NLMK USA has filed a complaint with the U.S. Court of International Trade alleging that NLMK’s requests for steel slab exclusions from Section 232 of the Trade Expansion Act have been wrongfully denied. The Indiana and Pennsylvania mills use imported steel slab to process into finished products. The 250-255 mm thick slab (nominally “10 inch”) […]
Steel Market Update raised its Flat Rolled Price Momentum Indicator to Neutral yesterday from Lower in anticipation of a price hike believed imminent from the mills. As expected, Nucor and U.S. Steel both announced increases today of $40 per net ton on all new spot orders of hot rolled, cold rolled and galvanized steel, effective […]
Steel Market Update raised its Flat Rolled Price Momentum Indicator to Neutral yesterday from Lower in anticipation of a price hike believed imminent from the mills. As expected, Nucor and U.S. Steel both announced increases today of $40 per net ton on all new spot orders of hot rolled, cold rolled and galvanized steel, effective […]
Steel Market Update is revising our Price Momentum Indicator on flat rolled to Neutral from Lower. Sometimes you need a bit of a prod in order to see things clearly. We’ve had many conversations and reviews of the spot pricing data and came to the conclusion the timing of our move to Lower was incorrect. […]
Written by: John Packard, President & CEO, Steel Market Update Steel prices in general appear to have weakened further for the fifth week, based on Steel Market Update’s canvass of the market over the past two days. Hindsight being 20/20, SMU arguably could have adjusted its Price Momentum Indicator from Neutral to Lower earlier than […]
We have adjusted our plate price momentum indicator from neutral to lower. Prices have been dropping over the past couple of weeks, and steel buyers are very negative on the markets right now (see some of the comments in an article above). I have to tell you I am really struggling with all of the […]
“Transformational” is what Cleveland-Cliffs CEO Lourenco Goncalves called the acquisition of AK Steel in remarks during the Q4 2019 earnings call Thursday. “With the acquisition of AK Steel, Cleveland-Cliffs becomes the most relevant supplier of steel to the automotive industry in the United States, fully integrated from iron ore in the ground to auto parts […]
It is rare that market direction is clear and uncontested. There have been a few times during my 42-year steel career when it was obvious prices were going to be higher tomorrow than they are today. It was during one of those times in history that I began writing a note to my steel buying […]
It is rare that market direction is clear and uncontested. There have been a few times during my 42-year steel career when it was obvious steel prices were going to be higher tomorrow than they are today. It was during one of those times in history that I began writing a note to my steel […]
While America’s integrated steel producers are investing millions in R&D to reduce harmful emissions from their steelmaking process, the nation’s minimill steel producers have already claimed the high ground for environmental stewardship. Integrated mills and their blast furnaces heat iron ore and coking coal at high temperatures to produce high-quality virgin pig iron and steel. […]
The Super Bowl is done, the Grammys are behind us, the Oscars selected a foreign film (Parasite from South Korea) for the first time as Best Movie. The Iowa caucus presented more questions than answers. Today is the New Hampshire primary and the first votes finally are being cast to see who the Democrats will […]
I spent the second half of last week in Tampa where I was the master of ceremonies for the 31st Tampa Steel Conference hosted by the Port of Tampa. John Anton, IHS Markit Director of Steel Analytics / Pricing and Purchasing Service, provided the key economic and steel forecast for the group. He told the […]
As advanced as steelmaking has become, producing steel is still an inherently carbon- and energy-intensive process. Steel mills in the United States and the rest of the world find themselves in the crosshairs of the many environmental and political groups now calling for dramatic steps to reduce harmful air emissions and slow the pace of […]
Demand is looking good for the steel industry this year, especially in the construction sector, said panel members on the Steel Manufacturers Association media call today. Dave Sumoski, Nucor Executive Vice President – Merchant and Rebar Products, noted that construction is a major area for Nucor. The market for steel bar is very strong with […]
Nucor beat analysts’ estimates for the fourth quarter, reporting net earnings of $107.8 million due to an unexpected surge in sales during December. “Stronger than expected steel mill segment performance in December was the primary driver for higher actual fourth-quarter earnings than we indicated in our mid-December quantitative guidance,” said Leon Topalian, Nucor’s new president […]
