Steel production for the week ending May 26 totaled 1,789,000 net tons, a 4.1 percent increase from the same period last year, and up 0.8 percent from the previous week. The mill capability utilization rate for the May 26 week averaged 76.3 percent, up from 75.7 percent the prior week and 73.7 percent the prior […]
Flat rolled and plate prices had yet another mixed week, according to the latest comparison of leading price indices. Steel Market Update’s hot rolled average increased by $20 to $900 per ton, while Platts’ hot rolled price was unchanged at $890 per ton. SMU’s cold rolled average fell $5 to $1,005 per ton, while Platts […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel As of the end of January 2018, HR spot is up over $200/ST. Thus far in May, HR spot is hovering […]
Based on the latest license data from the U.S. Department of Commerce reported earlier this week, we are expecting the trend for May steel imports to total 2.5 million to 2.6 million net tons. We continue to see strength in plate imports, in both coil and sheet. Finished imports are trending toward 2.1 million net […]
A large manufacturing company that buys a tremendous amount of hot rolled in the spot markets explained to SMU what they were seeing out of the domestic steel mills this week: “The market is relatively calm at the moment. Steel prices have been hovering in the same range for the last four to five weeks. […]
Steel production for the week ending May 19 totaled 1,775,000 net tons, a 3.3 percent increase from the same period last year, and up 1.6 percent from the previous week. The mill capability utilization rate for the May 19 week averaged 75.7 percent, up from 74.5 percent the prior week and 73.7 percent the prior […]
Flat rolled prices increased slightly on most products this past week, according to the steel price indexes followed by Steel Market Update. Plate prices were seen as being slightly lower than what was published one week ago. Benchmark hot rolled has been relatively stable over the past few weeks. SteelBenchmarker, which only publishes prices twice […]
The following calculation is used by Steel Market Update to identify the theoretical spread between foreign hot rolled steel import prices (delivered to USA ports) and domestic (USA) hot rolled coil prices (FOB Domestic mills). We want our readers to be aware that this is only a “theoretical” calculation as freight costs, trader margin and […]
The following article on the hot rolled coil (HRC) futures market was written by David Feldstein. As the Flack Global Metals Director of Risk Management, Dave is an active participant in the hot rolled futures market, and we believe he provides insightful commentary and trading ideas to our readers. Besides writing futures articles for Steel […]
Foreign steel imports for May are trending toward a 2.3 million net ton month, based on the data released by the U.S. Department of Commerce earlier this week. April imports were just shy 4.0 million net tons. In the graphic below, we are tracking the license rate for the first two weeks of a month […]
Flat rolled steel prices were mixed again this week. Benchmark hot rolled saw erosion at the low end and a slight increase at the top end of our range. The net result being HRC is unchanged compared to one week ago. Other products saw similar adjustments with most averages being close to where they were […]
March apparent steel supply rose 13.2 percent over February to 9,935,479 net tons, according to the latest data from the U.S. Department of Commerce and the American Iron and Steel Institute. Apparent steel supply is calculated by adding domestic steel shipments and finished U.S. steel imports, then subtracting total U.S. steel exports. This is the […]
Flat rolled and plate prices had yet another mixed week as there seems to be a semblance of balance in the flat rolled side of the market, while plate customers wait for new pricing. Hot rolled prices were essentially unchanged with Steel Market Update’s average remaining at $880 per ton ($44.00/cwt). Platts moved their average […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel HR futures markets continue to adjust to the continually changing narrative on global trade. While flat rolled steel demand has remained […]
This analysis breaks down the imported tonnage of six flat rolled products by district of entry and source country. Our intent is to describe in detail what is going on in a company’s immediate neighborhood and thus provide a negotiating advantage for Steel Market Update subscribers. Premium members will find reports here on our website […]
U.S. steel exports in March totaled 868,854 net tons (788,212 metric tons), up 7.9 percent from the month before, but down 8.4 percent from March 2017. Total exports have averaged 800,000-820,000 tons over the last few months. The total March export figure is above the three-month moving average (average of January 2018, February 2018 and […]
