Canada will keep safeguard tariffs on imports of heavy plate and stainless steel wire—only two products of the original seven provisional safeguards implemented in October. In April, the Canadian International Trade Tribunal found that imports of hot-rolled steel, pre-painted steel, energy tubular products, rebar and wire rod did not pose a threat of “serious injury” […]
Management at NLMK USA is contemplating its next move after receiving the disappointing news Tuesday that the U.S. Commerce Department has denied its appeals for exclusions from the Section 232 tariffs on imported slabs. Commerce has determined that semifinished steels are available in sufficient quantities to support the domestic market, and that slab converters like […]
The vast majority of flat rolled and plate steel buyers are reporting to Steel Market Update that prices on all products will be moving at best sideways, with most believing prices will move lower from here. We are seeing pressure on hot rolled, cold rolled and plate prices right now as indexes on these products […]
NLMK USA shipments increased 19 percent to 600,000 metric tons from the fourth quarter of 2018 to the first quarter of 2019. Higher shipments resulted in $530 million in revenue—a 4.0 percent increase despite steel prices slipping 12 percent quarter-over-quarter. NLMK USA hot rolled coil shipments totaled 330,000 metric tons and high value added products […]
Nucor announced net income of $501.8 million for the first quarter of 2019, a 22 percent decrease from income of $646.85 million in the fourth quarter. Net sales slipped 3.0 percent sequentially to $6.10 billion from the fourth quarter as the average sales price per ton dipped 4.0 percent. The drop in earnings was expected […]
“A somewhat challenging flat-rolled price environment” is how Steel Dynamics CEO Mark Millett described the first quarter of 2019. SDI posted net income of $204 million in the first quarter and sales of $2.8 billion. Lower steel prices impacted sales resulting in 3.0 percent decline sequentially. Operating income for the company’s steel operations fell 22 […]
The metalforming industry is expecting a dip in business conditions in the next three months, according to the April 2019 Precision Metalforming Association survey. “The Business Conditions Report reflects the growing concern of metalforming manufacturers that the Section 232 steel tariffs are creating a drag on the U.S. manufacturing sector,” said PMA President David Klotz. […]
Data in Steel Market Update’s Steel Buyers Sentiment Index took a decidedly pessimistic turn this week. Current Sentiment hit its lowest reading since October 2016. The goal of the index is to measure how buyers and sellers of steel feel about their company’s ability to be successful today (Current Index), as well as three to […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: The lawsuit challenging the constitutionality of Section 232 took an interesting turn earlier this week, with plaintiffs’ petition for immediate Supreme Court review of the case, without passing through the Court of Appeals for the Federal Circuit. Ordinarily, […]
Steel interests in North America and the rest of the world are watching intently to see if the Trump administration grants some tariff relief to Canada and Mexico to clear the way for final approval of the new U.S.-Canada-Mexico Trade Agreement. One possible compromise being discussed (albeit one so far opposed by the U.S. trading […]
Editor’s note: The following analysis by Alex Lawson of Law 360 describes the American Institute for International Steel’s position on its filing Monday with the U.S. Supreme Court. The legal push to strike down the Cold War-era law used by President Donald Trump to set tariffs on national security grounds unexpectedly shifted to the U.S. […]
Editor’s note: The following analysis by Alex Lawson of Law 360 describes the American Institute for International Steel’s position on its filing Monday with the U.S. Supreme Court. The legal push to strike down the Cold War-era law used by President Donald Trump to set tariffs on national security grounds unexpectedly shifted to the U.S. […]
The Russians are coming—to Kentucky. Russian aluminum producer United Co. Rusal plans to invest $200 million in a $1.7 billion rolling mill being built by start-up company Braidy Industries in Ashland, Ky. The investment will give Rusal a 40 percent stake in the project and a significant presence in the U.S. automotive and aerospace aluminum […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: On April 5, the WTO issued a long-awaited Panel decision in a dispute settlement case between Russia and Ukraine. Ukraine complained that Russia interfered with Ukrainian trade flows by restricting the routes that goods could travel. Russia argued […]
The World Trade Organization ruled during a dispute settlement between the Ukraine and Russia that trade restrictions imposed on the grounds of national security are reviewable by the WTO–a decision that could have ramifications for the use of national security measures under Section 232 in the United States. The ruling states that the provision for […]
