Steel Markets
AGC: Construction Jobs Outpace Available Workers
Written by Sandy Williams
October 18, 2019
Construction jobs increased in 39 states and the District of Columbia between September 2018 and September 2019, while construction employment increased in 28 states from August to September, according to an analysis by the Associated General Contractors of America of the latest Labor Department data.
“Although evidence is mounting that the overall economy is slowing, contractors in most states are still eager to hire,” said Ken Simonson, the association’s chief economist. “But they are unable to find qualified workers in some cases, and job openings in construction have soared as unemployment rates are at historic lows in many states.”
Texas added the most construction jobs over the year (52,000 jobs, 7.0 percent), followed by California (30,400 jobs, 3.5 percent), Arizona (16,500 jobs, 10.2 percent), Florida (16,200 jobs, 2.9 percent), and Nevada (11,100 jobs, 12.3 percent). Nevada added the highest percentage of construction jobs over 12 months, followed by Arizona, New Mexico (8.7 percent, 4,100 jobs), New Hampshire (7.8 percent, 2,100 jobs), Texas and Indiana (7.0 percent, 9,800 jobs). Construction employment reached a record high in Nebraska, Texas and Washington.
Eleven states shed construction jobs over the latest 12 months. Louisiana lost the largest number and percentage of construction jobs (-10,600 jobs, -7.0 percent). Other states with large job losses include Ohio (-7,600 jobs, -3.4 percent), Connecticut (-1,800 jobs, -3.1 percent), Tennessee (-1,300 jobs, -1.0 percent), Massachusetts (-1,200 jobs, -0.8 percent) and North Carolina (-1,200 jobs, -0.5 percent). Other states with a substantial percentage decline included Vermont (-6.0 percent, -900 jobs), Ohio, Montana (-3.4 percent, -1,000 jobs) and Connecticut.
Texas added the most construction jobs between August and September (7,200 jobs, 0.9 percent), followed by Arizona (2,200 jobs, 1.3 percent), Indiana (1,700 jobs, 1.1 percent), Wisconsin (1,700 jobs, 1.4 percent), Nevada (1,600 jobs, 1.6 percent) and Florida (1,500 jobs, 0.3 percent). Hawaii added the highest percentage of construction jobs for the month (2.7 percent, 1,000 jobs), followed by Idaho (2.2 percent, 1,100 jobs), Nevada, Arkansas (1.5 percent, 800 jobs), New Hampshire (1.4 percent, 400 jobs), and Wisconsin.
Construction employment decreased from August to September in 22 states and was flat in D.C. Virginia lost the largest number of construction jobs for the month (-3,200 jobs, -1.6 percent), followed by Ohio (-1,700 jobs, -0.8 percent), Pennsylvania (-1,500 jobs, -0.6 percent) and Missouri (-1,100 jobs, -0.9 percent). North Dakota had the largest percentage decline for the month (-3.2 percent, -900 jobs), followed by Virginia, Wyoming (-1.4 percent, -300 jobs) and Rhode Island (-1.0 percent, -200 jobs).
Sandy Williams
Read more from Sandy WilliamsLatest in Steel Markets
GrafTech’s Q2 loss widens in ‘challenging’ business environment
GrafTech cited a “challenging” part of the business cycle as its net loss widened in the second quarter.
CRU: Poor steel margins continue to push down raw material prices
Both iron ore and coking coal prices fell this week because of resistance from buyers. Iron ore prices have continued to fall throughout the past week, following sharp declines in steel prices in China, given no new policy announcement from the ‘Third Plenum’ meeting.
Op-Ed: The myth of the Mexican steel surge
We have heard ominous warnings about a flood of Mexican steel threatening the US market. It's the kind of rhetoric that gets thrown around often with little regard for the facts. The reality is that the Mexican steel surge is simply not happening, and the US steel industry has consistently maintained a significant trade surplus in finished products with Mexico. In 2023 alone, this surplus exceeded $3 billion.
CRU: Demand weakness continues to weigh on global sheet markets
Demand has remained persistently weak across the globe for sheet steel, weighing on prices. US HR coil prices fell the furthest this week as high-volume, low-priced deals were transacted as mills looked to fill order books and competed with one another amid relative demand weakness. Meanwhile, European prices were also down due to low demand […]
Influx of coated products fuels recent import surge
Steel imports fell back in May from April’s recent high but remained elevated compared to the levels seen over the past year. A deeper dive into the data confirms what SMU has been hearing from sources: Coated sheet is driving the recent rise in overall import levels.