of you thought Nucor’s weekly spot HR price would land. One opinion: $720 per short ton (st). That would allow the Charlotte, N.C.-based steelmaker to one up competitor Cleveland-Cliffs and to re-establish its position as a market leader.
Flat-rolled steel prices have begun inflecting up on the back of mill prices hikes over the past couple of weeks. It’s a notable shift after tags slid downhill for most of the year. (There was a slight bump upward in late March/early April before the decreases resumed.) And now, after reaching levels not seen since […]
SMU has adjusted its sheet momentum indicator from neutral to higher for the first time since early April. The shift comes on the back of price hikes for leading sheet mills Nucor and Cleveland-Cliffs.
It might be the dog days of summer. But it’s been a newsy week for steel. Let’s start on the trade front, where we had a big decision in a case before the Commerce Department about Vietnam’s market status. Ethan Bernard covered the news. Commerce determined that Vietnam remained a “non-market economy,” or NME, based on factors such as government control over private property, labor conditions, and one-party rule. What’s also notable, and which Wiley trade attorney Alan Price points out in a good column on the matter, is that Commerce’s decision cannot be appealed.
What a difference a week makes! SMU has shifted its sheet momentum indicators from “lower” to “neutral”. And we’ll be on the lookout for evidence of higher prices in the weeks ahead.
Nearly 1,200 people have registered for SMU Steel Summit, which is less than a month away now. That means we’re still on pace to meet or exceed last year’s record attendance despite a tough flat-rolled steel market over the last few months. So, a big thank you to everyone who already plans to go for your continued support. If you haven’t booked travel yet, don’t miss out on one of the greatest shows in steel – register here. (You can also check out the latest agenda here.)
SMU has heard from some larger buyers who have stepped back into the market to buy at prices that, if not at a bottom, they assess to be close to one. Is it enough to stretch out lead times and send prices upward again? Or do we continue to scrape along the mid-$600s per short ton (st) as we have been doing for most of the last month?
Cleveland-Cliffs Chairman, President and CEO Lourenco Goncalves had some insightful things to say today about the steel market and about a conference we suspect might be Steel Summit.
They say a picture is worth a thousand words. Well, when you add in some commentary from respected peers in the steel industry to those pictures, that may shoot you up to five thousand words, at least. In that spirit, we’ve added some snapshots from our market survey this week, along with some comments from market participants.
The latest SMU market survey results are now available on our website to all premium members. After logging in at steelmarketupdate.com, visit the pricing and analysis tab and look under the “survey results” section for “latest survey results.” Historical survey results are also available under that selection. If you need help accessing the survey results, or if your […]
I thought we’d have more clarity this week on Section 232, Mexico, and a potential carve-out for steel melted and poured in Brazil. As of right now, the only official comment I have is from the Office of the United States Trade Representative (USTR).
There are just 40 days left until the 2024 SMU Steel Summit gets underway on Aug. 26 at the Georgia International Convention Center (GICC) in Atlanta. And I’m pleased to announce that it's official now: More than 1,000 people have registered to at attend! Another big development: The desktop version of the networking app for the event has officially launched!
There are a lot of rumors swirling around the steel market over the last couple of weeks. Chief among them was that we might see a price hike after Independence Day. Another concerns a key detail in the new Section 232 agreement with Mexico. Namely, steel imported from Brazil into Mexico. Of particular interest is its potential implication for slabs imported from Brazil, rolled in Mexico, and then exported to the US.
We’ve taken some time to supply you with some handy-dandy production figures for 2024 presented in a unique way.
Flat-rolled steel prices have been largely falling since the beginning of the year. Even after a slight bump in early April when mills tried to halt the downtrend, the decrease resumed.
First off, we hope everyone had a safe and happy July 4th holiday, with fireworks seen and BBQs attended. Many parts of the country are quite toasty at the moment, signaling that, yes, summer has indeed arrived. And looking at our most recent survey results, the summer doldrums have arrived as well.
The latest SMU market survey results are now available on our website to all premium members. After logging in at steelmarketupdate.com, visit the pricing and analysis tab and look under the “survey results” section for “latest survey results.”
It’s been a slow start to the week as far as news goes, something you’d expect ahead of a shortened Independence Day week. That said, it’s not as if transactions have completely ground to a halt. (Prices continue to drift lower.) And while news might be slow, rumors of low-priced deals, price hikes, and trade cases seem to have filled that void.
Domestic plate prices have been on a historic run since they began surging in January 2021. Tags reached an all-time high of $1,940 per short ton (st) in May 2022, though they have mostly trended lower over the past two years.