The U.S. Department of Commerce released import license data earlier today, which indicates that January steel imports are trending slightly higher than December’s 2,475,249 tons. Right now, based on the first 16 days of data, January is trending toward a 2.5 million to 2.7 million net ton month. Semi-finished imports (slabs/billets), which are purchased by […]
Emotions are running hot as the market awaits President Trump’s decision on Section 232, and whether to impose new trade restrictions on steel imports for national security reasons. Sharply contrasting comments recently from Dan DiMicco and Richard Chriss serve to bookend both sides of the issue. DiMicco, the former CEO of Nucor and current trade […]
Emotions are running hot as the market awaits President Trump’s decision on Section 232, and whether to impose new trade restrictions on steel imports for national security reasons. Sharply contrasting comments recently from Dan DiMicco and Richard Chriss serve to bookend both sides of the issue. DiMicco, the former CEO of Nucor and current trade […]
Over the past six months, Steel Market Update has been canvassing flat rolled steel service centers as we try to better understand the number of months of supply being held as of the end of each month. Steel distributors now hold three months (3.03 month’s supply) based on the responses we have received from our […]
The Section 232 report on the effect of steel mill product imports on U.S. national security was submitted to President Trump by Secretary of Commerce Wilbur Ross late on Thursday, Jan. 11. The president now has 90 days to take action. Details of the report have not been released. In its announcement, the Commerce Department […]
Steel plate prices are rising as demand tightens and lead times lengthen. On Thursday of this past week, Steel Market Update published an article containing comments from steel buyers in both flat rolled and plate steel products. One comment sparked a discussion between one of the domestic steel mills and SMU (and indirectly with the […]
Apparent steel supply for the month of November totaled 8,723,547 net tons, according to the latest data from the U.S. Department of Commerce and the American Iron and Steel Institute. Apparent steel supply is calculated by adding domestic steel shipments and finished U.S. steel imports, then subtracting total U.S. steel exports. November apparent steel supply […]
The Section 232 report on the effect of steel mill product imports on U.S. national security was submitted to President Trump by Secretary of Commerce Wilbur Ross late on Thursday, Jan. 11. The president now has 90 days to take action. Details of the report have not been released. In its announcement, the Commerce Department […]
U.S. demand for steel sheet products continued to expand through November, according to Steel Market Update’s analysis of data from the American Iron and Steel Institute (AISI) and the U.S. Department of Commerce. Apparent supply is a proxy for market demand. Demand momentum for sheet products in total was negative in the three months through […]
Imports of rolled steel into the United States have been on the decline since peaking in July, based on a three-month moving average of government import data through the end of 2017. In three months through December compared to three months through September, total rolled steel imports declined by 16.8 percent, while sheet products dropped […]
In Q1 2018, long product imports increased by 9.5 percent compared to Q4 2017. Total long product imports were down by 150,000 tons per month year over year on a three-month moving average (3MMA) basis, but there was a turn for the worse in the first quarter, according to Steel Market Update’s analysis of federal […]
In Q1 2018, tubular product imports increased by 3.8 percent compared to Q4 2017. Total rolled steel imports increased by 3.6 percent, and tubular products by 3.8 percent, in the three months through March compared to three months through December 2017, but on a year-over-year basis tubulars were up by 20.2 percent, according to Steel […]
Premium subscribers to Steel Market Update receive reports on imports with macro data broken down by product on the national level. SMU also provides reports that detail the import tonnage received by district of entry and source nation. This new report from SMU takes the analysis even further. Using U.S. International Trade Commission (USITC) data, […]
This analysis breaks down the imported tonnage of six flat rolled products into the district of entry and the source country. We believe that misinformation (or lack of) about regional import volumes is often used to influence purchase decisions. Our intent with this analysis is to describe in detail what is going on in a […]
As we collected hot rolled, cold rolled, galvanized, Galvalume and plate prices earlier this week, we asked a number of questions trying to get reactions from the steel buyers. We asked how high steel prices could go (using hot rolled as the benchmark) and what were the key drivers affecting prices right now. Here are […]
