Domestic hot-rolled coil (HRC) continues to hold the upper hand over imported steel when it comes to price, according to Steel Market Update’s latest foreign versus domestic price analysis. US HRC is approximately 4–7% cheaper than foreign prices this week, after consideration of freight costs, trader margins and any applicable tariffs. Prior to this week, […]
Hot-rolled coil (HRC) imports offer no cost advantage over domestic steel this week, according to Steel Market Update’s latest analysis. Domestic HRC prices are now approximately 1-3% cheaper than foreign steel, after consideration of freight costs, trader margins and any applicable tariffs. Although down, the relationship between foreign and domestic prices has remained within $18 […]
Foreign hot-rolled coil (HRC) imports offer little to no cost advantage over domestic steel at this time, according to Steel Market Update’s latest analysis. After taking freight costs, trader margins and tariffs into consideration, HRC imported from Germany and Italy are theoretically more expensive than domestic steel, and Far East Asian HRC offers just a […]
The strong performance of SSAB Americas was a bright spot in Swedish parent company SSAB’s third quarter earnings report as the company’s European segment was impacted by weaker demand and low shipments. SSAB Americas posted Q3 operating profit of SEK 3,036 million (US$276.65 million) — a 61% improvement from the same quarter of 2021. The […]
This week, foreign hot-rolled coil (HRC) offers little to no cost advantage over domestic steel, according to Steel Market Update’s latest analysis. Foreign prices now hold a theoretical discount of 0–1% over domestic steel, after adjusting foreign prices for estimated freight costs, trader margins, and tariffs. This relationship has teetered back and forth lately, with […]
By CRU Senior Analyst Ryan McKinley, from CRU’s Steel Sheet Products Monitor Sheet prices took split paths between eastern and western regions. Prices in Asia found support from restocking in China and supply disruptions in South Korea. Meanwhile, western markets remained weak, and we expect this to persist over the near term. October is the […]
The US and European Commission (EC) plan to accelerate global steel discussions in the coming weeks. US Trade Representative Katherine Tai and EC Executive Vice President Valdis Dombrovskis met last week in Washington to discuss ways to strengthen the trading and economic relationships between the two regions, Tai’s office said. Tai and Dombrovskis discussed the role […]
The price advantaged once offered by foreign hot-rolled coil (HRC) over domestic steel is gone, according to Steel Market Update’s latest foreign versus domestic price analysis. Foreign prices are now higher than domestic prices after adjusting for freight costs, trader margins, and tariffs. Domestic HRC is priced as much as 2% below current foreign prices. The gap between US and foreign […]
The temptation to purchase foreign hot-rolled coil (HRC) at a bargain has all but faded again, with adjusted foreign prices now offering little or no advantage over domestic steel, according to Steel Market Update’s latest analysis. After taking freight costs, trader margins and tariffs into consideration, foreign HRC prices for two of the three regions […]
The appeal to import foreign hot-rolled coil (HRC) in place of purchasing domestic steel remains low to non-existent, but that may be changing, according to our latest foreign versus domestic price analysis. Foreign prices were flat to down as much as $40 per net ton this week, while domestic prices increased $5 per ton. Foreign […]
Foreign steel imports from two of the three regions tracked by Steel Market Update no longer have a price advantage over domestic steel. US HRC prices are potentially 5% cheaper than imported steel from the two regions, according to our latest foreign versus domestic hot-rolled steel price analysis. Foreign HRC prices for just one region […]
By CRU Research Analyst Rosy Finlayson, from CRU’s Steelmaking Raw Materials Monitor European scrap prices remained relatively unchanged month-on-month (MoM) in September. Buying activity has been slow after the summer holidays despite this being the normal restocking period. Finished steel mills are reportedly sufficiently stocked at present. Scrap prices in Europe now range between €300 […]
Foreign steel imports from two of the three regions tracked by Steel Market Update have lost their price advantage over domestic steel, according to our latest foreign versus domestic hot-rolled steel price analysis. After taking freight costs, trader margins and tariffs into consideration, foreign HRC prices for just one region remain cheaper than domestic steel […]
Natural gas inspired staggering energy prices crush primary aluminum economics The suspension of gas deliveries through the Nord Stream pipeline has further aggravated an already grim energy situation for European aluminum producers. Prices for day-ahead power in Western Europe are stunning in their magnitude: 404 euros/megawatt hour were published on Friday for Germany, France, the […]
Foreign hot-rolled coil imports have very little (if any) price advantage over domestic steel prices at this time, according to SMU’s latest analysis. In fact, German HRC prices are more expensive than domestic steel after taking freight costs, trader margins and tariffs into consideration. Prices in Italy and in Asia hold only a 1–3% potential […]
