Steel Market Update is pleased to announce Michael Smerconish will be a keynote speaker at the 2020 SMU Steel Summit Conference, which will be held in Atlanta on Aug. 24-26. This will be the second time Smerconish has spoken at our conference. With 2020 being a presidential election year, and with the Republican National Convention […]
By CRU Analyst Chris Bandmann, from CRU’s Steel Long Products Monitor Europe: Germany has not seen any significant snowfall yet this winter, and these mild conditions had the potential to support the continuation of construction activities. Construction companies entered their holidays regardless, however, and steel demand has settled into a seasonal low point. Even so, […]
Steel Market Update’s 31st Steel 101: Introduction to Steel Making & Market Fundamentals Workshop, set for Merrillville, Ind., on March 31 and April 1, is now taking registrations. We will be working out of the Hilton Garden Inn in Merrillville, a short drive away from the NLMK Portage steel mill, which we will tour on […]
Steel Market Update’s 31st Steel 101: Introduction to Steel Making & Market Fundamentals Workshop, set for Merrillville, Ind., on March 31 and April 1, is now taking registrations. We will be working out of the Hilton Garden Inn in Merrillville, a short drive away from the NLMK Portage steel mill, which we will tour on […]
I spent today working on two projects. First was contacting and communicating with flat rolled and plate steel buyers in order to get a sense of the current spot price offers/transactions and where the markets are heading over the near term. The second project was working on the 2020 SMU Steel Summit Conference. As with […]
An update on the 2020 SMU Steel Summit Conference. My team has been very active in soliciting and confirming agenda slots and speakers to go with those spots. Today we confirmed CNN’s Michael Smerconish as a special keynote speaker on Wednesday, Aug. 26. He will be covering the Republican National Convention (which is happening at […]
Written by: John Packard, President & CEO Steel Market Update Your customer will tell you what you need to know. The key is to listen. The key is to suppress your temptation to dominate the conversation. Brian Buckalew, Vice President of Business Development, Majestic Steel, recently wrote in a LinkedIn post: “People that are not […]
The following article discussing the global ferrous derivatives markets was written by David Feldstein. As an independent steel market analyst, advisor and trader, we believe he provides insightful commentary and trading ideas to our readers. Note that Steel Market Update does not take any positions on HRC or scrap trading, and any recommendations or comments […]
I was taking a deeper dive into some of the data compiled from last week’s flat rolled and plate steel market trends analysis. Having added about 50+ new companies to our survey, we now send invitations to 500+ individuals who actively participate in the flat rolled or plate steel markets. On purpose, we concentrate on […]
As widely expected, Nucor was the first to announce another $40 increase in flat rolled steel prices today. Other steelmakers are likely to follow suit. This represents the fifth round of price hikes by the major mills since late October totaling around $190 per ton. In a letter dated Jan. 8, Nucor’s Sheet Mill Group […]
Demand for exhibition booths has increased steadily over the 10 years of Steel Market Update’s Steel Summit Conference. This year, SMU has doubled the exhibition space and made several improvements in the traffic flow of the hall. To better serve attendees during breaks and the networking receptions, we have increased the number of food and […]
At the end of August, Steel Market Update will host our 10th SMU Steel Summit Conference. Our conference will be the largest flat rolled and plate steel event in North America during this calendar year. The 2020 SMU Steel Summit Conference is going to be our best attended and most informative conference yet as 1,200 […]
At the end of August, Steel Market Update will host our 10th SMU Steel Summit Conference. Our conference will be the largest flat rolled and plate steel event in North America during this calendar year. The 2020 SMU Steel Summit Conference is going to be our best attended and most informative conference yet as 1,200 […]
U.S. Steel announced today that it intends to “indefinitely idle” a significant portion of its Great Lakes Works operation near Detroit. The decision was made to better align the company with its three core flat rolled operations and advance its “best of both strategy” as an integrated and EAF company. U.S. Steel expects to begin idling […]
I have been extremely busy working on the keynote speakers for the 2020 SMU Steel Summit Conference. Based on the moves I am making right now, I believe we will have the strongest program ever – especially on the final day of the conference. I don’t want to totally tip my hand quite yet as […]
