Imports of rolled products through May, year over year, were not affected by the pandemic, but the longer-term decline continued, according to the latest Commerce Department data. Year over year, total rolled product imports in May were down by 24.8 percent on a three-month moving average (3MMA) basis. This was the seventh consecutive month where […]
By CRU Principal Analyst Josh Spoores and CME Group Commodities Research Analyst Gregor Spilker The CME Group recently launched a new steel futures contract which follows the U.S. hot-dipped galvanized (HDG) coil market. The U.S. Midwest Domestic Steel Premium (CRU) Futures is financially settled against the difference between U.S. Midwest hot-dipped galvanized coil (base) steel […]
In 2019, imports of hot dipped galvanized sheet into the Great Lakes represented more than half the national total, and this was one of only two regions to experience an increase in 2019. SMU presents a comprehensive series of import reports ranging from the first look at licensed data to the detailed look at volume […]
CRU’s U.S. Midwest hot-dipped galvanized (HDG) coil base price index will be used in the settlement of the CME Group’s new cash-settled U.S. Midwest Domestic Steel Premium (CRU) Futures contract. As announced earlier today by CME Group, the contract will settle on the premium of CRU’s HDG coil base price over the established CRU U.S. […]
Steel Market Update offers a comprehensive series of import reports ranging from the first look at licensed data to the very detailed look at volume by district of entry and source nation. The report you are reading now is designed to plug the gap between those two. National level import reports do a good job […]
NLMK USA’s sales fell 6.0 percent to 549,000 metric tons in the third quarter of 2019 compared to the second quarter, said NLMK Group in a trading update today. Declining volume was the result of decreased HRC sales due to lower demand from the tube and pipe sector. Shipments of hot-dipped galvanized (HDG) also decreased […]
U.S. steel mills shipped 8,472,088 net tons for the month of August, a 4.4 percent increase from the 8,115,103 net tons shipped in the previous month, July 2019, and a 0.4 percent increase from the 8,441,597 net tons shipped in August 2018, reported the American Iron and Steel Institute in Washington. Shipments year-to-date totaled 64,810,436 […]
This analysis breaks down the imported tonnage of six flat rolled products into the district of entry and the source nation. We believe that misinformation (or lack of) about local import volumes is often used to influence purchase decisions. Our intent with this analysis is to describe in detail what is going on in a […]
Steel Market Update offers a comprehensive series of import reports ranging from the first look at licensed data to a detailed look at volume by district of entry and source nation. This report, on hot-dipped galvanized sheet, is designed to plug the gap between the two. We will report data for regional imports for each […]
On Wednesday morning, Nucor announced a $40 per ton ($2.00/cwt) “minimum” price increase on flat rolled steel products. The mill advised their customers the increase was to be “effective immediately.” This is the second price increase announcement out of Nucor in less than 30 days. On Jan. 28, 2019, Nucor announced a $40 per ton […]
ArcelorMittal announced minimum prices for its flat rolled products today in response to improved demand. “Over the past couple of weeks, we have experienced a significant increase in order entry for sheet products,” the mill said in a letter to customers. Effective immediately, the minimum price for new orders of hot rolled sheet from ArcelorMittal […]
The Great Lakes region has received the greatest volume of hot-dipped galvanized sheet imports so far in 2018. Each month, Steel Market Update produces an import analysis by region for two of the six flat rolled product groups (HRC, CRC, HDG, OMC, CTL plate and coiled plate). This month, the focus is on coated products. […]
Mills historically have enjoyed a healthy price premium for cold rolled and galvanized products over hot rolled, at times reaching as high as $220 per ton. More recently, due to the tight supplies of hot rolled, the differential has dipped as low as $80 per ton, prompting at least one mill to act. ArcelorMittal USA […]
Imports of hot-dipped galvanized sheet into the U.S. as a whole were down by 10.9 percent year to date through May, according to Steel Market Update’s latest analysis of Commerce and ITC data. SMU now has a comprehensive series of import reports ranging from the first look at license data to the very detailed look […]
U.S. steel mills shipped 7,798,326 net tons in April, a 6.0 percent decrease from the 8,299,418 net tons shipped in the previous month, and a 5.0 percent increase from the 7,428,080 net tons shipped in April 2017, reported the American Iron and Steel Institute in Washington. Shipments in the first four months of 2018 totaled […]