ArcelorMittal has announced the idling of furnaces across Europe, including blast furnace A at its steel works in in Asturias, Spain, multiple facilities in Germany, and the blast furnace at its mill 2 in Dunkirk, France. According to the Luxembourg-based company, blast furnace A in Asturias will be shut down by the end of September. Blast […]
The temptation to purchase foreign hot-rolled coil (HRC) at a discount over domestic steel remains minimal. Adjusted foreign prices now offer little advantage over domestic steel, according to Steel Market Update’s (SMU) latest analysis. After taking freight costs, trader margins, and tariffs into consideration, foreign HRC prices for the three regions covered in this analysis […]
The temptation to purchase foreign hot-rolled coil (HRC) at a bargain has all but faded, with adjusted foreign prices now offering little or no advantage over domestic steel, according to Steel Market Update’s latest analysis. After taking freight costs, trader margins and tariffs into consideration, foreign HRC prices for two of the three regions covered […]
Foreign steel imports from the three regions tracked by Steel Market Update have all but lost their price advantage over domestic steel, according to our latest foreign versus domestic hot rolled steel price analysis. After taking freight costs, trader margins and tariffs into consideration, foreign HRC prices for one region are more expensive than domestic […]
Steelmakers stand firm in the face of Russian aggression The invasion of Ukraine led to a sharp and sudden decline in steel production as steelmakers hurried to idle their assets in the face of military aggression. In the weeks that followed, some of these producers restarted their facilities – albeit at reduced capacity utilization. As […]
The temptation to purchase foreign hot-rolled coil (HRC) at a bargain remains low, with adjusted foreign prices now within $40 per ton of domestic steel, according to Steel Market Update’s latest analysis. For the past three months, the potential discount on imported products has been shrinking. After taking freight costs, trader margins and tariffs into […]
The appeal to purchase foreign hot-rolled coil (HRC) further faded this week, with foreign prices now in close quarters to domestic steel, according to Steel Market Update’s latest analysis. Since mid-May, US steel prices have generally declined at a faster rate than foreign prices, meaning the potential discount on imported products has been shrinking for […]
Foreign hot-rolled steel imports have all but lost their appeal this week and are now at levels comparable to domestic steel prices, according to Steel Market Update’s latest analysis. Since mid May, US steel prices have generally declined at a faster rate than foreign prices, meaning the potential discount on imported products has been shrinking […]
The appeal to import cheaper foreign hot-rolled coil (HRC) instead of domestic steel continues to lessen, according to Steel Market Update’s latest foreign versus domestic price comparison. For the past two months, domestic steel prices have generally declined at a faster rate than foreign prices, meaning the potential discount on imported products has been shrinking. After […]
By CRU Senior Analyst Puneet Paliwal, from CRU’s Steel Metallics Monitor on July 14 The CRU metallics price indicator (CRUmpi) registered its third consecutive double-digit percentage decline in July, falling by 18.5% month over month (MoM) to 313.9, its lowest value since February 2021. Bearish sentiment in the metallics market, prevalent since May, has been […]
The appeal of foreign hot rolled coil (HRC) over domestic steel is slowly diminishing, according to SMU’s latest foreign versus domestic HRC price comparison. Between mid-April and late May, foreign steel prices generally declined at a faster rate than domestic prices, resulting in greater potential discounts on imported products. Now, domestic prices are declining at a faster […]
By CRU Senior Analyst Ryan McKinley, from CRU’s Steel Sheet Products Monitor Prices for sheet products continued to fall rapidly around the globe this week. Mills in the US have become increasingly aggressive with their offers and are shifting their focus towards value-added products in order to obtain higher margins over costs. As a result, […]
The temptation to purchase foreign hot rolled coil (HRC) over domestic steel is beginning to ease, according to SMU’s latest foreign versus domestic HRC price comparison. Foreign products now hold potential discounts of 9-15% over domestic steel, versus savings of 12-26% one month ago. Between mid-April and late May, foreign steel prices generally declined at […]
The temptation to purchase foreign hot rolled coil (HRC) over domestic steel remains high, but imports are not as competitive as they had been, according to SMU’s latest foreign versus domestic HRC price comparison. Between mid-April and late May, foreign steel prices generally declined at a faster rate than domestic prices, resulting in greater potential discounts on imported […]
The European Union is adjusting its steel safeguard measures, according to a document filed at the World Trade Organization. The EU’s safeguard instrument is entering its fifth year of application. The liberalization rate, which is meant to progressively allow more import competition into the market while the domestic industry adjusts to it, had previously been […]