Business activity in the state of New York has recently declined, according to the Empire State Manufacturing Survey responses collected by the Federal Reserve Bank of New York between Oct. 3 and Oct. 11. The survey’s headline general business conditions index dropped to -9.1 for October, maintaining a negative value for the third straight month. The index […]
By CRU Senior Analyst Ryan McKinley, from CRU’s Steel Sheet Products Monitor Sheet prices took split paths between eastern and western regions. Prices in Asia found support from restocking in China and supply disruptions in South Korea. Meanwhile, western markets remained weak, and we expect this to persist over the near term. October is the […]
Flash Steelworks, Inc. is breaking ground on a $12.1 million armor and military-grade plate manufacturing facility in Middlesboro, Ky., the company said in an Oct. 12 release. “Starting in Middlesboro, we will deploy leading-edge advanced steel technology and products in what is planned to be a regional industrial hub,” said Gary Cola Jr., founder, and […]
The US and European Commission (EC) plan to accelerate global steel discussions in the coming weeks. US Trade Representative Katherine Tai and EC Executive Vice President Valdis Dombrovskis met last week in Washington to discuss ways to strengthen the trading and economic relationships between the two regions, Tai’s office said. Tai and Dombrovskis discussed the role […]
Editor’s note: SMU Contributor Michael D’Angelo is a researcher and trader at Marex who has been active in the metals markets for two years. In his role, Mike performs fundamental and quantitative analysis which directly leads to actionable trading/risk management strategies across the base, precious and ferrous metals derivative spaces. Prior to joining Marex, Mike received […]
The price advantaged once offered by foreign hot-rolled coil (HRC) over domestic steel is gone, according to Steel Market Update’s latest foreign versus domestic price analysis. Foreign prices are now higher than domestic prices after adjusting for freight costs, trader margins, and tariffs. Domestic HRC is priced as much as 2% below current foreign prices. The gap between US and foreign […]
Los Angeles-based JFE Shoji America Holdings Inc. successfully completed the acquisition of California Expanded Metal Products Co. (CEMCO), the company said in an Oct. 10 news release. The acquisition of the California-based cold-formed steel framing company expands JFE’s steel products business in the US. CEMCO will continue manufacturing products under the leadership of Tom Porter, CEMCO’s […]
The US labor market added 263,000 jobs in September, down for the second consecutive month but still better than expected. The result signals that the Federal Reserve will likely have to do more to slow it down. September was the slowest monthly gain in nearly a year and a half, according to the Bureau of […]
The US economy added 263,000 new jobs in September, slowing for the second straight month and marking the lowest monthly total since April 2021, according to data from the US Department of Labor. Despite the repeated decline in hiring, last month’s total was still solid by pre-pandemic standards and slightly ahead of the expected payroll […]
By CRU Research Analyst Yusu Mao, from CRU’s Steelmaking Raw Materials Monitor Turkish scrap prices rebounded on a fresh deal last week, for the first time since the beginning of September. Our assessment for HMS 1/2 80:20 rose to $365 per ton CFR, up by $21 per ton week-on-week (WoW) but down by $31 per ton […]
The number of active drilling rigs declined in the US this week, while Canadian counts increased, according to data from oilfield services company Baker Hughes. Activity in both the US and Canada has leveled out in recent weeks. The number of oil and gas rigs in operation is important to the steel industry because it […]
Cleveland-Cliffs Inc. is disputing the US International Trade Commission’s recent decision to allow antidumping and countervailing duties on cold-rolled steel flat products from Brazil to expire. In July, the ITC completed five-year sunset reviews of the AD and CVDs on cold-rolled imports. While the agency decided that the duties should remain in place for China, […]
Editor’s note: SMU Contributor David Feldstein is president of Rock Trading Advisors. Rock provides customers attached to the steel industry with commodity price risk management services and market intelligence. RTA is registered with the National Futures Association as a Commodity Trade Advisor. David has over 20 years of professional trading experience and has been active […]
The temptation to purchase foreign hot-rolled coil (HRC) at a bargain has all but faded again, with adjusted foreign prices now offering little or no advantage over domestic steel, according to Steel Market Update’s latest analysis. After taking freight costs, trader margins and tariffs into consideration, foreign HRC prices for two of the three regions […]
Zekelman Industries is closing its Long Beach, Calif., steel conduit manufacturing facility, pointing its finger at imports from Mexico as a major reason for the closure. The Long Beach facility, which employed 145 workers represented by the United Autoworkers union, manufactured steel conduit under the Western Tube and Wheatland Tube brand names. The Chicago-based company […]