Flat rolled and plate steel prices were mixed in what has to be considered yet another quiet week for pricing. Steel buyers have mixed feelings as to where steel prices go from here, with some believing prices have no place to go but up and others looking at the HRC futures market (which is backwardated) […]
SMU’s flat rolled steel Price Momentum Indicator is currently pointing at Neutral meaning sheet steel prices are in transition or have hit a lull. A Neutral reading does not mean flat rolled steel prices will automatically move lower from here just because the previous indication was for higher prices. The injection of the U.S. government […]
Ferrous scrap prices have declined a bit in May, reported Steel Market Update sources, due to weakness in the export market and warmer spring weather that aided scrap collection and boosted supplies. Looking ahead to June, sources expect further change, but they disagree on the degree and direction. In the Ohio Valley, prices declined, but […]
Steel production for the week ending May 5 totaled 1,779,000 net tons, a 3.5 percent increase from the same period last year, and up 1.4 percent from the previous week. The mill capability utilization rate for the May 5 week averaged 75.9 percent, up from 74.8 percent the prior week and 73.7 percent the prior […]
Steel production for the week ending May 12 totaled 1,747,000 net tons, a 1.7 percent increase from the same period last year, but down 1.8 percent from the previous week. The mill capability utilization rate for the May 12 week averaged 74.5 percent, down from 75.9 percent the prior week but up from 73.7 percent […]
Total rolled steel product imports in April were the highest since last June and semi-finished imports were the highest since October 2014 as offshore mills hurried to ship steel ahead of the tariffs that were expected to take effect May 1. Total rolled steel product imports in April were up by 17.0 percent from March’s […]
Last week Steel Market Update conducted our early May 2018 flat rolled and plate steel market trends survey. We sent invitations to 640 individuals representing approximately 620 companies mostly located in the United States and Canada. The purpose of our inquiries is to better follow various trends affecting the flat rolled and plate markets. We […]
Flat rolled steel prices continued their mixed ways for about the fourth week in a row. Steel Market Update and Platts both saw benchmark hot rolled as up slightly and the two indexes are now $1 per ton apart in their assessment of the HRC market average. SteelBenchmarker did not report prices this past week. […]
The following article on the hot rolled coil (HRC) futures market was written by David Feldstein. As the Flack Global Metals Director of Risk Management, Dave is an active participant in the hot rolled futures market, and we believe he provides insightful commentary and trading ideas to our readers. Besides writing futures articles for Steel […]
February and its 2.477 million tons of foreign steel imports seems like a long way off, based on the new license data released by the U.S. Department of Commerce earlier this week. According to the license data, April is trending to come in just shy of 4 million net tons (3,879,350 tons). Semi-finished steels are […]
Flat rolled and plate steel prices continue to show signs of stability as the market absorbs the most recent decision on Section 232 exclusions (countries) and awaits decisions about individual product exclusions. Steel Market Update continues to reference our SMU Price Momentum Indicator as being at Neutral, but I want to warn our readers that […]
While some mills claim capacity utilization above 90 percent, the industry overall averaged less than 76 percent in the first four months of the year, according to the weekly raw steel production data reported by the American Iron and Steel Institute. The peak capacity utilization was 78.7 percent in the first week of March. Domestic […]
Total raw steel production for the month of March was 8,084,427 net tons, the highest production level since October 2014 when 8,147,661 tons were produced. The production method breakdown was 5,578,866 tons produced by electric arc furnaces (EAFs) and 2,505,561 tons produced by blast furnaces. March raw steel production was 818,072 tons or 11.3 percent […]
Steel Market Update’s scrap sources expect ferrous scrap prices to drop by at least $10-$20 per ton in May, and possibly as much as $30-$40 per ton, as spring weather increases the scrap flows and boosts supply. Adding to the downward pressure on prices, they report, is weakness in the global market. One dealer in […]