International Steel Prices
World Export vs. Domestic Hot Rolled Coil Price Spread Widens
Written by Brett Linton
January 28, 2016
The following calculation is used by Steel Market Update to identify the spread between world hot rolled export prices as determined by SteelBenchmarker and domestic (US) hot rolled prices as published by SMU. Steel Market Update compares the world hot rolled export price to which dollars are added for freight, handling, trader margin, etc. The number generated is then compared to the spot (FOB Mill) domestic hot rolled price using the SMU Hot Rolled Index average for this week, with the result being the spread between domestic and world hot rolled coil prices. This is a ‘theoretical’ calculation as freight costs, trader margin and other costs can fluctuate ultimately influencing the true market spread.
This theoretical price spread analysis is based on our review of world export prices and the hot rolled steel price index produced by SMU earlier this week. As the spread narrows, the competitiveness of imported steel into the United States is reduced. If it widens then foreign steel becomes more attractive to U.S. flat rolled steel buyers.
The world export price for hot rolled bands is $255 per net ton ($281 per metric ton) FOB the port of export according to data released by SteelBenchmarker earlier this week. This is down $2 from the previous release on January 11th and down $2 per ton compared to the late-December price.
SMU uses a minimum of $70 to as much as $100 per ton for freight, handling, and trader margin, which is then added to the export number in order to get the steel to ports in the United States. This puts the “theoretical” selling price for hot rolled coil exported to the United States as ranging from $325 to $355 per ton CIF USA Port.
The latest Steel Market Update hot rolled price average is $405 per ton for domestic steel, up $15 per ton compared to the last time we did an update on world prices and up $30 per ton over late-December. The theoretical spread between the world HR export price and the SMU HR price is $50 to $80 per ton ($150 prior to import costs), up $17 from our previous analysis and up $32 from late-December.
The $50 to $80 spread is $25 to $30 per ton more than what we have seen over the last few months. In January through May 2015 we had more narrow spreads, some negative (meaning theoretically that domestic steel was cheaper than foreign steel); in early February 2015 it was -$19 to $11 and was the lowest seen since late-May 2013. The widest spread seen between foreign and domestic HRC in 2015 was in mid-August at $42 to $72 per ton ($142 prior to import costs). One year ago the spread was $1 to $31 per ton ($101 prior to import costs).
In a quick spot check of foreign steel offers or orders placed within the past few days we found the price spread running from $335 to $360 per net ton delivered into a U.S. port. This is within the theoretical parameters we outlined above in our calculation.
Freight is an important part of the final determination on whether to import foreign steel or buy from a domestic mill supplier. Domestic prices are referenced as FOB the producing mill while foreign prices are FOB the Port (Houston, NOLA, Savannah, Los Angeles, Camden, etc.). Inland freight, from either a domestic mill or from the port, can dramatically impact the competitiveness of both domestic and foreign steel.
Below is a graph comparing world HR export prices against the SMU domestic HR average price. We also have included a comparison with freight and traders’ costs added which gives you a better indication of the true price spread. You will need to view the graph on our website to use it’s interactive features, you can do so by clicking here. If you need assistance with either logging in or navigating the website, please contact us at 800-432-3475 or info@SteelMarketUpdate.com.
Brett Linton
Read more from Brett LintonLatest in International Steel Prices
Domestic HR tags maintain slight premium over landed imports
Hot-rolled (HR) coil prices ticked back up in the US this week, while tags in offshore markets moved in varying directions. Thus, the price premium between stateside hot band and imports on a landed basis widened slightly. After leveling with import prices in late August, stateside tags have been mostly stable and ahead of imports […]
Domestic HR, offshore prices decline
US hot-rolled (HR) coil prices slipped this week, while tags in offshore markets were also largely down. Thus, the price premium between stateside hot band and imports on a landed basis was relatively unchanged.
US CR, import prices edge back down
The price spread between US-produced cold-rolled (CR) coil and offshore products slipped in the week ended Nov. 15, on a landed basis.
CRU: Sheet prices hit bottom in Europe, pressure in other markets
This CRU analysis from discusses steel sheet prices, demand, and inventory levels around the globe this past week.
Domestic HR tags tick up, import prices fall
US hot-rolled (HR) coil prices edged up this week, while tags in offshore markets moved lower. As a result, domestic tags pulled ahead of imports on a landed basis. Since becoming level with import prices in late August, stateside tags had been mostly stable, though they slowly drifted closer to parity over the past month. […]