U.S. service centers shipped 38.779 million tons of steel products in 2017, an increase of 3.8 percent compared with full-year 2016, according to the Metals Service Center Institute’s December Metals Activity Report. Shipments of carbon flat roll and plate saw single-digit increases over the prior year, while shipments of pipe and tube products saw a […]
Steel shipments by Canadian service centers in December totaled 280,100 net tons, down 29.8 percent from the previous month, and down 3.4 percent from December 2016, reports the Metals Service Center Institute (MSCI). On a daily basis, total shipments were 14,700 tons per day in December (a 20-day month), down from 19,000 tons per day […]
Over the past six months, Steel Market Update has been canvassing flat rolled steel service centers as we try to better understand the number of months of supply being held as of the end of each month. Steel distributors now hold three months (3.03 month’s supply) based on the responses we have received from our […]
Flat rolled steel prices moved higher over the past week. Hot rolled offers are reaching (or exceeding) $700 per ton, while cold rolled and coated offers are moving into the low to mid $800s (base pricing, before extras). Steel buyers seemed resigned to paying higher numbers with many waiting to see what will happen with […]
Service center shipments in November declined by 2.5 percent, close to the normal seasonal change for this time of year, according to Steel Market Update’s analysis of Metals Service Center Institute data. Daily shipments in November were 2.5 percent lower than in October. On average since 2009, November has decreased by 2.1 percent from the […]
Steel shipments by Canadian service centers in November totaled 398,900 net tons, up 1.8 percent from the previous month, and up 0.2 percent from November 2016, reports the Metals Service Center Institute (MSCI). On a daily basis, total shipments were 19,000 tons per day in November (a 21-day month), up from 18,700 tons per day […]
Service centers continue to hold flat rolled inventories steady at 2.89 months of supply at the end of November, according to the proprietary Steel Market Update Service Center Inventories Index (SSII). This is now the third consecutive month we have found flat rolled steel distributors’ inventories close to the three months of supply level. Contrast […]
Flat rolled steel inventories ended the month of October in a balanced situation based on the Steel Market Update Apparent Excess/Deficit proprietary model, which is applied to the MSCI inventories and shipment data. U.S. steel service centers ended the month of September with +68,000 tons of excess inventories, based on the SMU model. Our forecast […]
Service center shipments in October exceeded expectations, led by long products and plate, according to Steel Market Update’s analysis of Metals Service Center Institute data. Daily shipments in October were 1.9 percent higher than in September. On average since 2009, October has decreased by 1.9 percent, therefore these latest numbers were better than the historical […]
Twice per month, Steel Market Update (SMU) conducts an analysis of the flat rolled steel market and the trends that affect pricing, demand, etc. Each analysis is conducted via an email invitation to complete a questionnaire. SMU invites approximately 650 individuals who are active participants in the manufacturing, distribution, toll processing, trading and steel mill […]
The Metals Service Center Institute (MSCI) released service center shipment and inventories data earlier this week. According to the MSCI data, flat rolled inventories now average 2.1 months of supply based on the 104,600 tons per day shipment rate reported for the month of October. October 2017 shipments were 9.6 percent better than one year […]
Steel shipments by Canadian service centers in October totaled 391,700 net tons, up 9.8 percent from the previous month, and also up 9.8 percent from October 2016, reports the Metals Service Center Institute (MSCI). On a daily basis, total shipments were 18,700 tons per day in October (a 21-day month), up from 17,800 tons per […]
Wholesaler/distributors who sell galvanized steel products to the HVAC market are waiting anxiously to see what happens to prices in the coming weeks. In the monthly steel conference call hosted today by the Heating, Air-conditioning, and Refrigeration Distributors International, HARDI members asked two key questions: Will the mills be able to collect the flat roll […]
Steel Market Update (SMU) has a proprietary model that analyzes the Metals Service Center Institute (MSCI) carbon flat rolled shipment and inventory data, from which we calculate whether distributor inventories are in Excess/Balance/Deficit. We ended the month of August with steel service center inventories as essentially balanced (-26,000 tons). The month of September saw a […]
Service centers’ daily steel shipments in September were 0.9 percent higher than in August, matching the average since 2009. Therefore, the latest numbers were exactly on the historical track for this time of year, according to Steel Market Update’s analysis of Metals Service Center Institute data (MSCI). Carbon steel shipments were 144,400 tons per day […]
