January heating and cooling equipment shipments totaled 1.86 million units, up 2.8% from December and up 18.9% from levels one year prior, according to recent data from the Air-Conditioning, Heating, and Refrigeration Institute (AHRI). This is the eighth consecutive month that shipments have increased on a year-over-year basis. Recall that late-2020 saw record-high levels of […]
General Motors continues to crank out some full-size pickup trucks despite a microchip shortage. The Detroit-based automaker is doing so by shipping certain vehicles without chip-containing components necessary for reducing fuel consumption, a company spokesman confirmed. “Due to the global shortage of semiconductors impacting the global auto industry, we are making Active Fuel Management/Dynamic Fuel […]
Reducing carbon isn’t just something that steel wants to do to be a good corporate citizen, it’s increasingly something that key customers – such as automakers – are demanding. Case in point: German automaker BMW is investing in a CO2-free steel production process developed by Boston Metal, a U.S.-based start-up. Boston Metal has found a way […]
February heating and cooling equipment shipments declined 9.3% from January to 1.68 million units, but were up 10.4% from levels one year prior, according to recent data from the Air-Conditioning, Heating, and Refrigeration Institute (AHRI). This is the ninth consecutive month that shipments have increased on a year-over-year basis. Recall that late 2020 saw record-high […]
Construction employment continues to lag pre-pandemic levels in most of the U.S., says a new analysis by the Associated General Contractors of America. Only eight states added construction jobs from February to January 2021 while 42 states remained below February 2020 levels. “Despite improvement in many sectors of the economy, nonresidential contractors are coping with […]
Steel Market Update’s monthly analysis of Key Market Indicators–a host of data on the economy, raw materials, manufacturing, construction, and steel sheet and long products–shows that the marketplace continues to improve, albeit cautiously. At the onset of COVID-19 a year ago, the impact of the pandemic on the economy was delayed, with only 3 of […]
Editor’s note: Steel Market Update is pleased to share this Premium content–an edited version of our Key Market Indicators analysis–with Executive members. For information on how to upgrade to a Premium-level subscription, email Info@SteelMarketUpdate.com. Steel Market Update’s monthly analysis of Key Market Indicators–a host of data on the economy, raw materials, manufacturing, construction, and steel […]
Flat Rolled = 42.7 Shipping Days of Supply Plate = 46.6 Shipping Days of Supply Flat Rolled Flat rolled inventories at service centers edged up in February, largely because of lower shipments caused by harsh winter weather. Flat rolled inventories represented 42.7 shipping days of supply or 2.14 months of supply at the end of […]
In Sunday night’s issue of Steel Market Update, I discussed the increase in the days of inventory on order at the service centers. The increase can be attributed to extended lead times, late deliveries and perhaps some double ordering from the distributors’ end-user customers. We saw an increase in the percentage of inventory that is […]
By CRU Senior Analysts Ryan Smith and Ryan McKinley, from CRU’s Steelmaking Raw Materials Monitor Steel Market Update is pleased to share this Premium content with Executive members. For information on upgrading to a Premium-level subscription, email Info@SteelMarketUpdate.com. The need for virgin iron units in the U.S. market is rising as new electric-arc furnace (EAF) […]
By CRU Senior Analyst Ryan McKinley from CRU’s Steel Metallics Monitor The CRU metallics price indicator (CRUmpi) rose by 14.4% m/m in March to 354.4, bouncing back above levels seen in January. China’s return to the steel market following New Year holiday celebrations there helped lift steel and scrap prices in Asia, while seasonally constrained […]
The semiconductor shortage that forced General Motors to extend assembly plant outages continues to impact production at other North American automakers as well. Case in point: Toyota’s Tundra pickup truck assembly plant in San Antonio, Texas, where it’s not clear how long the production disruption might last. The chip shortage been an issue for Toyota […]
The construction industry remains optimistic despite still facing many challenges resulting from the COVID-19 pandemic. Out of 1,400 contractors responding to the Associated General Contractors of America’s Coronavirus Survey, 62% said they plan to add employees this year. A bullish perspective typical of the construction industry, said AGC Chief Economist Ken Simonson. “No matter how bad […]
I am going to spend some time discussing Steel Market Update this evening. I started SMU in August 2008 as a one-man show. The company has grown over the years both in size and scope. The sale of the company to CRU has turned out to be a blessing (I think for both companies), and […]
Service centers reported lower shipments during the month of February partially due to the harsh winter weather associated with “Snowmageddon.” Steel Market Update’s proprietary service center inventories and shipments report indicated 42.7 days of flat rolled inventories, which is up from 40 days of supply on hand at the end of January. Plate inventories stood […]
