Global manufacturing activity sank into contraction in May. The JP Morgan Global Manufacturing PMI slipped to 49.8 last month for its lowest level since October 2012. International trade concerns dampened new export orders, which fell for the ninth month in a row. Business optimism fell to a level not seen since October 2012. Said JP Morgan […]
The Steel Market Development Institute (SMDI), a business unit of the American Iron and Steel Institute (AISI), presented awards for achievement and service to the North American steel industry at the institute’s General Meeting in Washington this week. Recipients were Dr. Grant Thomas of AK Steel, Eric Petersen, formerly of AK Steel, and Edward Pleet […]
Steel Market Update’s Steel Buyers Sentiment Index dipped below the +50 mark and continued to erode last month as the uncertainty over tariffs and trade had a negative effect on buyers’ attitudes. With OEM and service center executives feeling less positive about their prospects for the next few months, as indicated by SMU Future Buyers […]
By CRU Principal Economist Lisa Morrison During the last two years, we have become somewhat accustomed to waking up to some fresh, new policy idea of the Trump administration, disseminated via presidential tweet. However, the levying of tariffs on Mexican imports, as punishment for Mexico allowing Central American migrants to traverse their country in order […]
With prime steel prices continuing to slide, market conditions for distributors of secondary steel are a bit discouraging. The cheaper the prime products, the less incentive for buyers to seek out deals on nonprime material. Nonprime or secondary steel includes coils that are rejected because they failed to meet the specifications for their original use, […]
Manufacturing in May grew at its slowest pace in two and a half years amid trade tensions and slower demand, reports the Institute for Supply Management. The PMI for the Manufacturing ISM Report on Business decreased 0.7 percentage points from April to a reading of 52.1 percent. The index for new orders gained one percentage […]
The American Iron and Steel Institute’s (AISI) Board of Directors today welcomed two new directors — Michael McQuade, Algoma Steel Chief Executive Officer, and Ed Ramsey, Regional President-North America for Harsco Metals and Minerals. “Michael McQuade and Ed Ramsey are tremendous ambassadors for the steel industry, and I am excited to welcome them to the […]
The Conference Board’s measure of consumer confidence in May was the highest since last November. This is quite a volatile indicator; therefore, we prefer to smooth the data with a moving average to reduce monthly volatility. The composite value of consumer confidence in May was 134.1 with a three-month moving average (3MMA) of 129.2. The […]
China’s crude steel production in April exceeded an annualized rate of one billion tons for the first time as the Asian giant continues to grow its global market share, according to Steel Market Update’s analysis of the latest World Steel Association data. On March 27, the OECD Steel Committee reported: “Low growth prospects for the […]
Promises of steel tariff relief were short-lived for Mexico as President Trump’s latest tariff move adds new penalties and dashes hopes for quick ratification of the USMCA. Trump announced on Thursday that 5 percent tariffs will be imposed June 10 on all Mexican goods, including steel, until such time that Mexico stops the influx of […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: President Trump announced his intention to impose new tariffs on imports from Mexico on Thursday afternoon. Beginning June 10, 5 percent tariffs will be imposed on all imports of goods from Mexico. On the first of July, the […]
Metalforming companies are expecting a downward trend in business conditions for the next three months, according to 119 metalforming companies surveyed by the Precision Metalforming Association. The PMA Business Conditions Report for May shows only 19 percent of those surveyed expected economic activity to improve. About 24 percent expected orders to decline, an increase from […]
The MNI Chicago Business Barometer gained 1.6 points in May to register 54.2. Survey responses showed softening in both manufacturing business activity and confidence. The three-month average for the Index slipped to a two-year low, said MNI Indicators. Production and new orders rose in May, but not enough to make up for weaker levels in […]
The chairman of Mexican steel producer Altos Hornos de Mexico SAB was arrested on Tuesday in an anti-corruption probe, resulting in the freezing of AHMSA accounts and a possible disruption to steel production in Mexico. The investigation involves the sale by AHMSA of an idled fertilizer plant in 2014, allegedly worth $50 million, to oil […]
By CRU Principal Analyst Josh Spoores In the U.S. Midwest market, sheet prices have continued to decline on increased domestic, and now North American, supply. In addition to rising supply, falling scrap costs have also allowed EAF-based mills to remain competitive at these lower prices. It has now been one week since Canada and Mexico […]
