2019 was a challenge for steel suppliers, with both demand and pricing on a downward slope for the first three quarters of the year. Although it’s still early, there are signs 2020 could prove to be a better year for the steel industry. Steel mills, and the service centers that process and distribute their products, […]
Steel Market Update’s analysis of flat rolled and plate inventories and shipments for the month of December: Flat Rolled = 62.9 Shipping Days of Supply Plate Steels = 60.4 Shipping Days of Supply Flat Rolled Service center flat rolled steel inventories increased 5.7 percent month on month while shipments fell 10.1 percent, according to adjusted […]
On Monday, we will begin our mid-January flat rolled and plate steel market trends questionnaire, and by the end of the week we will publish our analysis. Our Premium level members will be able to review our analysis, which will be presented in a PowerPoint presentation on Friday. Those who participate in this week’s questionnaire […]
Steel Market Update’s 31st Steel 101: Introduction to Steel Making & Market Fundamentals Workshop, set for Merrillville, Ind., on March 31 and April 1, is now taking registrations. We will be working out of the Hilton Garden Inn in Merrillville, a short drive away from the NLMK Portage steel mill, which we will tour on […]
Steel Market Update’s 31st Steel 101: Introduction to Steel Making & Market Fundamentals Workshop, set for Merrillville, Ind., on March 31 and April 1, is now taking registrations. We will be working out of the Hilton Garden Inn in Merrillville, a short drive away from the NLMK Portage steel mill, which we will tour on […]
The price of hot rolled steel topped the $600 per ton mark this week, cresting a psychological barrier that many saw as unreachable two months ago. Opinions are split on how much higher HR can go, and how long it can stay above the $600 level. Prices for all flat rolled products increased by another […]
The U.S. exported 601,290 tons of steel in November, according to final Census data, a 15 percent decrease from October and down 2 percent from the same month one year ago. This is the lowest level seen since June 2019. November exports were 3.5 percent below the 2019 average of 623,059 tons, and remain significantly […]
I spent today working on two projects. First was contacting and communicating with flat rolled and plate steel buyers in order to get a sense of the current spot price offers/transactions and where the markets are heading over the near term. The second project was working on the 2020 SMU Steel Summit Conference. As with […]
I spent today working on two projects. First was contacting and communicating with flat rolled and plate steel buyers in order to get a sense of the current spot price offers/transactions and where the markets are heading over the near term. The second project was working on the 2020 SMU Steel Summit Conference. As with […]
December’s licensed import volume for rolled steel products was the lowest since December 2009. Year over year, total rolled product imports in December were down by 27.8 percent on a three-month moving average (3MMA) basis. This follows the 27.4 percent decrease in November, 17.7 percent decrease in October and 15.5 percent decline in September on […]
Premium subscribers to Steel Market Update have reports available on our website that break out the import tonnage into district of entry and source nation for six sheet and plate product categories. This report takes the total national tonnage of hot rolled and breaks it down into product detail. Using U.S. International Trade Commission (USITC) […]
Lead times for coated steels and steel plate have extended a bit, but lead times for orders of hot rolled and cold rolled have seen little change in the past few weeks. Lead times for steel delivery are a measure of demand at the mill level. The longer the lead time, the busier the mill. […]
Negotiations between steelmakers and steel buyers were mixed in early January, depending on the product. Responses to Steel Market Update’s market trends questionnaire this week indicate that talks over price have tightened considerably for plate, while loosening slightly for hot rolled and cold rolled orders. In the hot rolled segment, the majority of buyers (56 […]
Ferrous scrap prices are up another $20-30/GT in January, on top of similar increases the prior two months, lending support to the finished steel price increases announced this week. Sources put January scrap prices around the following: Shred, $315-330; HMS, $270-275; Bush, $320; and Plate, $285- $310 per ton. Scrap prices typically rise in January […]
Flat rolled mills raised prices by another $40 per ton this week and the plate mills are expected to follow suit soon, possibly yet this week. “Lead times have jumped out to February-March-April. Scrap is up $20-30. The mills will certainly go for plate increase number four since November,” said one Steel Market Update source. […]