Registration for the 2020 SMU Steel Summit Conference is now open. You can register through our website: www.SteelMarketUpdate.com/Events/Steel-Summit or through the CRU website. 2020 Conference Dates: Monday, Aug. 24-Wednesday, Aug. 26 Location: Georgia International Convention Center (www.gicc.com) same location as 2019. Cost: $1,375 per person (same as 2019) with $100 per person discounts for SMU/CRU […]
The following article discussing the global ferrous derivatives markets was written by David Feldstein. As an independent steel market analyst, advisor and trader, we believe he provides insightful commentary and trading ideas to our readers. Note that Steel Market Update does not take any positions on HRC or scrap trading, and any recommendations or comments […]
What’s ahead for the scrap market in 2020? Ben Abrams, president and CEO of Consolidated Scrap Resources, Inc., in York, Pa., offers the following prognostication: It’s always difficult to predict what will happen to ferrous scrap prices even a few months ahead of time, let alone for the full year, because the ferrous market is […]
SMU Events is pleased to update the status of our popular Steel 101: Introduction to Steel Making & Market Fundamentals Workshops as well as more information on the 2020 SMU Steel Summit Conference. For those interested in attending one of our Steel 101 workshops. Our California workshop is now 90 percent full. We have approximately […]
Cleveland-Cliffs and AK Steel Holdings surprised the market this morning, announcing the merger of their two companies. Under a definitive merger agreement, Cleveland-Cliffs will acquire all the issued and outstanding stock of AK Steel at $3.35 per share or $1.1 billion. Cliffs Chairman and CEO Lourenco Goncalves will lead the expanded organization and AK Steel […]
This morning President Trump tweeted that due to currency manipulation by Brazil and Argentina, he intends to place 25 percent tariffs on steel from both countries, and a 10 percent tariff on aluminum. His tweet has created a great deal of confusion in the U.S. steel markets. Steel Market Update is attempting to help calm […]
A water pipe break at U.S. Steel Gary Works has resulted in the shutdown of all furnaces at the facility due to safety concerns. Said U.S. Steel spokeswoman Amanda Malkowski, “On November 27, U.S. Steel reported a service water leak that caused flooding at our Gary Works facility near our blast furnace operations. As a […]
U.S. Steel and ArcelorMittal USA raised flat rolled by an additional $30 per ton ($1.50/cwt) on Friday as the mills seek to maintain the upward momentum on steel prices. Other mills are likely to follow suit. The latest announcements follow on two earlier increases of $40 per ton in late October and early November. U.S. […]
On Friday morning, SSAB announced another steel plate price increase. In a letter emailed to customers, SSAB advised their intention to raise “transaction prices by a minimum of $40 per ton effective immediately for all new non-contract orders.” The increase, which is the second $40 increase announced by SSAB so far this month, applies to […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: As the Section 232 tariffs continue, their market effects continue to pile up. The tariffs cause effects on investment and employment, both for steel producers and their customers. Tariffs reduce imports of steel, for example, but they increase […]
Virgin steel is made with iron ore, coke and limestone. It was done that way, and only that way, for many decades. Then along came the “mini” mills. So-called minimills recycle ferrous scrap, mixing it with pig iron or other iron units and melting it down in large electric arc furnaces to produce new steel. […]
The domestic steel mills were busy on Friday with SSAB USA announcing a $40 per ton price increase on steel plate, and then U.S. Steel coming out with a $30 per ton price increase on flat rolled. The SSAB increase was the second on plate this month. Flat rolled has seen three price increase announcements […]
It’s not too soon to save the date for next year’s SMU Steel Summit 2020, set for Aug. 24-26 in Atlanta. Just click the image below for details. We are delighted to announce details of the 10th SMU Steel Summit, which will again be held in Atlanta in 2020. Widely regarded as the premier steel […]
As part of our process of strengthening Steel Market Update’s services, we have made some additions and improvements. After reviewing our subscription models and receiving feedback from our valued customers, we have streamlined our membership options. We believe these changes will be beneficial for our members and allow for greater access to the service. The […]
There is one constant to our SMU Steel 101: Introduction to Steel Making & Market Fundamentals Workshop – just about everyone who takes the workshop enjoys it and sees the value in the subject matter being taught. This has resulted in many of our past attendees working their way up within their company’s management structure. […]