Steel prices were steady to slightly down throughout the month of September, following declines seen in each of the four months prior. Hot-rolled prices averaged $780 per ton ($39.00 per cwt) the first week of September, falling to a low of $770 per ton in the third week of the month, and rising to $775 […]
The S&P Global US manufacturing PMI — another measure of manufacturing — edged up to 52 in September, up from 51.5 in August, recovering for the first time in three months after reaching its lowest level in two years. Last month’s recovery was driven by renewed expansions in output and new orders, though operating conditions across […]
US manufacturing activity grew at its slowest pace in nearly two-and-a-half years in September, according to the Institute for Supply Management (ISM). Though still expanding last month, manufacturing was slowed as new orders contracted amid aggressive interest rate increases from the Federal Reserve meant to cool demand and tame inflation. The ISM’s report also showed […]
With a total investment of $150 million Canadian (US$109.9 million), Tenaris recently consolidated its seamless and welded pipe manufacturing operations in Canada into one location in Sault Ste. Marie, Ontario, to better serve the country’s energy sector. An inauguration ceremony with company executives, customers, employees, and government officials was held on Sept. 27 to mark […]
JFE Shoji continues to invest and expand in North America. JFE Shoji Power Canada Inc. announced it will invest $20 million over the next 18 months to expand production of electrical transformer cores for use in oil-filled distribution and larger power transformer markets. This will increase its use of electrical steel, a product which is […]
By CRU Principal Economist Alex Tuckett, from CRU’s Global Economic Outlook September has reminded us how risky the current global environment is. Stubbornly high inflation, rapidly tightening monetary policy, tight energy markets, and a surging dollar are taking their toll on growth. And the more bad news keeps materializing. In eastern Europe, Russia’s partial mobilization […]
The US economy declined at a revised -0.6% in the second quarter of 2022, matching the most recent GDP estimate and confirming the economy shrank in the first six months of the year, according to the second estimate from the US Commerce Department’s Bureau of Economic Analysis (BEA). Gross domestic production (GDP) in Q2 contracted […]
The following article on the hot-rolled coil (HRC), scrap and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Hot Rolled Hot-rolled (HR) futures participants market watch as they wait for signs that demand will return even as the dollar continues to […]
The appeal to import foreign hot-rolled coil (HRC) in place of purchasing domestic steel remains low to non-existent, but that may be changing, according to our latest foreign versus domestic price analysis. Foreign prices were flat to down as much as $40 per net ton this week, while domestic prices increased $5 per ton. Foreign […]
World crude steel production recovered slightly month-on-moth (MoM) in August but remained down roughly 4% versus the same period last year. August’s output gained marginal grown when compared to July, up 0.9%, recovering for the first time in three months, according to World Steel Association (worldsteel) data. Global output was estimated at 150.6 million metric […]
US consumer confidence expanded again in September, extending a rebound in sentiment that began with a strong jump in August and reaching its highest level since April, The Conference Board reported. Results in September were better than expected, measuring 108 points and building on the 103.6 reading in August. The repeated gain and steady month-on-month […]
The US economy was balanced between “slight to modest” growth and softening in early July but is headed for “generally weak” in the next six to 12 months, the Federal Reserve said in its latest Beige Book report. The latest temperature check by the Fed on the state of the economy said the outlook for […]
Global crude steel production was estimated at 150.6 million metric tons in August as steelmakers around the world cut back on output by 6.2 million metric tons, or 4%, from the same period last year, the World Steel Association (worldsteel) reported. Last month’s estimated production was up sequentially, though, edging up by 0.9%, or 1.3 […]
The number of active drilling rigs increased in both the US and Canada this week, according to data from oilfield services company Baker Hughes. The number of oil and gas rigs in operation is important to the steel industry because it is a leading indicator of demand for oil country tubular goods (OCTG). The number […]
Altos Hornos de México (AHMSA) has restarted its electric arc furnace (EAF) in Monclova, Coahuila, which had been down since July due to a failure at its electrical substation. Work to repair the substation was slowed by difficulties in sourcing the right equipment, which in turn delayed the restart of the EAF, according to a […]