I was taking a deeper dive into some of the data compiled from last week’s flat rolled and plate steel market trends analysis. Having added about 50+ new companies to our survey, we now send invitations to 500+ individuals who actively participate in the flat rolled or plate steel markets. On purpose, we concentrate on […]
I was taking a deeper dive into some of the data compiled from last week’s flat rolled and plate steel market trends analysis. Having added about 50+ new companies to our survey, we now send invitations to 500+ individuals who actively participate in the flat rolled or plate steel markets. On purpose, we concentrate on […]
The uptrend in steel prices has continued into the New Year with flat rolled prices increasing by another $10-20 per ton. SMU’s Price Momentum Indicators continue to point higher for all steel products. Here is how we see prices this week: Hot Rolled Coil: SMU price range is $580-$600 per ton ($29.00-$30.00/cwt) with an average […]
At the end of August, Steel Market Update will host our 10th SMU Steel Summit Conference. Our conference will be the largest flat rolled and plate steel event in North America during this calendar year. The 2020 SMU Steel Summit Conference is going to be our best attended and most informative conference yet as 1,200 […]
At the end of August, Steel Market Update will host our 10th SMU Steel Summit Conference. Our conference will be the largest flat rolled and plate steel event in North America during this calendar year. The 2020 SMU Steel Summit Conference is going to be our best attended and most informative conference yet as 1,200 […]
For those of you who stretched out the Christmas, Hanukkah and New Year’s Holidays and are just returning to your offices – Happy New Year and welcome to the decade that promises to make the last 10 years look tame. Steel Market Update will return to our normal market analysis schedule this week, and we […]
First issue of the New Year. For that matter, today is the first issue of the new decade. It will probably take awhile to get used to 2020 vs. 2019. Of course, with the political climate and it being an election year, maybe we will have 2020 ingrained in our heads sooner rather than later. […]
Welcome back from the Christmas Holidays. This is the 149th Executive level issue of Steel Market Update produced during calendar year 2019. It is also anticipated to be the last Executive issue prior to the New Year. On Monday we will publish our last Premium issue of the year, our 49th for 2019. Christmas and […]
In four rounds of price increases since late October, flat rolled steel mills have raised prices by a total of $150 per ton. How much are they collecting? Some, but certainly not all, according to the service center and manufacturing executives who responded to Steel Market Update’s questionnaire this week. SMU data places the average […]
Happy Holidays! I expect this week to be a tad on the slow side as buyers and sellers of steel celebrate Hanukkah and Christmas. One year ago, benchmark hot rolled prices were averaging $745 per ton ($37.25/cwt), down from the cycle peak achieved the week of July 23, 2018, at $915 per ton ($45.75/cwt). Since […]
After a brief hesitation early in the month, mill lead times for spot orders of flat rolled steel have continued to increase. The latest data shows slightly longer lead times for all flat rolled products except for Galvalume. Plate lead times have extended, as well. Lead times for steel delivery are a measure of demand […]
Negotiations between steelmakers and steel buyers continue to tighten. Responses to Steel Market Update’s market trends questionnaire this week indicate the mills are slightly less flexible on price for most products as they work to collect four increases announced since late October totaling $150 per ton. In the hot rolled segment, the majority of buyers […]
By CRU Principal Analyst Matthew Watkins, from the Steel Sheet Products Market Outlook The European Green Deal for the EU was launched on Dec. 11 by the new European Commission. This is a strategy that aims both at achieving zero net emissions of greenhouse gases by 2050 and at managing the transition to that state […]
U.S. Steel tonight announced their intention of focusing their company on three core assets: Gary Works, Mon Valley Works and Big River Steel. This comment was made at the same time they announced their intention to idle a large portion of their Great Lakes Works near Detroit. WARN notices have been sent to the 1,500+ […]
Flat rolled steel and plate prices remained range-bound this week. The latest price moves by the domestic steel mills (+$40/ton on flat rolled) did not have time to move the needle and take prices higher. As we enter the Christmas and Hanukkah Holidays, we anticipate minimal spot trades over the next couple of weeks. SMU […]