The following article on the hot rolled coil (HRC) futures market was written by David Feldstein. As the Flack Global Metals Director of Risk Management, Dave is an active participant in the hot rolled futures market, and we believe he provides insightful commentary and trading ideas to our readers. Besides writing futures articles for Steel […]
Is the United States violating World Trade Organization rules with its trade remedy methodologies? Canada says yes and has filed a complaint with the WTO alleging that the United States’ use of antidumping and countervailing duties violates international trade law. Spurred by recent duties on paper, lumber and airplanes, Canada filed a complaint last month […]
The American Institute for International Steel reports that steel imports dropped sharply from October to November, falling below their year-ago level. The United States imported 2.76 million net tons of steel in November, 11.4 percent less than the preceding month and 1.6 percent less than the previous November. Imports from the three biggest suppliers of […]
Anticipation is building over the Commerce Department’s Section 232 report, which is finally due to the White House in the next few days. Will its recommendations to the president on trade action to protect the national security prove to be a bombshell or a bust? Proponents of new tariffs or quotas on steel imports have […]
Vietnam steelmakers are asking for government assistance in defending the industry from U.S. antidumping and countervailing investigations on galvanized and cold rolled steels. The Vietnam Steel Association (VSA) has requested that the Ministry of Industry and Trade intervene, including filing a suit with the World Trade Organization to counter Department of Commerce actions that it […]
The U.S. International Trade Commission issued its final affirmative determination of material injury regarding imports of cold drawn mechanical tubes from China and India. The decision triggers the imposition of countervailing duties assigned by Commerce on Dec. 5. The Commission did not find critical circumstances for tubes imported from China and, therefore, will not subject […]
“We have much work to do to reach an agreement that serves the economic interests of the American people. Our goals are clear: we must achieve fair and reciprocal trade between our two nations,” said Ambassador Robert Lighthizer during a meeting Jan. 5 with Korean representatives in Washington to advance talks on the U.S.-Korea Free […]
The Nucor Plate Group has increased transaction prices on all new orders for carbon, alloy and heat-treated plate by $50 per ton, effective immediately on any new or unconfirmed orders. Nucor’s Jan. 5 price hike follows on a $50 per ton increase announced Dec. 6 and a $40 per ton increase announced Nov. 15 on […]
Foreign steel imports into the United States were almost five million net tons greater during 2017 than what was reported for 2016. The 13 percent rise in imports was primarily due to higher semi-finished (slabs/billets) being shipped to the domestic steel mills (+1,773,805 net tons). In addition, oil country tubular goods (OCTG) rose by 2,267,574 […]
Chinese steel trade data was recently released for the month of November 2017, providing updated data on iron ore imports, scrap imports and flat rolled imports and exports. Chinese imports of iron ore in November totaled 94,540,000 metric tons, an increase of 18.9 percent from the previous month, and an increase of 2.8 percent from […]
Current and future sentiment among flat rolled steel buyers remains high as the New Year begins, much the same as at this time last year, according to the Steel Market Update Steel Buyers Sentiment Index. The SMU Steel Buyers Sentiment Index measures changes in buyers’ optimism levels, which offers insight into their likely decision-making. Three […]
Earlier today, Steel Market Update provided our “Flash Report” on flat rolled steel service center inventories to those distributors who are actively providing months of supply data to SMU. Our first Flash Report prompted three comments from the group that we would like to share with our readers: Service Center One: “This market is the […]
The U.S. economy overall has grown for 103 consecutive months, and the manufacturing sector for 16 months, based on the Institute for Supply Management’s latest survey of corporate purchasing executives. In December, ISM’s manufacturing PMI climbed 1.5 percentage points to 59.7, well above the reading of 50 that indicates growth. “This indicates growth in manufacturing […]
All four raw materials tracked by Steel Market Update— iron ore, scrap, coking coal and zinc—increased in price in December. From Australia News Digest on Dec.18: “Steelmaking raw materials made strong gains on Monday as Chinese mills, responsible for half the world’s steel output, restock ahead of the resumption of full production at the end […]
The growth of U.S. Gross Domestic Product in the third quarter of 2017 maintained the strong performance of the second quarter. On Dec. 20, the Bureau of Economic Analysis released the third estimate of GDP growth in the third quarter. Growth was reported to be 3.16 percent quarter-on-quarter and 2.3 percent year-on-year. At the end […]