The benchmark price for hot rolled steel dipped by about $20 last week to an average price of $590 per ton, according to Steel Market Update data. Despite the small decline, most of the steel buyers responding to SMU’s latest market trends questionnaire believe prices still have upward momentum. Let’s look at the data for […]
As we worked through pricing data this week, it was evident that much of the spot buying has occurred over the past couple of months. In our HARDI steel conference call this morning, those on the call who reported their inventory levels told the group they were either carrying inventories that were higher than normal […]
The wind energy industry received a boost from a U.S. spending bill approved in December. The bill extends energy tax credits for wind, solar and other green energy projects to 2024. Due to the extension, IHS Markit is now expecting a boom rather than a decline for the industry in 2020. The extension increased the […]
I spent today working on two projects. First was contacting and communicating with flat rolled and plate steel buyers in order to get a sense of the current spot price offers/transactions and where the markets are heading over the near term. The second project was working on the 2020 SMU Steel Summit Conference. As with […]
An update on the 2020 SMU Steel Summit Conference. My team has been very active in soliciting and confirming agenda slots and speakers to go with those spots. Today we confirmed CNN’s Michael Smerconish as a special keynote speaker on Wednesday, Aug. 26. He will be covering the Republican National Convention (which is happening at […]
As widely expected, Nucor was the first to announce another $40 increase in flat rolled steel prices Wednesday, followed closely by ArcelorMittal USA, NLMK USA, California Steel Industries, USS-POSCO Industries and Algoma Steel. This represents the fifth round of price hikes by the major mills since late October totaling around $190 per ton. In a […]
The following article discussing the global ferrous derivatives markets was written by David Feldstein. As an independent steel market analyst, advisor and trader, we believe he provides insightful commentary and trading ideas to our readers. Note that Steel Market Update does not take any positions on HRC or scrap trading, and any recommendations or comments […]
I was taking a deeper dive into some of the data compiled from last week’s flat rolled and plate steel market trends analysis. Having added about 50+ new companies to our survey, we now send invitations to 500+ individuals who actively participate in the flat rolled or plate steel markets. On purpose, we concentrate on […]
As widely expected, Nucor was the first to announce another $40 increase in flat rolled steel prices today. Other steelmakers are likely to follow suit. This represents the fifth round of price hikes by the major mills since late October totaling around $190 per ton. In a letter dated Jan. 8, Nucor’s Sheet Mill Group […]
John Packard is traveling…. As always, the holiday break put the brakes on buying, making it a challenge to gauge steel prices in the first week of 2020. But it appears the upward price momentum has continued into the New Year. Steel Market Update’s survey of the market over the past two days shows flat […]
Climate change is moving up the political agenda in countries around the world, putting increasing pressure on industries such as steel to reduce greenhouse gases. Globally, the steel industry is responsible for around 5 percent of total CO2 emissions. Steelmakers are responding with plans for mills that run on solar or wind energy and are […]
First issue of the New Year. For that matter, today is the first issue of the new decade. It will probably take awhile to get used to 2020 vs. 2019. Of course, with the political climate and it being an election year, maybe we will have 2020 ingrained in our heads sooner rather than later. […]
Welcome back from the Christmas Holidays. This is the 149th Executive level issue of Steel Market Update produced during calendar year 2019. It is also anticipated to be the last Executive issue prior to the New Year. On Monday we will publish our last Premium issue of the year, our 49th for 2019. Christmas and […]
Fitch Ratings, a global leader in credit ratings and research, is forecasting a negative outlook for the global steel industry in 2020 and challenging conditions in North America. The Fitch Ratings 2020 Outlook: Global Steel notes weaker economic growth impacted by ongoing trade and geopolitical tensions. “Over the past two years companies have talked at […]
Nucor Steel says it will add a new coil paint line at its Mississippi County sheet mill in Arkansas. The new coil paint line will have a capacity of 250,000 tons per year and is expected to start up in the first half of 2022. “The new coil paint line will diversify our product and […]