Editor’s Note: Not a Premium-level subscriber to SMU? See the sample Premium report below: Hot-rolled coil imports in the first four months of the year increased by 38 percent nationally, but saw big variations regionally. Imports can vary significantly from one region to another. Steel Market Update has produced import reports by product at the […]
Editor’s Note: Not a Premium-level subscriber to SMU? See the sample Premium report below: Overall, U.S. imports of cold rolled coil declined by 17 percent year to date through April, but some regions saw increases. Imports can vary significantly from one region to another. Steel Market Update has produced import reports by product at the […]
Editor’s Note: Not a Premium-level subscriber to SMU? See the sample Premium report below: Imports of hot-dipped galvanized sheet into the U.S. as a whole declined by 8 percent year to date through April, but the Great Lakes region was up by 14.1 percent and the South Pacific was down by 33.8 percent. Imports can […]
I am excited for you, our customers. I have been working closely with the CRU Group, and our members will begin to see some subtle changes to the articles we write. One will be the use of CRU data on such items as our Foreign vs. Domestic Price Spread articles, which we will publish in […]
U.S. steel mills shipped 7,525,590 net tons in February, a 1.5 percent decrease from the previous month. The total was a 4.1 percent increase from the 7,232,341 net tons shipped in February 2017, however, reports the American Iron and Steel Institute in Washington. Steel shipments year-to-date in 2018 total 15,161,931 net tons, a 1.5 percent […]
President Trump’s 25 percent tariff on steel from countries around the world comes at what cost? The trade action by the Trump administration is unpopular among the majority of the executives who responded to Steel Market Update’s market trends questionnaire last week just before the president announced the tariffs, as expected. Nearly seven out of […]
President Trump’s 25 percent tariff on steel from countries around the world comes at what cost? The trade action by the Trump administration is unpopular among the majority of the executives who responded to Steel Market Update’s market trends questionnaire last week just before the president announced the tariffs, as expected. Nearly seven out of […]
Steel prices have been on the rise for the past four months, so it’s no surprise that steel buyers are reporting mills less willing to negotiate. More than 60 percent of respondents to Steel Market Update’s latest market trends questionnaire say mills are holding firm in price negotiations. About 10 percent say they still find […]
This analysis breaks down the imported tonnage of six flat rolled products into the district of entry and the source country. We believe that misinformation (or lack of) about regional import volumes are often used to influence purchase decisions. Our intent with this analysis is to describe in detail what is going on in a […]
Responding to strong demand in the New Year and the market’s apparent acceptance of higher price tags, the major mills have announced another round of price increases on plate and flat rolled products. For most mills, this is the fourth increase they’ve announced in the past three months. On Monday, Nucor’s Plate Mill Group announced […]
The Nucor Sheet Mill Group informed customers on Friday of this past week, that it is raising base prices on new orders by a minimum of $30 per ton on hot rolled, cold rolled and galvanized products. Nucor’s latest hike follows a $40 per ton increase the steelmaker announced on flat rolled spot prices early […]
The Nucor Sheet Mill Group informed customers today, Friday, that it is raising base prices on new orders by a minimum of $30 per ton on hot rolled, cold rolled and galvanized products. Nucor’s latest hike follows a $40 per ton increase the steelmaker announced on flat rolled spot prices early this month. On Thursday, […]
West Coast steel mills California Steel Industries (CSI) and USS-POSCO Industries (UPI) announced further flat roll price increases yesterday, Jan. 24. Today, ArcelorMittal USA began advising their flat rolled customers of a change in their minimum base price levels on hot rolled, cold rolled and coated steels. CSI told customers that due to changing market […]
Zinc reached a 10-year high on Thursday, closing at $3,364 per metric ton on the London Metal Exchange. Zinc, used for galvanizing metals, has nearly doubled in price over the past two years as supplies have tightened. At the same time, demand has increased. Chinese demand grew by 2.1 percent last year, and U.S. demand […]
Following on the $40 per ton price hikes by most domestic mills earlier this week, ArcelorMittal USA announced the following minimum prices on its carbon steel sheet products today: hot rolled, $720/ton; cold rolled, $900/ton; and hot-dipped galvanized, $900/ton. The new prices are effective immediately on all new and unconfirmed orders with ArcelorMittal USA and […]