It took a couple of years, dozens of trade suits, a Section 301 investigation, Changes to the Country of Origin, the Section 232 tariffs and finally a pull-back in domestic pricing to dramatically reduce the amount of foreign steel tonnage coming into the U.S. market. This reduction will not be short-lived. It will continue for […]
The following article discussing the global ferrous derivatives markets was written by David Feldstein. As an independent steel market analyst, advisor and trader, we believe he provides insightful commentary and trading ideas to our readers. Note that Steel Market Update does not take any positions on HRC or scrap trading, and any recommendations made by […]
Following a slower than expected first quarter, activity has begun to pick up in the nonprime/secondary steel market, report service center executives. “Maybe that’s good news for April going forward,” said Lisa Goldenberg, president of Delaware Steel of Pennsylvania, Fort Washington, Pa. Nonprime or secondary steel includes coils that are rejected because they failed to […]
A surprising two out of three respondents to Steel Market Update’s market trends questionnaire last week said they are not concerned about the direction of steel prices, at least in the short term, though some question the staying-power of current demand. Steel Market Update asked: “Foreign steel imports are dropping and the domestic mills are […]
Sales of HVAC products remain fairly strong in most parts of the country, but prices don’t fully reflect that demand, reported members of the Heating, Air-conditioning and Refrigeration Distributors International in their monthly conference call. “I still think the market is fragile,” commented one HARDI member. “The mills have a lot of fundamentals in their […]
Data in Steel Market Update’s Steel Buyers Sentiment Index were slightly more optimistic this week, though comments from respondents reflect concerns in the market about trade issues, steel demand and the economy. We also continue to see Current Sentiment as being less optimistic than at this time one year ago. However, our Future Sentiment Index […]
Year over year, total rolled product imports in March were down by 11.2 percent, measured as a three-month moving average (3MMA). This early look at March’s import volume is based on Commerce Department license data (see explanation below). Beginning in January 2018, we expanded this import analysis to include all major steel sectors: sheet, plate, […]
The American Institute for International Steel has appealed its case against President Trump’s Section 232 tariffs to the U.S. Court of Appeals. “This appeal is an important element of our overall legal strategy. As we noted when we started this journey nine months ago, we strongly believe that in the end this matter will be […]
The Canadian International Trade Tribunal recommended on Wednesday that five of seven provisional steel safeguards, imposed by the government following the imposition of Section 232 tariffs by the U.S., be removed. A CITT inquiry concerning the importation into Canada of heavy plate, concrete reinforcing bar, energy tubular products, hot-rolled sheet, pre-painted steel, stainless steel wire, […]
The latest survey of metalforming companies by the Precision Metalforming Association revealed uncertainty about business activity during the next three months. A survey of 110 firms, in the March 2019 PMA Business Conditions Report, showed 37 percent expect improving business conditions during the period, 49 percent anticipate no change, and 14 percent expect business activity […]
March 23 marked the one-year anniversary of the Section 232 tariffs on steel and aluminum. The Coalition of American Metal Manufacturers and Users had the following comments for the Trump Administration: “The Coalition of American Metal Manufacturers and Users urges the Trump Administration to terminate the Section 232 steel and aluminum tariffs. At their one-year […]
Much attention has been given to opponents of the Section 232 tariffs, but there are those who support keeping the tariffs even after a new North American trade agreement is approved. The American Line Pipe Producers Association, makers of large-diameter welded pipe, urged the administration to continue the tariffs on LDWP imports from Canada and […]
Steel markets are facing “considerable downside risk” as excess capacity continues to a be a major challenge for the global steel industry. The Organization for Economic Cooperation and Development (OECD) found that global steelmaking capacity (in nominal crude terms) was nearly unchanged in 2018 at 2.234 billion metric tons, after declining in the previous two […]
The U.S. Court of International Trade ruled against a legal challenge to the constitutionality of Section 232 brought by the American Institute for International Steel. AIIS alleged that Section 232 violates the constitutional prohibition against Congress delegating its legislative powers to the president. The CIT denied a motion by AIIS for a summary judgment, citing […]
The decision by the U.S. Court of International Trade to deny the American Institute for International Steel’s motion for summary judgment on its constitutional challenge to Section 232 has not deterred AIIS from further action. Said AIIS President Richard Chriss: “We are heartened that the Court of International Trade recognized that Section 232, in the […]