Chinese steel trade data was recently released for the month of April 2019, providing updated data on iron ore imports, scrap imports, and flat rolled imports and exports. Chinese imports of iron ore in April totaled 80,770,000 metric tons, a decrease of 6.5 percent from the previous month, and a decrease of 2.6 percent from […]
SMU contributor Gaurav Chhibbar is a partner at Metal Edge Partners, a firm engaged in Risk Management and Strategic Advisory. In this role, he and his firm design and execute risk management strategies for clients along with providing process and analytical support. In Gaurav’s previous role, he was a trader at Cargill spending time in […]
Crude steel production worldwide increased by 6.4 percent in April, compared with April 2018, totaling 156.7 million metric tons, reported the World Steel Association in Brussels. WSA members represent about 85 percent of global steel production. China led the increase with crude steel production of 85 million tons, a jump of 12.7 percent from April […]
ArcelorMittal announced it will make another cut to European production levels due to weak demand and high import levels in the region. Primary steelmaking will be reduced at facilities in Dunkirk, France, and Eisenhüttenstadt, Germany. Production at the facility in Bremen, Germany, will be reduced during the fourth quarter as well as extending planned furnace […]
United Steelworkers International President Leo Gerard will retire after 50 years of service. Gerard began his association with the USW as a union staff representative and ultimately became a District Director, the National Director for Canada, International Secretary-Treasurer and finally in 2001 the USW’s International President. Gerard was a constant and strong voice for the […]
Strong and healthy competition has always existed between the steel and aluminum industries as each vies to capture and retain market share through innovation, advertising, pricing and other strategies. However, beyond this story of upstream competition, both materials are integral to a wide range of manufactured products and are widely purchased, fabricated and distributed by […]
Trade tensions with China and a slower economy took a toll on durable goods orders in April. Orders fell 2.1 percent in April to a seasonally adjusted $248.4 billion, reported Commerce. April’s data includes a revision for March new orders to $506.2 billion from $508.5 billion. Civilian aircraft led last month’s decline, plummeting 25 percent […]
The following calculation is used by Steel Market Update to identify the theoretical spread between foreign hot rolled steel prices (delivered to U.S. ports) and domestic hot rolled coil prices (FOB domestic mills). We want our readers to be aware that this is only a “theoretical” calculation as freight costs, trader margin and other costs […]
Altos Hornos de Mexico (AHMSA) plans to increased steel production by 30 percent now that U.S. tariffs have been eliminated. The year-long Section 232 measures caused a 25 percent drop in AHMSA’s steel production and $300 million in lost revenue, said AHMSA President Alonso Ancira Elizondo. As orders from the U.S. fell due to the […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel The hot rolled steel market remains cautious but optimistic with domestic producer prices coming in at even larger discounts to foreign […]
U.S. gross domestic product grew in every region of the country in all four quarters of 2018, according to Bureau of Economic Analysis data. The BEA introduced a new data set for GDP by state and region in 2014 and backdated it to Q1 2005. This week, the data was updated through Q4 2018. Even […]
In this report, we examine the change in currency values of the 16 pre-eminent global steel and iron ore trading nations. The currencies of these 16 don’t necessarily follow the broad index value of the U.S. dollar. In fact, at any given time, some are always moving in the opposite direction. The latest value of […]
Last year, the number of companies reporting new reshoring and foreign direct investment (FDI) jumped by 38 percent over 2017, accounting for 145,000 new jobs in the U.S. The total number of manufacturing jobs brought to the U.S. from offshore is now over 757,000 since the manufacturing employment low of 2010, reports the Reshoring Initiative, […]
Demand for long products and tubular goods have shown strong growth, but sheet products are declining. This analysis by SMU staff is based on data from the American Iron and Steel Institute (AISI) and the U.S. Department of Commerce (DoC). The analysis summarizes total steel supply by product from 2003 through March 2019 and year-on-year […]
The competitiveness of steel continues to lose ground against aluminum and plastic, according to the latest data from the Bureau of Labor Statistics. Cold rolled steel sheet has become less competitive against aluminum sheet in the last year and this has carried through to steel and aluminum cans. Steel tubular goods have lost ground to […]