Eariler this week, SMU polled steel buyers on a variety of subjects including current and future steel prices, price increase announcements, supply, demand, and new mill capacity. Rather than summarizing the comments we received, we are sharing them in each buyer’s own words. We want to hear your thoughts, too! Contact Brett@SteelMarketUpdate.com to be included […]
Nucor announced a price hike on Monday, and our HRC price is up modestly for the first time since mid-April. It’s too early to say whether those two trends are related. Our HRC price went up $15 per ton. Nucor’s price increase was $50 per ton, and the jury is still out on whether it […]
I mentioned in my last Final Thoughts that I’d been surprised to see hot-rolled coil lead times inch up, even if only modestly so. I cautioned at the time not to make too much of just one data point or to call a trend based on just one survey. That big caveat aside, as we […]
The US International Trade Commission (ITC) recently conducted hearings on the future of the Section 232 tariffs on steel and aluminum as well as on the Section 301 tariffs on imports from China. Congress mandated the ITC investigation in response to calls for the tariffs to be reduced or eliminated to fight inflation. Unlike the […]
Final Census data shows that June steel imports totalled 2.84 million net tons, 24,000 tons higher than preliminary figures reported last week. June imports are down 8% compared to March’s 26-month high of 3.09 million tons. Import licenses for July now total 2.57 million tons through Aug. 3rd data. This is up from 2.15 million […]
Additional antidumping and countervailing duty rates on imports of corrosion-resistant steel flat products have been updated by the US Department of Commerce. In the preliminary results of an administrative review looking at the period July 1, 2020, through June 30, 2021, Commerce updated the weighted-average dumping margins for three Taiwanese companies. Preliminary rates were set […]
The appeal to purchase foreign hot-rolled coil (HRC) further faded this week, with foreign prices now in close quarters to domestic steel, according to Steel Market Update’s latest analysis. Since mid-May, US steel prices have generally declined at a faster rate than foreign prices, meaning the potential discount on imported products has been shrinking for […]
Another Russian steelmaker has been sanctioned by the US government in response to Russia’s ongoing war in Ukraine. The US Department of Treasury officially sanctioned Russian steelmaker Magnitogorsk Iron and Steel Works (MMK) and its majority owner Viktor Filippovich Rashnikov. MMK’s subsidiaries MMK-FINANS and MMK Metalurji were added to the list as well. The companies […]
The US International Trade Commission is not afraid to air out dirty laundry. On August 3, the USITC ruled to maintain the existing antidumping duties on imports of large residential washing machines from China. The duties have been in place since 2016. Under the current order, a large residential washing machine is considered to be any […]
Ternium executives provided an update on the company’s new Pesquería hot strip mill and plans for a greenfield electric-arc furnace in North America on the company’s second quarter earnings conference call on Wednesday, August 3. Weak demand and falling prices are impacting the company, but it remains positive on its plans moving forward. Updates on […]
ArcelorMittal SA has agreed to buy Brazilian steelmaker Companhia Siderúrgica do Pecém (CSP) from Brazilian iron ore miner Vale SA and shareholders. The deal is worth $2.2 billion and is expected to be completed late this year. CSP is a joint venture between Vale, which holds a 50% stake in the company, and South Korean steelmakers […]
US plate prices were largely unchanged this week, but probably not for long now that Nucor has significantly lowered plate prices with the opening of its September plate order book. The move came after Nucor in early July kept prices flat with the opening of its August order book. Discrete plate prices, as well as prices […]
By Greg Wittbecker, Advisor, CRU Group US International Trade Commission hearings provide little direction Last week in DC, the US International Trade Commission (ITC) held a series of public meetings and hearings to take comments on current Section 232 tariffs. Representatives from throughout the value chain were in attendance. The Aluminum Association participated in a […]
Preliminary Census data indicates that June steel imports will total 2.81 million net tons, just 61,000 tons higher than May levels. June figures are down 9% compared to March’s 26-month high of 3.09 million tons. Import licenses for July are currently at 2.15 million tons through July 25th data. (July figures are expected to increase as import […]
Foreign hot-rolled steel imports have all but lost their appeal this week and are now at levels comparable to domestic steel prices, according to Steel Market Update’s latest analysis. Since mid May, US steel prices have generally declined at a faster rate than foreign prices, meaning the potential discount on imported products has been shrinking […]