The PRO Act (Protecting the Right to Organize Act) will begin debate in the U.S. House this week. The legislation, voted down in previous years, would change long-established labor laws that not everyone believes will benefit employees and the industries in which they work. Among those critical of the legislation is the Associated General Contractors […]
A couple weeks back we were beginning to think the rise in spot prices would soon slow and we were close to a tipping point. We no longer have that opinion due to Snowmageddon, the winter storm that exacerbated the already late deliveries out of multiple steel mills. On top of that, we are seeing […]
Steel Buyers Sentiment, as measured by Steel Market Update, has seen little change since the beginning of February, recording a very optimistic reading of +69 this week. Future Sentiment moved up four points to a nearly as bullish +67. Both Current and Future Sentiment now exceed pre-pandemic levels and suggest that the market is hopeful […]
Severe weather froze the construction industry in February, contributing to an employment loss of 61,000 workers, said the Associated General Contractors of America in an analysis of government data. The sector’s unemployment rate soared 9.6% last month. Total construction employment was 7,340,000, a 4.0% drop from the most recent peak in February 2020. “The steep decline […]
The Dodge Momentum Index jumped 7.1% in February to register 149.0 for the highest level in nearly three years. The index is a monthly measure of the first report of nonresidential projects in planning, shown to lead construction spending by a full year. A surge of large projects entered the planning phase last month, said […]
It took 20 years, but the nation’s infrastructure GPA is no longer in the D range. The 2021 Report Card issued by the American Society of Civil Engineers gives America’s infrastructure a C-, a passing grade that still leaves plenty of room for improvement. Rail transit was the brightest spot in this year’s report, receiving […]
Last week, we conducted one of our flat rolled and plate steel market trends analyses. Or, to put it another way (that the search engines don’t like), we conducted one of our surveys that we do ever other week. We invited over 500+ market participants, most of whom are steel buyers in the manufacturing and […]
General Motors has extended production shutdowns at three North American plants because of a continuing microchip shortage. In addition, the automaker said it would take downtime at its Gravatai plant in Brazil. “Our intent is to make up as much production lost at these plants as possible,” a GM spokesman said on Wednesday, March 3. […]
You Can’t See the Forest for the Trees Mill lead times have surged over the past couple of weeks, which I believe is a result of Snowmageddon in Texas and other areas of the Southeast. When you look at our lead time graphics, you need to remember we are gathering data from our flat rolled […]
Tomorrow (Wednesday), we will host one of our SMU Community Chat Webinars with Rick Preckel of Preston Pipe and Michael Cowden of SMU. The two will discuss the energy segment and how higher oil prices will impact oil well drilling, use of line pipe and other OCTG products, and how quickly we may see demand […]
Nonresidential construction spending expanded for the first time in seven months, according to a new analysis of January federal construction data by the Associated General Contractors of America. Total construction spending was $1.52 trillion in January, up 1.7% from December and 5.8% from January 2020. Combined private and public nonresidential construction spending climbed 0.9% from […]
The semiconductor shortage that has forced North American automakers to temporarily halt production at some assembly plants has spilled into the home appliance industry as well. The situation is severe enough that the Association of Home Appliance Manufacturers (AHAM), a lobbying group, has warned about potential re-allocations of semiconductors from that sector to others. There […]
There has been much said about the squeeze on supply of flat rolled and not as much about demand. Demand has been quite good in all sectors except the energy sector, which has been struggling for a couple of years due to prices that went below $40 per barrel. Now we are seeing warning signs […]
President Joe Biden has signed an executive order officially implementing a U.S. supply chain review for critical products such as semiconductors – a lack of which has led to widespread automotive production outages. “Recent shortages of automotive semiconductor chips have forced slowdowns at car manufacturing plants, highlighting how shortages can hurt U.S. workers,” the White House said […]
Sales of newly constructed single-family homes leapt 4.3% in January to a seasonally adjusted annual rate of 923,000, said the U.S. Census Bureau and HUD. Sales compared to a year ago soared 19.3%. “Historically low mortgage rates and solid demand spurred an increase in new home sales in January, with the sales pace more than 19% […]