September steel shipments by U.S. service centers were essentially unchanged from September 2016. U.S. steel inventories increased on a year-over-year basis for the first time since August 2015, stated the Metals Service Center Institute in its September Metals Activity Report. U.S. service center shipments of all steel products in September totaled 3.043 million tons, about […]
Steel shipments by Canadian service centers in September totaled 356,600 net tons, down 8.0 percent from the previous month, and down 3.8 percent from September 2016, reports the Metals Service Center Institute (MSCI). On a daily basis, total shipments were 17,800 tons per day in September (a 20-day month), up from 17,600 tons per day […]
For the second month in a row, Steel Market Update (SMU) did reasonably well with our forecast for August shipments, inventories and where we thought the Apparent Deficit/Excess for service center carbon flat rolled inventories would be at the end of August. SMU forecast shipments of hot rolled, cold rolled and coated steels would total […]
Service center shipments in August failed to perform as well as the average since 2009, according to data from the Metals Service Center Institute. Daily shipments in August were 1.8 percent higher than in July. On average since 2009, August has increased by 3.0 percent, therefore the latest numbers were less than the historical average […]
The Metals Service Center Institute (MSCI) reported carbon flat rolled steel inventories as growing in August compared to the end-of-July 2017 data, but still below August 2016 levels. MSCI data shows the number of months of flat rolled supply at very low levels. This week, MSCI reported total steel shipments (all products) during August out […]
Steel shipments by Canadian service centers in August totaled 387,500 net tons, up 11.8 percent from the previous month, and up 6.2 percent from August 2016, reports the Metals Service Center Institute (MSCI). On a daily basis, total shipments were 17,600 tons per day in August (a 22-day month), up from 17,300 tons per day […]
The Metals Service Center Institute is urging the Trump administration to take “swift, decisive action on the Section 232 steel investigation to bring certainty to the marketplace.” In a letter to President Trump last Thursday, MSCI President and CEO Robert Weidner, III, and Chairman R. Holman Head, stated that “problems posed by foreign government-sponsored capacity […]
How can domestic mills expect to increase prices when their lead times are so short and foreign steel is still so plentiful? In the monthly steel conference call hosted today by the Heating, Air-conditioning, and Refrigeration Distributors International, HARDI members commented on the contradictions in mill behavior that have left them confused and concerned about […]
During the week of Aug. 14, 2017, the U.S. steel mills advised their flat rolled and steel plate customers of their intention to increase spot prices on hot rolled, cold rolled, galvanized and Galvalume steels, as well as plate. The flat rolled mills announced $30 per ton base price increases on new spot business. For […]
Service center shipments took the normal dip in July, but the decline was slightly more than the historical average. Months on hand at the end of July were up sharply, partly because of a decline in shipping days, according to Steel Market Update’s latest analysis of Metals Service Center Institute data. Daily shipments in July […]
Based on the Metals Service Center Institute’s (MSCI) July metals activity report, carbon flat rolled inventories rose in July while the daily shipment rate dropped resulting in an increase in the number of months’ supply being held at flat rolled steel service centers. Total Steel Shipments Total shipments of all steel products equaled 2,960,700 net […]
Trucks needed to haul steel and other materials are in short supply and availability is likely to get tighter later this year when drivers will be required to use electronic logging devices (ELDs) rather than hand-written logs to record their hours behind the wheel. The American Trucking Associations estimate that the new ELD requirement, which […]
Steel shipments by Canadian service centers in July totaled 346,500 net tons, down 11.7 percent from the previous month, but up 8.7 percent from July 2016, reports the Metals Service Center Institute (MSCI). On a daily basis, total shipments were 17,300 tons per day in July (a 20-day month), down from 17,800 tons per day […]
The growth of service center shipments in June beat the average performance since 2009, according to data from the Metals Service Center Institute (MSCI). Inventories tend to be lower at mid-year, which is the case in 2017. Daily shipments in June were 0.8 percent higher than in May. On average since 2009, June has decreased […]
After a careful analysis of the Metals Service Center Institute (MSCI) carbon flat rolled shipment and inventories data, and then applying that data to our proprietary Apparent Excess/Deficit inventories model, we have determined that distributor inventories improved during the month of June. At the end of May, based on the MSCI data, SMU calculates that […]