On Monday and Tuesday of this week, SMU polled steel buyers on a variety of subjects including steel prices, supply and demand, and new mill capacity. We are sharing some of the comments we received in each buyer’s own words rather than summarizing them in ours. Want to have your voice heard? Contact Brett@SteelMarketUpdate.com to […]
Eyes glaze over when trade laws are discussed. Despite this, I think it useful to delve a bit into details on occasion. A couple of recent developments prompt me to do so this week. First, the US International Trade Commission (ITC) voted unanimously last week that material injury was not done to the domestic industry […]
We were close to peak steel prices this time a year ago. Are we now close to peak pessimism? Your answer to that question might depend on whether you’re working at a steel mill or at a service center. We’ve noticed a big split in sentiment lately. Roughly 40% of respondents to our surveys – […]
New sheet and plate capacity from Nucor will be entering the market in force by the end of this year, just in time for an anticipated increase in infrastructure demand, company executives said. Whether those facilities ramp up to their nameplate capacity will ultimately depend on demand, they added. “While we recognize there is considerable […]
The appeal to import cheaper foreign hot-rolled coil (HRC) instead of domestic steel continues to lessen, according to Steel Market Update’s latest foreign versus domestic price comparison. For the past two months, domestic steel prices have generally declined at a faster rate than foreign prices, meaning the potential discount on imported products has been shrinking. After […]
The US International Trade Commission has completed five-year sunset reviews of import duties on cold-rolled steel flat products from six countries. While determining that the duties on imports from five of the countries should be continued, the ITC also decided to allow the duties on Brazilian product to expire. The ITC conducted full sunset reviews […]
Flat Rolled = 55 Shipping Days of Supply Plate = 54.7 Shipping Days of Supply Flat Rolled US service center flat rolled inventories edged up in June. At the end of June, service centers carried 55 shipping days of supply on an adjusted basis, according to SMU data. This was up from 54.7 shipping days […]
President Biden visited the Middle East last week. He touched down at Andrews Air Force Base in Maryland early Sunday morning. Every presidential trip is and must be evaluated by what else is going on. This one was originally billed as routine: to attend a summit meeting of the Gulf Cooperation Council (GCC), a group […]
Kaiser declares force majeure due to an inability to secure its required magnesium Kaiser Aluminum, which operates a major aluminum can sheet rolling mill in Warrick, Ind., declared force majeure on July 8, citing its inability to obtain enough magnesium to sustain its production. Kaiser’s mill specializes in the production of food container and beverage […]
US imports of corrosion-resistant steel products from five origins will continue to be subject to antidumping and countervailing duties for at least another five years. The US International Trade Commission concluded five-year sunset reviews of the duties on the imports from China, India, Italy, South Korea, and Taiwan, determining that allowing the duties to expire, […]
Total mill shipments of steel products grew in May, after shrinking the month prior. May’s mill shipments totaled 8.38 million tons, a 3.1% increase from April’s 8.12 million tons. Apparent supply also recovered in May, up 3.9% versus the prior month. This analysis is based on steel mill shipment data from the American Iron and Steel Institute […]
Imported sheet and plate products arrived at US ports at a slower pace in May, resulting in them accounting for a lower share of the domestic market, according to Commerce Department data. Imports’ share of US sheet and plate markets peaked in December, reaching their highest levels in the past 4.5 years. The trend was […]
Sheet prices continued to slide this week and plate prices to defy gravity. If there is an upside, it’s that the pace of sheet declines has moderated slightly. SMU’s hot-rolled coil price now stands at $910 per ton ($45.50 per cwt), down $45 per ton from $955 per ton a week ago and down $190 […]
US apparent steel supply increased 4% from April to May, rising to 9.48 million net tons, according to the latest US Department of Commerce and American Iron and Steel Institute data. Recall that supply reached a six-year high last September at 9.92 million tons, declining each month through February. May’s supply level is now the […]
I promised there would be more “Final Thoughts” from me before I retire. Today, I am going to write about conversations I had with steel buyers late last week about the market. But first, a couple of key reminders that are important (at least to me): • SMU Steel Summit Conference = 43 days (Aug. […]