• Skip to main content

    Market Data

    Rig Counts for US Flat While Canada Continues to Improve

    Written by Brett Linton


    According to Baker Hughes data from July 31, 2015, the U.S rig count for the week was 874 rigs exploring for or developing oil or natural gas. This is a decrease of 2 rigs when compared to last week, with oil rigs up 5 to 664 rigs, gas rigs down 7 to 209 rigs, and miscellaneous rigs unchanged at 1 rig. Compared to this time last year, the 874 count is down 1,015 rigs, with oil rigs down 909, gas rigs down 104, and miscellaneous rigs down 2.

    The decline in the drilling of new gas and oil wells is having a direct impact on the amount of line pipe, storage tanks, and OCTG that is being used by the energy sector. A good portion of these products come from hot rolled coil or plate substrate, and are reasons for both the short lead times on hot rolled and plate at North American steel producers and the falling steel prices we have seen going back to mid-2014. Prices have since stabilized for hot rolled coil but the product is having a difficult time breaking out of a very narrow trading range partially due to the weakness in the energy sector.

    Brett Linton

    Read more from Brett Linton

    Latest in Market Data

    pipe yard

    US rigs reach multi-year high, Canadian activity edges lower

    The latest count of active drilling rigs in the US rose, while activity eased in Canada this week, according to oil and gas rig count data published by Baker Hughes. The US rig count moved up to 607 rigs this week, reaching a 30-month high. Compared with this time last year, 53 more rigs are in operation today. Canada’s count slipped by two to 231 rigs this week, starting a bit of a seesaw pattern over the past five weeks. Activity is up from the same week of 2025, with 36 more rigs operating today.

    North American auto output rebounds in October

    North American auto assemblies rebounded 6.5% from September to 1.369 million units in October, driven by improved personal and commercial vehicle production, according to GlobalData. After steady gains through Q2, automotive production has been inconsistent, continuing a seesaw pattern, evident again last month. Still, assemblies remain muted and well below pre-pandemic levels. Total production was nearly even with October 2025, down 0.5% from a year earlier. Still, last month’s production total was 6.3% above 2026’s monthly average of 1.287 million units.

    AIA: Architecture billings remain weak in October

    Architecture firms continued to report declining billings in October, though commercial/industrial practices remained a brighter spot, according to the latest Architecture Billings Index (ABI) release from the American Institute of Architects (AIA) and Deltek. The October ABI stood at 44.9 (Figure 1), little changed from September’s 44.7, and indicating continued weakness in architecture business conditions. New project inquires increased again, but the pace of growth slowed from September. Meanwhile, the value of newly signed design contracts continued to decline, suggesting client interest has yet to translate into a sustained improvement in committed work.

    Demand index climbs, remains near 5-year high

    SMU’s Steel Demand Index rose two points to 66.5 in mid-November from 64.5 in mid-October. While it remains below a five-year high reached in mid-September, it is up 28 points from a reading of 38.5 a year ago. The result signals broadly improving flat-rolled steel demand, while buyer feedback points to strength in sectors such as data centers and border-wall construction. The index has been in expansion territory since late November 2025. Highly extended lead times, limited spot availability, mill outages, and historically reduced import competition continue to support domestic prices and apparent demand across the supply chain.